Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹1.0 Cr+₹7.9 L (8.29%)Rejected-Finance A 91 DEFENCE COLONY AGRA CANTT AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being higher bidder |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Agra
HQ CWE(AF) Agra PIN-282008
PROVN OF TWO TEMPORARY BLDG FOR LIVING IN ACCN AT AF STN SONEGAON
2023_MES_578512_1
80022-19/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) (AF) Sonegaon Nagpur
As per tender documents
8 documents required · 8 mandatory
₹1,000
AGE (I) (AF) Sonegaon, Nagpur
₹1.8 L
Yes
28 Apr 2023
1 Feb 2023
20 Mar 2023
1 Feb 2023
13 Mar 2023
22 Feb 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and gettingout soft loose soil complete all as specified and directed.
Excavating over areas, n exc1.5 m deep and getting out soft/loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in soft/Loose Soil complete all as specified and directed.
M &L for Plain cement concrete in foundation filling type D-2 1:4:8 (40mm graded aggregate) and mass concrete complete all as specified and directed.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Removing excavating materials and depositing here directed exc 250 Mtr and not exc. 500 mtr distance and depositing where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.
M&L for Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 150mm thick for PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in Sub base of floor complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15mm thick in CM (1:6) for laying in floor finishes complete all as specified and directed.
M&L for laying coloured non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for laying coloured non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 for backing of Dado/ Skirting finished even and fair complete all as specified and directed..
M & L for laying coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instructions (WPC shall be measured separately) complete all as specified and directed.
Supply only integral water proofing compound
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 to be finished even smooth with out using extra cement as complete all as specified and directed.
M & L for prepariation of newly plastered surfaces of walls by brooming down or by steel wire brushing and applying three coats of white wash complete all as specified and directed.
M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed..
M&L for two coat oil bound distemper over one coat of priming chalk whiting on new plastered surfaces preparatory to distemper incl preparation of wall surfaces including 3 mm thick wall care putty on wall surface complete all as specified and directed.
M & L rough finished surfaces of concrete Formwork flat to sides of concrete foundations, footing , bases of columns, raft and raft beams , sides and soffits if any of foundation and plinth beams and similar work complete all as specified and directed.
M & L rough finished surfaces of concrete flat form work flat to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed.
M & L rough finished surfaces of concrete form work square or rectangular to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed.
M&L for RCC M-25 design mix (20mm graded aggregate) in fdn and footing & plinth beam complete all as specified and directed..
M&L for RCC M-25 design mix (20mm graded aggregate) in lintels beam, over 1.5m clear span and other similar bands, etc complete all as specified and directed..
M&L for RCC M-25 design mix (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.
S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips ( Confirming to Grade Fe-415D) Fe-500 or Fe-550 as in steel reinforcement complete all as specified and directed.
All as item No 29 but 5mm dia and over up to and including 10mm dia in stirrups.
S & F rolled mild steel roof trusses (framed), trussed purlins, rails including hollow square/rectangular hollow section for column etc. fastenings and heavy bracket framing, confirming to Fe 410 - W (Gde E 250) quality A including distance pieces, cleats, etc., complete all as specified and directed.
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) quality A complete all as specified and directed.
S &F mild steel screw bolt, (20mm dia bolt) machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut exc 10cm and n exc15cm long complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washer complete all as specified and directed and as per manufacturers instruction.
M &L for 75mm thick cement concrete 1:3:6 typeC-2 (using 40mm graded stone aggregate) as in plinth protection cement concrete surfaces finished even and fair w/o using extra cement complete all as specified and directed.
S&F Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete, and including treating with tar on steel surfaces in embeded in masonury work as specified and directed. NOTE :- Filling hallow of frame with PCC shall be measured and paid separately under respective item of BOQ
M/L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass or Gauze incl 300 mm rat rail rod pattern spring incl roller plate etc and all as specified in SSRpart-I sec 8, clause 8.24 (a) and fitted to chowkhat complete all as specified and directed.
M&L applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface complete all as specified and directed
S&F factory made steel window with side hung shutter including projecting type hinges with steel handle and steel peg stayhold fast etc complete with glazing bar dovetailed or welded complete all as specified and directed..
All as per item No 40 before but without glazing bars
M&L Steel ventilator with top hung shutter including hinges steel peg stay including treating with tar on steel surfaces in complete all as specified and directed.
S &F 3mm thick glass sheet ordinary quality & fixing with Oil putty in square n. exc 0.5 sqm in each panes complete all as specific & directed.
S&F Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples including necessary beadings complete all as specified and directed.
S & F mild steel medium weight cold rolled butt hinge 100mm size complete all as specified and directed.
S & F Aluminium Handle of 150mm size extruded aluminium alloy fabricated type anodised complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed (150mm long) bolt not less than 12 mm dia complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolts 300 mm with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts of extruded section or cast aluminium alloy and fixed sliding bolt not less than 16mm dia of bolt of extruded section complete all as specified and directed.
S&F MS frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening as specified in SSR PART-II complete all as specified and directed..
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheetys for top rail, lock rail & bottom rail for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gether with solvent cement, fix in frame as specified in SSR Part-II complete all as specified and directed.
S & F stainless steel butt hinge 100mm size complete all as specified and directed.
S & F Aluminium Handle of 150mm size cast type anodised complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed (125mm long) complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolts 200 mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts of extruded section or cast aluminium alloy and fixed sliding bolt not less than 16mm dia of bolt extruded section complete all as specified and directed.
Preparation to new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coat of Synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.
S & F cast iron nahani trap with grating including joint to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia of outlet complete all as specified and directed.
S & F salt glazed stoneware gully traps, square or round mouthed, type 'P' of size 150x150 complete all as specified and directed.
S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe and waste pipe)including PVC waste pipe 1 m long complete all as specified and directed.
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum wt 60 gms) complete all as specified and directed.
M & L 20 mm thick granite for urinal partiton slab termanating about 40 cm above floor line, fixed to wall complete all as specified and directed .
S&F in vitrious china wash basin, white flat back type size 550x400mm including bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc. with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe 1.0 mtr long fitted complete all as specified and directed.
S & F Vitreous China Squatting pan orissa pattern of size 580x440 mm white with integral foot rest incl `P' or `S' trap, including connection to trap and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed.
S & F Vitreous china wash down water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints with health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook etc. complete all as specified and directed.
S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F 15mm dia stop valves fancy type, chromium plated complete complete all as specified and directed.
S & F PVC flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle, including bracket and 38mm dia flush pipe of polyethylene for low level cistern complete all as specified and as directed
S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 20 mm bore pipe complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 15 mm bore pipe complete all as specified and directed.
S&F 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed in pipe complete all as specified and directed.
S&F , 15mm bore, bib taps, fency type , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
S &F shelf of PTMT Fixed with and including CP Brass screw and wooden/plastic cleats minimum weight 300 gram complete all as specified and directed.
S&F 15 mm dia pillar taps, fency type with capstan heads chromium plated secrewed down, high pressure with or without lettered "Hot or Cold with long sereuled shanks and fly nuts sereuled for iron pipe and fixed complete all as specified and directed.
S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of lenth 450 mm complete all as specified and directed.
S & F aluminium anodised tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and directed..
S & F harrison rails, 20 mm dia aluminium alloy anodised curtain rails with bracket and knobs fittings complete all as complete all as specified and directed..
S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank 3 layered (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball brass valves high pressure of polythene float and with epoxy coated aluminium rod screwed for iron pipe and fixed to iron pipe complete all as specified and directed.
M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete all as specified and directed.
M&L PVC (SWR) bend any radius 75mm dia complete all as specified and directed.
M&L PVC (SWR) junction single ,(single T) eqal or unequal 75mm dia complete all as specified and directed.
M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall incl fixing clamp complete all as specified and directed.
M&L PVC (SWR) bend any radius 110mm dia complete all as specified and directed.
M&L PVC(SWR) Tee any radius 110mm dia complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40 mm graded stone agg) for concrete bed to drain pipes including, packing under and haunding against the sides of pipe, after they tested for 150 mm dia pipe complete all as specified and directed.
S&F in for shower rose brass chromium plated with or without swivel joints 125 mm dia complete all as specified and directed
Supply and fix soap dish, vitreous china white aproximate size 160x160x90mm complete all as specified and directed
S & F Grating doom 100 mm dia PTMT (minimum weight 40 grm) complete all as specified and directed
Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil returning filling and ramming earth or broken rubble mixed with earth around in layes removing surplus soil and making good complete all as specified and directed.
M & L for plain cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410-W(Gde-E-250 quality A complete all as specified and directed.
S&F 3- 4 mm thick ACP (Aluminium Composite panel) fixed to wall cladding with suitable fixing arrangements complete all as specified and directed..
S&F Gypsum ceiling board for ceiling prepainted , perforated finish 600x600x9 mm thick in size of approved brand/make , laid over and including grid work of size 605x605 mm , made out of 0.50 mm thick GI tee 32x24 mm for main, 25x24 mm for cross tee and 24x24 mm angle fixed on wall , powder coated finish on expossed faces of tee and angle, hung from ceiling using 2 mm dia GI suspension wires fixed with adjustable clip spaced at 1200mm on main runners including making niches for fans/light complete all as specified and directed.
M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base.
M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block 60mm thickness, M-35 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 over sand cushining complete all as specified and directed. Note : The sand shall be measured and paid separately.
M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M & L for plain cement concrete TypeC-2, 1:3:6(using 40 mm graded stone aggregate) in surface channels and drains.
M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface chanel complete all as specified and directed.
M & L for brick work with sub-class `B' bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.
M&L for 15mm thick rendering CM 1:4 on fair faces of brick work
M & L for plain cement concrete Type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in as in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and use of form work.
M & L for plain cement concrete Type C-2, 1:3:6(using 40 mm graded stone aggregate) in fdn and mass concrete or concrete bed.
M & L for brick work with fly ash bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4.
M&L for 15mm thick rendering CM 1:4 on fair faces of brick work .
M & L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.
M & L for plain cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) cast in situ in as in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and use of form work.
M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface chanel complete all as specified and directed.
Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M & L 150mm dia (internal) reinforced cement concrtet pipe ,Class NP-2 laid and jointed complete with collars all as specified and directed.
M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore.
On site LDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users with UPFLOW FILTER INLCUDING MEDIA.
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 M dia X 3.0 M effective depth.
M &L for PVC concealed conduit point wiring with 1.5 square mm nominal cross sectional area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i draw in PVC conduit in concealed including 1100 volts grade 1.5 square mm copper stranded single core cable green color PVC insulatedfor contineuous earthing wire with complete chesscutting ,S/F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof all complete all as specified and directed.
(a) One light point controlled by one switch
(b) One ceiling fan controlled by one switch
(c) One Exhaust fan controlled by one switch
(d) One three pin 5 Amps switch socket outlet on independent board
M &L for PVC concealed conduit point wiring with 2.5 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 2.5 sqmm multistranded copper cable green colour for earth continuity conductor complete .
S&F switch piano, flush type single pole one way,5 Amps, 240 Volts AC complete all as specified and directed.
S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.
S&F switch socket combination 3 Pin,5 Amps,240 Volts, flush type complete all as specified and directed.
S&F switch socket combination 2 IN 1, 3 PIN,5 and 15 flush type universal ,240 Volts, complete all as specified and directed.
Supply and fix Bracket holder surface mounted, PVC/Polycarbonate type with back plate suitable for LED fitting 9 watt fixing with appropriate size screws / gutties for batten fittings complete all as specified and directed.
Supply and fix LED light 9W lamp suitable for LED fittings, connectors block etc. Make- Syska Cat No- SSK-SRL-9W or equivalent in CG/Havells/Bajaj/Philips complete all as specified and directed.
Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable. Make CG Cat No-CCS-100-20-65-HL2-DP-NWH/Havells/philips/Bajaj complete all as specified and directed.
S & F 35 Watt LED Bldg security light with a nominal system. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour temperature (CCT>5000K) and a CRI>70. The luminaire shall meet IP66 rating with THD<20% & pf>0.9. The luminaire housing should be made of pressure die cast aluminimum. The total power consumption should not exceed 25W (including driver) pre wired fitted on and including GI pipe bracket of suitable l size and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size and testing complete including LED lamp, complete all as specified and as directed. Make : CG CAT No.LST-20-CDL-M or equivalent in , Wipro, Bajaj, Philips.
Supply and fix wall mounted LED study light fittings capacity 3 watt fixed on wall with all accessories Make - Glitz Cat Part No. - 002/WH/3W/WW or equivalent in Bajaj/Philips/CG/Havells/Orient complete all as specified and directed.
S & F Fan regulator stepped type electronic fan regulator flush type on the phenolic laminated sheet. Complete all as specified and directed.
S & Lay concealed sub main wiring with two single core cable of 6 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) including earthing wire of pvc insulated stranded 6 sq mm cable ,chess cutting including PVC conduit not less than 20 mm with elbow,bends,couplers,tee, sunken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and makig good of distrubed surfaces and match with existing shade of wall/roof all as directed by Enginner -in -charge.
S&F sheet metal enclosure SPN DB 6 way 240 Volt with Bus bar semi conceled type with necessary connection. Make -: Havells Cat Part No. DHDMSHODDW06 or equivalent in Legrand,L&T,Indoasian. Complete all as specified and directed.
S&F sheet metal enclosure SPN DB 12 way 240 Volt with Bus bar semi conceled type with necessary connection. Complete all as specified and directed.
S&F MCBs SP 6 Amp with necessary connection in DB box. Complete all as specified and directed.
S&F MCBs SP 16 Amp with necessary connection in DB box. Complete all as specified and directed.
S&F MCBs SPN 10 Amp with necessary connection in DB box Make -: Havells Cat Part No. DHMGCSNF006-032 or equivalent in L&T, Legrand, Anchor etc.Complete all as specified and directed.
S&F MCBs SPN 32 Amp with necessary connection in DB box. Complete all as specified and directed.
S & F Exhaust fan, steel body AC single phase 230V of size 300 mm sweep with blades, frame and louvers. Make -CG/ALMONARD/BAJAJ. Complete all as specified and directed.
S & F Ceiling fans, complete with three blade, down rod, accessories 230 V 1200 mm sweep, electric efficient including necessary electric connection. Complete all as specified and directed.
Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No. 3 MES Schedule Part 1, with & including ; PCC 1:3:6 B1 reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete. (Note :- GI earth wire with GI pipe protection beyond 7.5 metre measured & paid separately)
GI earth lead wire of size 4.0 mm dia as earth continuity conductor as main earthing lead fixed to wall on batten or recessess as chases or burried in ground or drawn in pipe fixed to pole or any other indicated situation complete all as specified & directed
Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).(Steel body) complete all as specified and directed.
S&F MS fabricated brackets for desert cooler, Fe-410- W(Gde-E-250) quality-B framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S&F, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15 mm bore complete all as specified and directed
S&F 25 mm bore steel water tubes, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F 40 mm bore steel water tubes, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Gun metal globe valve, with iron wheel hand, screwed both ends for iron pipe for 40 mm bore of pipe complete all as specified and directed
S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed
M & L for fine dry sand cushioning to under ground electric cable including spreading and leveling and handpunning complete all as specified and directed.
Supplying & laying of bricks old pattern class 'B' for cable protection complete all as specified and directed.
Supplying & laying GI Tubing 40 mm dia Light grade pipe with connecting acessories complete in trench for road and on surface/,wall for protection complete all as specified and directed
Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth strip 32 x 6 mm connected to earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel with & including ; PCC 1:3:6 C1 pit with cover of RCC 1:1.5:3 A1 40 mm thick reinforced with 3 Nos, 6 mm dia bars both way, watering arrangements with 20 mm GI medium grade pipe ISI marked, GI funnel with GI mesh, filling with mixture of common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete as shown in electric plate No 3 of SSR Pt-I. (Note :- GI earth strip & protection pipe with GI pipe protection beyond test point (7.5 RM) shall be measured & paid separately)
GI strip of size 32 x 6 mm as earth continuity conductor as main earthing lead fixed to wall on batten or recessess as chases or burried in ground or drawn in pipe fixed to pole or any other indicated situation complete all as specified & directed
Supplying, laying, testing and Commissioning 25 Sqmm 3.5 core XLPE cable insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles complete all as specified and directed.
Supplying, laying, testing and Commissioning 16 Sqmm 2 core XLPE cable insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles complete all as specified and directed.
Supplying, laying, testing and Commissioning 6 Sqmm 2 core XLPE cable insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles complete all as specified and directed.
Taking down and refixing of old Steel tubular poles any type/size complete including pcc bedding ,filling & copping and Fixing of pole complete all as specified & directed. Note- Excavation , returning filling & removing shall be measured and paid separately.
S & F bus bar chamber made out of MS Sheet of thickness 3 mm fixed on angle iron frame (size 35 x 35 x 5 mm) grouted in PCC with aluminium bus bar 100 Amp rating duly colour coated mounted on porcelain insulator suitable for 3 phase 4 wire 415 Volt including one no. of MCCB 4 Pole 40 Amp 16 KA as incomer, including necessary cable connection, locking arrangements, earth terminals and cable glands etc. all as specified and directed
M/s Shrangi Rishi Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .