WELCOME MAINTENANCE AND REPAIR PLUMBING, SANITARY FITTING, JOINERY, SUNKEN TREATMENT FOR OMQS IN DOMESTIC AREA AT AF STN CHANDIGARH

Amount

M&L plain cement concrete (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, mud stops, benching, padding and like including water proofing compound as per manufacturers instruction complete all as specified and directed. Note:- Supply only of water proofing compound shall be measured and paid separately.

M&L plain cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating mixed with water proofing compound as per manufacturers instruction upto and including four storey bldg height/ 12.8mtr height complete all as specified and directed. Note:- Supply only of water proofing compound shall be measured and paid separately.

M&L PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregates and mixed integral water proofing compound as per manufacturer’s instructions as in padding concrete to sunken floor, coving/ gola to junction of the floor and walls including chamfering on edges complete all as specified and directed. Note:- Supply only waterproofing compound shall be measured and paid separately.

M&L lime concrete (1:2) with 40mm graded brick aggregate as in foundation and mass concrete complete all as specified and directed.

M&L PCC (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in filling inside the pressed steel frame and for fixing of hold fasts complete all as specified and directed.

M&L RCC (1:1½:3) type A-1 using 20mm graded crusehd stone aggregate as in beams, chajjas, shelves, cantilevers, bressurmmers, lintels over 1.5m clear span complete all as specified and directed.

Supply only integral water proofing compound.

M&L brick work with sub class 'B' old size brick, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone or concrete surfaces of wall, floor or slab and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed water tubing and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. (Note:- Item applicable for insertion of hold fasts at new position only)

Use and waste, form work to sides & soffits of lintels, counter slabs, shelves & chajjas, etc. for rough finished flat surface complete all as specified and directed.

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each without taking off shutters from the frame and removing from site as in Schedule of credit complete all as specified and directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm but not exceeding 4.00 sqm each without taking off shutters from the frame and removing from site as in Schedule of credit complete all as specified and directed.

Taking down shutters of any description not exceeding 1.00sqm each and removing from site as in Schedule of credit complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00sqm each and removing from site as in Schedule of credit complete all as specified and directed.

S&F factory made flush shutters 35mm thick with block board core and plywood face panels commercial type on both faces complete all as specified and directed.

Supply and fixing in opening solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face complete all as specified and directed.

S&F plain fillets of second class hard wood; square, rectangular or triangular in section of sectional area exc. 6 & n. exc. 13 Sqcm, clean sawn, wrought finished and secured with screws complete all as specified and directed.

S&F butt hinges, extruded aluminum alloy, anodised with galvanised mild steel hinge pin, type C-21, 100mm size complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fix to wooden or PVC doors complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fix to wooden or PVC doors complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handle fabricated type, anodised, complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handle fabricated type, anodised, complete all as specified and directed.

S&F sliding door bolts 300mm long of extruded sections aluminum alloy, anodised with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy; dia of bolt not less than 12mm complete all as specified and directed.

S&F sliding door bolts 250mm long of extruded sections aluminum alloy, anodised with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy; dia of bolt not less than 12mm complete all as specified and directed.

S&F in repairs 300mm long ordinary rat tail rod pattern MS door springs including roller and roller plate complete all as specified and directed.

S&F in repair continuous (piano) hinges of mild steel, bright finish or electro galvanised, width of flap 30mm complete all as specified and directed.

S&F continuous (piano) hinges of mild steel, bright finish or electro galvanised, width of flap 30mm complete all as specified and directed.

S&F hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 40mm dia cupboard knobs of brass, polished, bright finished and fixed with nut, washers/ screws etc. complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobs of brass, polished, bright finished and fixed with nut, washers/ screws etc. complete all as specified and directed.

S&F magnet catcher suitable for kitchen cabinet/ cupboard with steel plate and stainless steel as required complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks or stainless steel wire staples or fixed to wooden frame with first class hard wood bead complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks or stainless steel wire staples or fixed to wooden frame with first class hard wood bead complete all as specified and directed.

S&F factory made pressed steel frames for doors with two rebates; size of frame 125mm x 60mm made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F factory made box type steel window with glazing bars dovetailed or welded with two Nos 150mm mild steel tower bolts and steel handle to each shutter and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184/2012 sheet 1/3 to 3/3.

S&F factory made box type steel window without glazing bars with two Nos 150mm mild steel tower bolts and steel handle to each shutter including flat iron 12mm x 3mm for securing wire mesh, dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No. CEAF/STD-185/2012 sheet 1/2 to 2/2.

S&F mild steel frame work such as grills, gratings etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings and similar work conforming to Fe-290 Grade E-165 quality, complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

M&L for welding in repairs exc. 2.5cm but n.exc 5cm in length and thickness of metal n. exc. 6mm complete all as specified and directed.

M&L mild steel work as in bands, straps, supports/ stays and clamps for rain water pipes and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for 50mm thick plaster of Paris (POP) cornices to junction of wall and ceiling, including preparation of surfaces to receive cornices and finishing the disturbed surfaces to match with similar specification as exists, design and pattern of cornices as directed by Engineer-in-Charge complete.

M&L 18mm/ 19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18mm wide 6mm thick beading of first class HW (Teak) all around fixed in repairs complete all as specified and directed.

Dismantling floor, hearth or wall tiling or paver blocks, chequered tiles etc. including cement mortar bedding and removing rubbish off the premises of MoD land complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection, laid to slope of (1:20) finished fair & even, with and including 10mm wide joints to full depth @ 2.5m c/c and at corners duly filled with mastic mortar complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7mm to 8mm thick (square or rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

S&F first quality glazed designer pattern coloured ceramic tiles of size 450mm x 350mm x 7mm or 450mm x 300mm x 7mm thick fixed in pattern to wall (combination of dark and light colour with border) laid on vertical surfaces as in skirting, dado etc. laid with neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat in cement plaster (1:3) complete all as specified and directed.

M&L for vitrified ceramic tiles 9 to 10mm thick (square/ rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors in light shade set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in skirting, dado etc. in dark shade/ double charged laid with neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat in cement plaster (1:3) complete all as specified and directed.

M&L for granite 20mm thick (table rubbed and polished) as in steps, window-cills, cooking platforms, cuonter-slabs and like, set in neat cement slurry @ 3Kg/Sqm laid over and including 15mm thick bedding layer/ backing coat in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting for counter WHB, moulding the corners/ edges and making holes for cooking gas pipe etc. complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surface of any description including raking out joints, hacking for key, scrubbing down with water and removal of rubbish outside MoD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on brick/ concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick plaster in cement mortar (1:4) on brick/ concrete surfaces of walls mixed with water proofing compound as per manufacturer’s instruction complete all as specified and directed. Note:- Supply only of water proofing compound shall be measured and paid separately.

M&L for rendering 10mm thick plaster in cement mortar (1:3) on brick/ concrete surfaces of fascia, facade, roof ceiling, chajja etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of walls including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and trading oil, greasy spots etc., washing, rubbing down and stopping of surfaces using sand paper and applying two coats of oil bond distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of first quality oil emulsion distemper over and including a coat of chalk whitening preparatory to distempering complete all as specified and directed.

M&L for preparation of old treated plastered/ unplastered surfaces of ceilings, including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of first quality oil bond distemper complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of ceiling and brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts, trading oil, greasy spots etc., washing, rubbing down and stopping of surfaces using sand paper and applying one coat of white wash complete all as specified and directed.

M&L for preparation of of old plastered/ unplastered surface of walls including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts, trading oil, greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying one coat of white wash complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified.

S&F sheet glass 4mm thick, ordinary quality glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F figured glass 4mm thick, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

M&L preparation of new wooden or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted wooden or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L draining out, cleaning and removing accumulated sludge/ dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity exc. 250 litre but n. exc. 500 litre, placed on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, and writing date of cleaning including removal of rubbish outside MoD land complete all as specified and directed.

M&L draining out, cleaning and removing accumulated sludge/ dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity exc. 500 litre but n. exc. 1000 litre, placed on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, and writing date of cleaning including removal of rubbish outside MoD land complete all as specified and directed.

S&F in repairs rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltr including inlet pipe, outlet pipe, drain pipe with plug and 20mm dia (PTMT high pressure wt 210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltr including inlet pipe, outlet pipe, drain pipe with plug and 20mm dia (PTMT high pressure wt 210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm bore and fixed (Minimum weight 142gms) complete all as specified and directed.

Supply and fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore and fixed (Minimum weight 210gms) complete all as specified and directed.

Supplying, laying and testing 15mm bore medium grade galvanised mild steel tubing with all fittings and fixed complete to wall and ceiling or laid under floor, including cutting existing steel tubing & screwing, if required for alterations and additions including taking up existing tubing complete all as specified and directed.

Supplying, laying and testing 20mm bore medium grade galvanised mild steel tubing with all fittings and fixed complete to wall and ceiling or laid under floor, including cutting existing steel tubing & screwing, if required for alterations and additions including taking up existing tubing complete all as specified and directed.

Supplying, laying and testing 25mm bore medium grade galvanised mild steel tubing with all fittings and fixed complete to wall and ceiling or laid under floor, including cutting existing steel tubing & screwing, if required for alterations and additions including taking up existing tubing complete all as specified and directed.

M&L cast iron floor trap 75mm dia of outlet with mild steel chromium plated grating, including jointing to waste pipe in PCC (1:2:4) type B-1 fixed in repairs complete all as specified and directed.

M&L cast iron floor trap 100mm dia of outlet with mild steel chromium plated grating, including jointing to waste pipe in PCC (1:2:4) type B-1 fixed in repairs complete all as specified and directed.

S&F 100mm bore cast iron bends, diminising pieces or tapers fixed in repairs complete all as specified and directed.

S&F 75mm bore cast iron bends, diminising pieces or tapers fixed in repairs complete all as specified and directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, with oval access door complete all as specified.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, with oval access door complete all as specified.

S&F 75mm bore cast iron sand cast soil, waste and vent pipes in any length with or without ears fixed to walls with cement joints with suitable clamps complete all as specified and directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipes in any length with or without ears fixed to walls with cement joints with suitable clamps complete all as specified and directed.

S&F in repair vitreous china half stall type urinal, white including providing fixing plugs, bedding against wall in cement mortar (1:2), securing urinal to plug with and including 60mm long brass screws, pointing around urinal back including supply & fixing PTMT waste coupling half or full threaded suitable for urinals complete all as specified and directed.

S&F in repair wash basins, vitreous china (flat back type) 550mm x 400mm in size, including cutting for and pinning in ends of brackets or erecting stand, fixing of supply and waste pipe, including PTMT waste coupling (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and directed.

S&F vitreous china counter top (self rimming) wash hand basin, white in colour of size 630mm x 500mm including circular cutting and tucked in granite slab including 15mmdia cast copper alloy chromium plated fancy type single lever basin mixer, 32mm dia brass CP waste fitting and connections to waste pipe and water pipe complete all as specified and directed. Make: Hindware, Model: RHAPSODY, Cat No. 10045 or equivalent in CERA.

S&F in repair vitreous chinaware wash down water closet squatting pan (Orissa pattern/ Indian type) of size 580mm x 440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) but including 100mm CI ‘P’/ ’S’ trap) set and jointed including embedding concrete complete all as specified and directed.

S&F in repair vitreous china wash down water closet EWC (pedestal pattern) white including fixing bolts, plastic seat and cover white with mild steel chromium plated or anodised hinging devices, connected to drain outlet complete all as specified and directed.

S&F in repairs plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level white flushing cistern valveless, symphonic action type with inlet, ball valve, float and handle including PVC flush pipe 32mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC complete all as specified and directed.

S&F in repair stop angle valve, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair bib taps long body (fancy type), cast copper alloy chromium plated with capstan head, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed with WHB and connection to iron pipe complete all as specified and directed.

S&F towel rail 600mm long (between flanges), 20mm dia 'D' type, chromium plated brass, fixed to walls with screws and plastic cleats complete all as specified and directed.

S&F in repairs 450mm long PVC connections with non corrosive PTMT nuts & washers on both ends suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs 600mm long PVC connections with non corrosive PTMT nuts & washers on both ends suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs stainless steel sinks with drainage board made out of 1.00mm thick sheet for kitchen fixed with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with and including PVC waste pipe and CP waste coupling 32mm dia including making good to disturbed surface complete all as specified.

S&F in repairs 125mm dia PTMT grating (Minimum weight 40 gms) with or without waste hole fixed on floor/ Nahani trap with cement mortar complete all as specified and directed.

S&F in repairs PTMT waste coupling suitable for 32mm bore discharge pipe & flexible pipe suitable for WHB/ Urinal complete all as specified and directed.

S&F in repairs PVC flexible waste pipe suitable for WHB/ Sink/ Urinal complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm dia with swivel joints including fixing to 15mm bore pipe complete all as specified and directed.

S&F in repairs stainless steel chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories complete all as specified and directed.

S&F in repairs chromium plated soap dish complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer with telephone shower arrangement 15mm bore for mixing hot or cold water screwed down for iron pipe for wall including connections to shower complete all as specified and directed.

S&F in repairs brass chromium plated mixer for mixing hot or cold water screwed down for iron pipe for WHB, including connections to WHB complete all as specified and directed.

S&F in repairs gun-metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore and fixed complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy chromium plated fancy type, screwed down, high pressure, with long shank and cup (concealed type), screwed both ends for 15mm bore iron pipe or for unions and fixed including cutting to wall tiles or brick work and making good the disturbed portion in cement mortar (1:3) complete all as specified and directed.

S&F in repairs drapery rod of stainless steel 25mm dia ribbed/ fancy type including brackets and finials as required complete all as specified and directed.

S&F drapery rod of stainless steel 25mm dia ribbed/ fancy type including brackets and finials as required complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F PVC (SWR) double socketed pipe 110mm dia in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw including making good mouth of rain water pipe in cement mortar (1:3) or PCC (1:2:4) complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F PTMT shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for including removing the rubbish outside MoD land complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position including separating, scraping and cleaning of reinforcement and removal of debris off the premises upto a distance not exceeding 50m complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc. including segregating and stacking serviceable bricks for re-use and removal of rubbish/ brick bats outside defence land complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in cement mortar, in floors, aprons etc. and removing rubbish outside MoD land complete all as specified and directed.

Dismantling of cast iron work of any description and any position complete all as specified and directed.

Baba Engineers and Contractors

M AND H BUILD TECH

KUMAR AND COMPANY

MOHAMMAD RASHID