Loading
Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.2 L
Closing Date
5 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum averageannual contractual turnover of V/N or V whichever is less; where V=Advertised value of the tender in crores of Rupees. N= Number of yearsprescribed for completion of work for which bids have been invited. Theaverage annual contractual turnover shall be calculated as an average of"total contractual payments" in the previous three financial years, as perthe audited balance sheet. However, in case balance sheet of theprevious year is yet to be prepared/ audited, the audited balance sheetof the fourth previous year shall be considered for calculating averageannual contractual turnover. The tenderers shall submit requisiteinformation as per Annexure-F, along with copies of Audited BalanceSheets duly certified by the Chartered Accountant/ Certificate fromChartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The tenderer shall possess a valid Electrical ContractorLicense, issued by any State Government or Union TerritoryAdministration, authorizing execution of electrical works up to 11 kV. Thecontractor shall have in his employment or shall engage a person holdinga valid certificate of competency issued by any State Government orUnion Territory Administration for supervision of electrical works up to 11kV. Offers not accompanied by a valid Electrical Contractor License andrequisite Supervisor competency for works up to 11 kV shall besummarily rejected Note: In case of expiry of validity of license duringcontract, the contractor should renew the license so that it is alwaysvalid during contract).
Technical Eligibility Criteria: (a) The tenderer must have successfullycompleted or substantially completed any of the following during last 07(seven) years, ending last day of month before the one in which tender isinvited: Three similar works costing not less than the amount equal to30% of advertised value of the tender, or Two similar works costing notless than the amount equal to 40% of advertised value of the tender, orOne similar work costing not less than the amount equal to 60% ofadvertised value of the tender. (i) In case of composite works (e.g.,works involving more than one distinct component, such as CivilEngineering works, S&T works, Electrical works, OHE works etc. and inthe case of major bridges - substructure, superstructure etc.), tenderermust have successfully completed or substantially completed any of thefollowing during last 07 (seven) years, ending last day of month beforethe one in which tender is invited: Three similar works costing not lessthan the amount equal to 30% of advertised value of each component oftender, or Two similar works costing not less than the amount equal to40% of advertised value of each component of tender, or One similarwork costing not less than the amount equal to 60% of advertised valueof each component of tender.
Similar nature of work::- Works of supply, installation, testing and commissioning of substation (with or without supply of transformers/substation equipments) for 11kV or above, with at least 50% capacity of the proposed substation kVA rating.
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Name of the Work:- Provision of ring main unit (RMU) and Panel rooms at Electrical substations over Nanded Division-Electrical Arrangements
NED-E-25-2026-27~SCR
NED-E-25-2026-27
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹4.2 L
12 Sept 2026
12 Sept 2026
21 Sept 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,08,41,571 | ||
| — | 8.00 | — | — | ||
| Supply, installation, testing and commissioning of 11kV, 630A, 21kA/ 3Sec,4way, extensible, outdoor, motorized RMU comprising 4 circuit breaker (VCB), AEGIS Type: M+VVVV+ as per enclosed specification. Make: ABB/L&T /SIEMENS/SCHNEIDER/LUCY | — | — | — | 1,49,69,440 | |
| — | 1000.00 | — | — | ||
| Supplying, erecting & terminating 3 x120 sq. mm. aluminium 11 kV(UG)HT, XLPE armoured cable onwall/ceiling or laid in provided trench /pipe in an approved manner as perspecification No.IS 7098. Part-II(latest) | — | — | — | 9,63,000 | |
| — | 96.00 | — | — | ||
| Providing and erecting Heat shrinkable outdoor termination kit for11 kV (E) XLPE HT cable 3x120 sq.mm. with necessary material as per specification | — | — | — | 7,01,184 | |
| — | 2000.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 22,000 | |
| — | 32.00 | — | — | ||
| Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3malong with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete as per RDSO specification No.RDSO/PE/SPEC/PS/0109(Rev.0)-2008. | — | — | — | 3,79,616 | |
| — | 280.00 | — | — | ||
| Supply, fabrication, laying, welding and connection of GI Flat of size 25x3mm from earth pit with GI nut Bolt suitable size | — | — | — | 26,320 | |
| — | 15.00 | — | — | ||
| Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/ concreting in ratio 1:3:6 | — | — | — | 91,065 | |
| — | 48.00 | — | — | ||
| Dismantling of Four pole structures (Cutting and shifting of rail pole and other items of the 4 pole structure to the Depot/mentioned location as per the site condition) | — | — | — | 2,24,448 | |
| — | 1000.00 | — | — | ||
| Supply and laying of 4 core 240 sqmm crosslinked polyethylene (XLPE)insulated LT UGcable, PVC outersheathed, armored withgalvanizedround steel wire or steel stripandwith Aluminium conductorsuitable for ratedvoltage at 1100volts grade and conformingtoIS:7098 (Part- 1)/1988 with amdt.no. 1, 2& 3 (reaffirmed 2005) orlatest.Make- Polycab, Finecab,Havells or similar | — | — | — | 13,66,000 | |
| — | 120.00 | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) inthe PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceilingrose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete forlight points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 79,680 | |
| — | 400.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 40,400 | |
| — | 300.00 | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 45,600 | |
| — | 180.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 32,220 | |
| — | 960.00 | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 46,080 | |
| — | 56.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular controlswitch on existing control board with wiring. | — | — | — | 19,432 | |
| — | 28.00 | — | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control includingall accessories. | — | — | — | 11,984 | |
| — | 14.00 | — | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 5,768 | |
| — | 28.00 | — | — | ||
| Supply and fixing of metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make or its equivalent with 6 module cover plate (With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 7,420 | |
| — | 10.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latestamendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 34,560 | |
| — | 20.00 | — | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 13,100 | |
| — | 20.00 | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 4,540 | |
| — | 10.00 | — | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 7,010 | |
| — | 42.00 | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extension wires etc for fixing) as per attached railway specification | — | — | — | 16,170 | |
| — | 500.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathedAluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs andterminations complete. | — | — | — | 70,500 | |
| — | 14.00 | — | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55/IP 65 with metric knockouts for cable entry Cablejunction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92,IEC 60947-3 with its latestamendments, with necessary terminals suitable for cables upto 50 Sq mm and all necessary accessoriescomplete. | — | — | — | 1,02,354 | |
| — | 100.00 | — | — | ||
| Supply and fixing of 10W LEDtube light 6500K (Cool DayLight) suitable to operate on230V 50Hz AC supply should besimilar to cat no.D531065 ofWipro make be as per detailedspecification | — | — | — | 32,200 | |
| — | 180.00 | — | — | ||
| Supply and laying of 32 mm dia 2 mm thick PVC pipe (ISI mark) concealed in roof slab and wall withall required accessories including masonry work(chipping etc.) and labour charges etc (for main tosub mains). | — | — | — | 11,340 | |
| — | 30.00 | — | — | ||
| Supply and fixing of 40 W LED type weatherproof street light fitting complete with allaccessories and conforming to specification no. Make: Bajaj/Havells/ Philips or similar | — | — | — | 75,480 | |
| — | 20.00 | — | — | ||
| Supply and fixing of Ventilating Fans(Exhaust fan) of 4 pole 300 mm sweep sizewith metalic body with capacitorconforming to IS No.2312/67 (Reaffirmed 2005) complete with louver and all connected accessories. Make: Havells/CG/Bajaj/Khaitan or similar | — | — | — | 45,600 | |
| — | 10.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification (including digging earth pit, electrode earth box with reinforced concrete complete with all connected materials and works including connecting the earth electrode and aerial earthing according to IS 3043 and RDSO drawing ETI/OHE/P/7021 in other than substations. | — | — | — | 37,980 | |
| — | 10.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB's on iron frame/laminated board as per specification No. SW-SWR/MCBDB with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner Make: Legrand/Havells/L&T or similar | — | — | — | 16,230 | |
| — | 2000.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80grade in PN-4 outer dia of HDPE pipe110mm (nearest 4"" dia) and wallthickness minimum 4.1 mm maximum 4.3mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto | — | — | — | 6,24,000 | |
| — | 500.00 | — | — | ||
| Supply, erecting and laying of HDPE pipeof PE-80 grade in PN-4 outer dia of HDPEpipe 63 mm (nearest 2" dia) and wallthickness minimum 2.5 mm maximum 2.8mm with "T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto | — | — | — | 62,000 | |
| — | 400.00 | — | — | ||
| "Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30cm widex90cm deep oad etc., for laying of HT/LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and asper directions of Rly.Engineer." | — | — | — | 81,200 | |
| — | 800.00 | — | — | ||
| Excavation of cable trench 30 cmwidex90cm deep in all types of soils for HT/LTUG cable as per specification | — | — | — | 97,600 | |
| — | 15.00 | — | — | ||
| SUPPLY OF HEAVY DUTY STORAGE RACKS OF SIZE: 3000W X 750 D X 2700 H AS PER DRAWING ENCLOSED IN ANNEXURE -A AND THE DETAILED SPECIFICATIONS MENTIONED IN ANNEXURE -B. MAKE: GODREJ INTERIO (OR) VM (OR) IKEA (OR) FEATHERLITE (OR) DURIAN OR ITS SIMILAR | — | — | — | 4,78,050 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlips1to12_compressed.pdf
ATTACHMENT
RitesInspectionLetter.pdf
ATTACHMENT
specifications_merged.pdf
ATTACHMENT
TenNED-E-25-2026-27RMUandPanelRooms.pdf
ATTACHMENT
Earthing specifications
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .