PROVN OF LED SECURITY LIGHT WITH (9 MTR LONG STEEL TUBLAR) POLE FROM OP-3 GATE TO GP NO 05 OF COD RESTRICTED AREA AND 01 X HIGH MAST LIGHT (15 MTR HEIGHT) AT COD AND 02 X HIGH MAST LIGHT (15 MTR HEIGHT) FOR (RSSD AND TRANS SUB DEPOT) RESTRICTED AREA

Amount

Supply and fix steel tubular swaged poles type 410 SP-31 (9 meter long) complete with CI base plate and finial including necessary nut bolting, excavation in any type of strata, returning filling removal, PCC 1:3:6 type C-2, PCC coping, PCC 1:3:6 type C-1 in coping etc foundation and coping complete all as specified and directed.

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Supplying and laying un-reinforced precast concrete cable cover, class LVP, type 1 with peak, size 300mm x 180mm x 40mm laid in trenches for under ground cable all as specified.

M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire, armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 25 Sqmm 4 core.

M&L for brackets using GI tubing light grade, 40mm dia to suit dia of street light, 1.2 mtr long, molded in angular shape suitable for fixing of street light fixed along the pole with two nos iron clamps 40 x 3mm and necessary nuts , bolts and washers etc complete all as directed.

Supply and fixing new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LED 100 watt , Endura city liner NEO odering code No LHFAXU7DPN6J070 of Havells or equivalent Bajaj/ Philips/Wipro

M&L for crossarms in replacement , bracing, supports, clamps and brick plates, fabricated from staructural steel section including nut bolts washers including welding, bending , cold or hot drilling holes for bolts in any shape or size as indicated in drawings or as directed, including two coats of aluminium paint over a coat of red oxide all specified.

Supplying and fixed in replacement sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 12 way with 200 amps rated bus bar SPN double door complete all as specified and directed.

S&F in replacement MCB single pole 6 amps to 32 amps , C series complete all as specified and directed.

All as per Item Ser No 12 above but single pole and neutral 32 to 63 amps, C series complete all as specified and directed.

M&L for Providing PCC 1:3:6 type C:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation coping of poles etc.

Supply and fixed two single core PVC insulated cable with stranded copper conductor of size 1.5 sqmm fixed in and incl concealed non metalic PVC conduit including copper earth wire 1.5 sqmm complete as specified

Supply and fixing new generation energy saving IP 66 flood light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire complete all accessories ,connecting up with three core flexible copper conductor cable all as specified & directed with high power LED 200 watt , aerodynamically designed with better thermal management complete.

Supply & installation of Galvanized steel high mast lighting system of 15 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 08 nos 100 to 200w LED Lights

S&F in replacement Automatic Electromechanical street light timer switch complete in all respect consisting of time switch contactors Nos one No. toggle switch 3 Nos of appropriate cap and input and output terminals completely wired with a bakelite sheet with copper wires of suitable cap. Time switch and the unit should encased in weather proof MS sheet cabinet with lockable front and paint with one coat of anti corrosive solution one coat of red oxide primer and two coats of enameled paint (Synthetic) duly spray painted and provision for cable entry and attachment with the existing pedestal time lite Distribution board timelite 65A , 3 pole/230v Digital time switchTL065DBO make indo Asian or equivalant make of Havells/HPL all as specified and directed

S & F junctiion box poly corbonate with glass fibre reinforced , environment feindely, rrecycable, UV resistant , halogan and silicon free anti acid and anti corrosive IP 66/67 in accirdance of with IE rule internally ammbeded gasket, jubction box including 3 phase 415 volt alluminium bus bar and one No. MCB SP 6A 10KA to control the street light including necessary clams, nuts bolts to fix the junction box with poles all specified and directed.

M&L for road cutting excavation returning filling in ,spreading,well ramming in layers ,soiling with broken boudders/stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road premix,carpeting 25 mm thick using ready mix path mate material ,rolled & compacted for road potch repair work.

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 40mm bore with necessary clamps all as directed.

M&L for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 3.35 mtr deep below normal ground level) with top edge of the plate not less than 2.75 mtr below normal ground level connected to galvanised iron strip 32 x 6 mm as earthing lead. by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.5 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and comman salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the watering pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

Point wiring PVC insulated and PVC sheathed multistranded FRLS copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth incl.Provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified :-

One 5 pin socket outlet 5 Amps on independent board.

S&F switch piano flush type single pole one way 5 amps

S&F socket outlet 3 pin 5 amps flush type

M&L ceiling rose, surface bakelite 65x50mm two to three terminal Make:- SSK /Plaza/Royal Kinjal

Supply and fixing Exhaust fan full metal body AC single phase 230 Volts of size 300mm sweep with louvre and making hole in the wall /grounting bolts and plastering work all as specified and directed.

S & F Wall mounted Fan full metal body 450 mm sweep,230 Volt ,50 Hz , Haevy duty complete all as directed by Engr-in-charge Make - Orient/Usha/ Havells.

S & F Exhaust Fan full metal body 450 mm sweep,230 Volt ,50 Hz , Haevy duty complete all as directed by Engr-in-charge Make - Orient/Usha/ Havells.

S & F Air circulator (Wall mounted) Fan full metal body 750 mm sweep,230 Volt, 50 Hz, Haevy duty complete all as directed by Engr-in-charge Make - Orient/Usha/ Havells.

M&L for Point wiring PVC insulated and PVC sheathed multistranded copper conductor FRLS cable of size 2.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 2.5 Sqmm dia to common earth incl. Provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified :-

One light/fan/bell point controlled by one way switch complete all as specified

S&F earth enclosure with 2 pin earth plug socket complete with MCB SP 16/20 amp flush type single pole one way .

S&F 15 mm bore GI tubing medium grade with all fittings to walls and ceilings or laid in floors complete all as specified.

S&F 15mm bore, stop cock, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F 15mm bore bib tap cast copper alloywith crutch/buterfly handle screwed for iron pipe complete all as specified. Make - Prayag/Polytuff.

S&F 15mm size PVC connection with PTMT nuts of length 600 mm. Make : Prayag/Pearl/ Parryware

Supply & Fix 25 Litre storage water Geyser working with 8 bar pressure vertically mounted with 5 years warrenty of tank and 2 year warrenty of heating element of make Crompton/Bajaj/ Jaquar/RACOLD

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4).

M&L cement concrete (1:4:8) type D-2 (40 mm graded crushed stone aggregate) as in sub base Mass Concrete.

M&L PCC (1:3:6) Type C1 using 20mm graded crushed stone aggregate as in Copping bed block hold fast complete all as specified and directed.

M&L Renedering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement.

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete

M&L Mild steel work framed such as grills,gratings etc. with ends of bars souldered or rivetted or forged into spikes,framed guard bars,frame works of water tanks and similar work conforming to Fe-410-0 or Fe-410-S.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2004) complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail& bottom rail, panelling of both side Prelam PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

S&F 100mm, Butt hinges extruded alumin alloy with galvanised mild steel hinge pin, anodised type B-21 .

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of size 150mm .

S&F aluminium, anodised handle cast type of size125 mm.

S&F 250mm long aluminium alloy.anodised, sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm.

M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane 3 mm thick.

M&L 15mm thick rendering or bedding layer of mortar (1:6) for laying floor finishes.

M&L 10mm thick Screed bed or bedding layer of mortar (1:4) for laying wall finishes.

M&L Glazed ceramic tiles (300× 450)× 7 mm thick (coloured) on vertical surfaces such as dado skirting and rise to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L non skid ceramic colour tiles matt finish 400x400x 7 to 8 mm thick in floors etc set and jointed in neat cement slurry and pointed in colour cement to match complete.

M&L 75 mm thick PCC (1:3:6) type C-2 using 40mm gradded crushed stone aggregate as in plinth protection surface fair and even complete all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil.

Add to (or deduct from) item No 01 above for every 3 cm or part thereof above or below 15 cm average depth

M&L for hard core of broken stone of gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M/L 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 3 coats of white wash on newly plastered surfaces of wall including preparation of new surfaces.

S&F steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floors of 15 mm dia of bore.

S&F steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floors of 20 mm dia of bore.

S & F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part - I

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of loose 20 mm (minimum weight 210 grams).

S&F water closet (squatting pattern) complete including provision of lime concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with P or S trap front or back inlet and foot rest any pattern excluding flushing cistern.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres.

S&F 15mm,bib taps, fancy type chromium plated,cast copper alloy, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule with flange of Make Parryware,EssEss, Prayag

S&F15mm, angle/stop cock, fancy type chromium plated,cast copper alloy, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule fixed.

S & F Gun metal stop valve with lever type handle suitable for 20mm dia of pipe complete.

S&F 15mm dia PVC connection with PTMT nuts of length 600 mm.

Concrete bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete: -

Salt glazed stoneware drain pipes, grade ‘A’, laid in trenches and jointed as specified complete of 150mm bore

Supply only integral water proofing compound ISI mark

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including removal of existing damaged covers complete. (Note : steel reinforcement shall be measured and paid separately under relevant items herein before)

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S.

-Ditto- all as per item No 77 above but 8 mm dia and over upto and incl 10 mm dia as in stirrups complete all as specified and directed

PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, trenches etc fixed in repair complete of following bore:-

75mm bore.

110mm bore.

PVC (SWR) bends fixed with access door fixed in repairs complete of following bore:-

75mm bore.

110mm bore.

PVC (SWR) vent cowl, fixed in repairs, complete of following bore:-

110mm bore.

M&L PVC (SWR)floor trap plain with grating including jointing wth solvent cement, dia of out let 75mm.

Excavating in post holes (or similar holes) each nexc 0.5cum, getting out, returning, filling in and ramming with earth around in layers nexc 25cm, watering and removing surplus soil to a distance nexc 50 m and making good surface of hard/ dense soil complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in embedding of precast post complete all as specified and directed.

M&L Rolled section as in Rafter purlin strut truss etc using MS angle FI or hollow square section etc including cutting welding nut bolt etc complete.

M&L MS Nut Bolt washer with Hexagonal head of dia more than 10mm and length as directed complere.

S&F Pre painted galvalume aluminum zinc coating GI bassed corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpas in Roof covering fixed with self Tapping screw complete.

S&F MS flat iron as in Wind tie including cutting drilling hole etc complete.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces.

S & F Machine pressed precast concrete interlocking paver block any shape and size conf to IS 15658-2006 of 60mm thick using rubber mould casting with glossy finish with Grey cement and pigment M-35 grade of concrete conplete.

Excavation in trenches nexc 1.50 mtr wide and n exc 1.50 mtr depth for foundation etc nexc 10Sqm on plan and getting out in hard/dense soil complete all as specified & directed.

Excavation over area n.exc 1.50 mtr depth and getting out hard/dense soil complete all as specified & directed.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers nexc 25cm thick in any type of soil complete all as specified and directed

Removing excavated material nexc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and directed

M&L 100 mm PCC (1:4:8) type D-2 using (40 mm graded stone aggregate) in subbase of floors, paving etc complete all as specified and directed. .

M&L rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound (to be measured & paid separately as supply only) complete all as specified.

S&F non skid joint free coloured ceramic tiles 7 nto 8 mm thick (Square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.38 sqm in floor set and jointed in neat cement slurry and pointed in colour cement complete.

M&L Granite tile 20 mm thick machine cut bedded and jointed with grey cement and pigment over wall/floor surfaces over screedbed with cement slurry complete all as spd and directed.

S&F stainless steel work in writing letters of any pattern, section and size of Grade-304 with and including stainless steel nut bolt/ screw complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundation, rafts,footing, plinth beam, base for columns complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in columns complete all as specified and directed. (Note : Necessary steel roof and form work shall be measured and paid separately)

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces

Formwork to sides of pillars, piers, columns, square, rectangular, polygonal, circular on plan rough finished surfaces of concrete completed all as specified and directed

M&L Rendering 10mm thick in CM 1:4 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete of FE 290 Gde E-165 complete all as specified and directed.

S & F rolled mild steel in framing for cladding, glazing, framing work or similar work including necessary cutting, drilling, welding etc fixed with angle cleats and connecting plates, confirming to Fe 290 (Gde E-165) completed all as specified.

S &F welded steel wire fabric and fixed complete to steel members weight exceeding 4Kg/Sqm

M & L for preparation of new previously untreated steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L Moorum/red bajri filling in floors or pavings , laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.

M&L for RCC hume class NP-3 600mm dia laid and jointed all as specified and directed.

M & L for cement concrete type E2 1:5:10 using 40 mm graded aggregate in sub base complete all as specified and as directed.

M&L forming construction joint 30 mm deep X 10 mm wide filled with sealing compound grade 'A' for 100 mm thick concrete slab

Schedule of credit amount of Rs. __-___ to be deducted during AOC

shri krishna traders

M/S JAINENDRA KUMAR JAIN

Goodluck Enterprises