REPAIRS TO 8000 GPH X 250 METER HEAD PUMP UNIT NO. 02 INSTALLED AT PUMPING STATION JIB STAGE 1ST (NEW) AND 140 AMPERE LT CONTROL PANEL ALONG WITH ALLIED WORKS AT PUMPING STATION GARNAI STAGE 0

Amount

Repair to 8000 GPH x 250 meter head pump unit no. 02 installed at pumping station Jib stage 1st (New) by way of disconnecting of all electrical connections, decoupling of pump from motor, unfastening from base frame, suction and delivery and shifting to work shop by mechanical transportation. Dismantling the pumping unit and extraction of internal parts. Replacement of pump shaft, damaged impellers-4 nos.,diffusers-5nos. , neck rings- 3 nos., diffuser bushes – 5 nos., impeller bushes – 3 nos., 02 nos. shaft protection sleeves- 02nos. gland cups -02nos., DE and NDE bearings with corresponding new components conforming to same size and specifications as per old samples. Assembling the pump and then shifting back to pumping station and then by manual labour, tools and tackles and mechanical transport . Fitment of pump on base frame Coupling pump and motor after making proper alignment& leveling and testing the pump set on no load and then on full load at site. Complete job includes cost of material, labour charges, to and fro,manual carriage charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Repairs to 415v, 3 phase, and 140 ampere LT control panel cum fault analyzer cum auto starter Installed at pumping station Garnai stage 0 .The job involves dismantling of all the incoming and outgoing power cables from the panel and shifting to workshop. Replacement of damaged fault analyzer and 140 ampere main and delta power contactor-MNX-140-2 nos. of star delta auto starter with new components conforming to same rating and specifications as per old sample. Assembling the unit and shifting back, fitment at site. The scope of work also covers replacement of 150mm2 3.5 core Aluminum cable (30mtrs approx.) by way of isolating the system from incoming HT, extraction / removal of worn-out/damaged aluminum cable from the fuse system to the voltage stabilizer by using skilled labour and suitable tool/tackles and thereafter replacement with new aluminum cable conforming to relevant ISO/ISI standards from fuse system to the voltage stabilizer ( 30 mtrs. approx) complete with laying, crimping, thimbling, insulation work etc. Testing of the complete system without load and thereafter on full load... Job includes the cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

M/S ALLIED ENGINEERS

AMIT SALES CORPORATION