Urgent Special Repair Maintenance work of interior portion of Chamber and toilet of District Register

Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.

(a)Applying2 coats of bonding agent with synthetic multi functional rubber emulsionhaving adhesiveand water proofingpropertiesbymixingwithwater inproportion(1bondingagent :4water: 6cement) asperManufacturer's specification [Cement to be supplied by the Department]

Labour for takingout doorandwindowframe includingshutter for repairor replacement of differentparts of the frame & refixing the same including mending good all damaes complete.(Concreteandbrickworkformendingdamagewillbe paid separately) (b) Above area 2.5 Sq.m

Woodwork in door andwindow frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exludingcostofconcrete,IronButtHingesandM.Sclamps.(The quantum should be correted upto three decimals). d) Sal : Local.

Supplying, fitting and fixing M.S.clamps for door and window frame made of flat bentbar,end bifurcated with necessary screws etc.by cement concrete (1:2:4)as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length

Iron butt hbinges of approved quality fitted and fixed with steel screws, with ISI mark. Viii) 100mm x 75mm x 3.50mm.

Iron socket bolt of approved quality fitted and fixed complete c) 150mm long x 10mm dia bolt

Iron skeleton bolt of approved quality fitted and fixed complete. b) 450mm long x 10 mm dia rod.

AnodisedaluminiumAldrop / Slidingbolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fittedand fixed complete (i) 250mm x 16 mm dia bolt.

Supplying bubble free float glass of approved make and brand conforming to IS:2835-1987. (xiii) 12mm thick cleared toughened glass conforming to IS:2553-1992 (Part-II)

Plaster (towall, floor, ceilingetc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface (i) With 1:6 cement mortar (b) 20 mm thick plaster. In ground floor

a) Cleaning the walls and ceiling by scraping,m sand papedring and smoothening down the surface including putting.

Rendering the Surface of walls and ceiling with WhiteCement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer'sspecificationand as per direction of the EIC. (In Ground Floor) a) One Coat (i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality

b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

a) Priming one coat on tell or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc on the surface, if necessary a) On timber or plastered surface : With super gloss (hi-gloss) iv) Two coats (with any shade except white)

b) On steel or other metal surface :With super gloss (hi-gloss)- iv) Two coats (with any shade except white)

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. Specification (I.S. 230/72) fitted and fixed complete a) With continuous plate base (Hexagonal/Round rod) ii) 100mm grip x 10 mm dia rod

Door stopper (Brass)

Dismantling artificial stone flooring upto 50mm thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75m. A) In ground floor including roof.

Supplying and laying true to line and level Anti-Skid,FullBody, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006&IS4457-2007 and testing shall be made in accordance with IS:13630[Non-modularsizesfor tileswithSkid resistance>0.5,Mohr's hardness>5.0, Staining resistance: Class- ,WaterAbsorption:E<0.5%],MOR>35N/sq.mm in Internalareaof building e.g.ToiletBlock, Passage,Corridor,Accessible OpenTerraceetc.set in20mms and cement mortar(1:4) and 2mm thick cement slurryat back side of [email protected]./Sqmorusing Polymerised Adhesive(6mmthick layer applied directly over finished artificials tone floor/Mosaic etc without any backingcourse) laidafterapplicationslurryusing1.75KgofcementperSqm belowmortaronly, jointsgroutedwithadmixtureofwhitecementandcolouring pigmenttomatchwithcolouroftiles/epoxygroutmaterialsofapprovedmakeas directedandremovalofwaxcoatingof topsurfaceof tileswithwarmwaterand polishingthetilesusingsoftanddryclothuptomirrorfinishcompleteincluding thecostofmaterials,labourandallotherincidentalchargescompletetruetothemanufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). a) In Ground Floor: Sizes-300mmx300mmx10mm with breaking strength> 1200 N

Removal of rubbish,earth etc. from theworking site and disposal of the same beyond the compound, in conformity with theMunicipal / CorporationRulesforsuchdisposal, loading into truckandcleaning the site inall respect asper direction of Engineer in charge

Add : GST @18% (tweleve percent) on Rs.408912.00 i.e. Total Amount over item No. 1 to 22.

Add : Labour Welfare Cess @ 1 % (one percent) on Rs.482516.00 i.e. Total amount after GST