ADDITION/ALTERNATION AND SPECIAL REPAIRS TO OTM ACCN OF 1 EME CENTRE, UNDER GE (NORTH) SECUNDERABAD

Amount

B/R ITEMS

M&L for dismantling asbestos cement (corrugated, semi corrugated etc.) sheet in roof covering/ fibre sheets etc complete all as specified and directed.

Dismantling of Single layer Mangalore pattern tiles in roofing all as specified and directed.

Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.

Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm and over in section in any position complete all as directed

Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

M&L for Second class hard-wood Clean sawn in scantlings in timber framed for rafter and purlin in roof etc complete all as specified and directed.

All as per item No-07 here-in-before but except material wood obtained from Dismantling of timber scantling complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain/ profile steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

S&F 2 mm fibre glass reinforced translucent corrugated sheeting of a similar pattern as that of PPGI sheet with two corrugations side lap fixed with coach screw, GI 'J' or 'L' hooks in roof including necessary scaffolding etc complete all as specified and directed.

M&L for 10 mm thick multiwall ( 2 walls) polycarbonate sheet weight not less than 1.70 kg per sqm fixed with connecting attachment and screws as directed.(including aluminium anodised connecting attachment for multiwall polycarbonate sheet with required screws etc), complete all as specified and directed.

Supply and installation turbine Air Ventilator with top plate, bottom ring with Stainless steel and fins of 0.5 mm thick aluminum, along with 1.8mm thick FRP trapezoidal hopper mounting base sheet with profile matching to AC sheet / PPGI sheet. Throat (neck) Dia 21" & ventilator Dia 28". Number of fins : 43 fins complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets or frame work.all as specified and directed

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and and as directed

S&F joist channel, angle or tee sections, fixed independently without connecting plates, etc., ( cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality A and including necessary precautionary measures as in supports etc complete all as specified and directed.

S&F Roof strusses (framed) and connecting plates, etc. ( cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality A : Note: The strusses have to be inserted in wall by replacing damaged existing rafters as in old madras terrace roof including necessary precautionary measures as in supports etc., as directed by the engr-in charge.

S&F Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment etc.Roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., as directed by the engr-in charge.

S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

S&F Mild steel bolts.purpose made.with hexagonal or forming holes, without any attachment dia of neck exc 20mm not exc 25mm all as specified and directed.

S&F 1mm thick plane galvanised , mild steel sheeting in ridges hips, valley gutters, drip etc welded or soldered joints with grade of zinc coating 275 ,and including neccessry arangement for leakage proof drop in to rain water pipes 160mm dia complete all all as specified and directed.

S&F 110 mm bore PVC rain water pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc complete all as specifed and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Material and labour for walling of squared rubble masonry regular coursed, Secunderabad and Bangalore types, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L for PCC 1:2:4 type B1 ( using 20mm graded stone aggregate) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-reinforcement ) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided reinforced (reinforcement of cut as required to facilasite demolition etc) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as in RCC bands supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed.

M&L for mild steel TMT bars 8 mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups , spacers and binders etc., including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed

M & L for rendering 15 mm thick in two coats, 10 mm thick in cement plaster 1:6 and 5 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Supply only integral water proofing compound.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar etc and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for 125mm thick cement concrete type B-2 1:2:4 using 40 mm graded stone aggregate in flooring finishes the surfaces even and smooth without using extra cement etc complete all as pecified and directed.

M&L for 40mm thick wear proof topping as specified (in corporating an approved metallic floor hardner) laid on concrete floors and pavement and finished even and smooth (except metallic hardner)complete all as specified and directed..

Supply only metallic floor harder.

M&L for forming 20mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A'. Thickness of concrete slab 150mm.complete all as specified and directed

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A'.complete all as specified and directed

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L for machine cut kota stone flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishing over screed bed of 15mm thick in cm 1:6 complete all as specified and as directed.

M&L for machine cut kota stone as in skirting / cills/dado 20-25mm thick over cement plaster of 10mm thick base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishign complete all as specified and as directed by Engr-In-Charge.

M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen platform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed

M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M/L for vitrified ceramic tilies 10 mm thick (square/rectangle) polished light shade, area of each tiles n.exc 0.36 sqm each in floors and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing of screed bed or bedding layer of cement mortar 15mm thick for laying floor finish in CM 1:6 complete all as specified and as directed

M/L for vitrified ceramic tilies 10 mm thick (square/rectangle) polished light shade, area of each tiles n.exc 0.36 sqm each in skirting and dados and jointed in neat cement slurry and pointed in white or coloured cement to match over and including for providing rendering 10mm thick on brick/concrete surface in CM 1:4 to receive tiles in skirting/dados complete all as specified and as directed

S & F Non skid ceramic coloured tiles 7 to 8 mm thick (joint free) area of each tile exc 0.11 but n exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, laid over screed bed or bedding layer of 15mm thick in C;M (1:6) complete, all as specified and directed.

S & F Non skid ceramic coloured tiles 7 to 8 mm thick (joint free) area of each tile exc 0.11 but n exc 0.18 sqm as in Skirting/Dado,set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm rendering to receive tiles in skirting/dado CM 1:4 complete all as specified and directed.

S & F glazed ceremic coloured tiles in vertical surface of size 450x300x7mm thick or of any size(concept type of any pattern ) set and jointed in neat cement slurry and pointed in clolured cement to match coloured tiles over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for designer rubber moulded chequered cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

Spreading and levelling of Sand/ grit cushioning below interlocking tiles.

M& L for 60mm thick Machine pressed precast paver block M-35 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (glossy finish) etc complete all as specified and as directed Note: Sand/ grit cushion will be measured separetely.

M&L for preparation of existing kota stone / cement stone slab flooring at any position and polishing with machine to surfaces in two steps (1st step with rough stone & 2 nd step with fine stone and pointing of joints to match the colour of kota including treating the surface with bees wax polish complete all as specified and as directed.

M&L reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as in slab supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc as in rough finished flat surfaces of concrete complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, completed all as specified and directed by Engr-in-Charge..

S&F standard aluminum sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directe Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only for 12mm thick Veneered decorative plywood,grade I (with BWR resin) decorative both side faces etc complete all as specified.

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast made in flat iron etc with one coat of primer complete all as specified and as directed

Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

S&F bands, steps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specifed and directed.

Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exc 0.5 sqm each etc completed all as specified and directed by Engr-in-Charge.

Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc .10Sqm each etc completed all as specified and directed by Engr-in-Charge.

Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embedded portion exc half brick & N.exc one brick etc completed all as specified and directed by Engr-in-Charge.

S & F 35mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as directed and specified.

S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed by Engr-in-Charge.

M&L 30mm thick 2nd class hard wood, glazed and skelton shutters for windows, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc ,sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (b) all as specified and as directed

Supply and fix in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed

S & F aluminium anodised sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads all as specified.

S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane and all as specified.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed

M&L 2nd class hard wood plain fillets of sectional area exc 6 & not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bull nosed,splayed,chamfered or rounded on one edge or face complete all as specified and as directed

M & L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on wood or wood based material over 10 cm width or girth complete all as specified and as directed

M & L preparation of old painted surfaces of wood and applying Two coat of synthetic enamel paint on wood or wood based material over 10 cm width or girth complete all as specified and as directed

M & L for preparing old/new surfaces of wood and wood based material of any description and girth not otherwise described and treated with one coat of creosote oil all as apecified and as directed.

M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L preparation of old painted surfaces of steel and applying Two coat of synthetic enamel paint on steel surfaces over 10 cm width or girth etc complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying Two coat of white wash all as specified and as directed.

M & L for preparing newly plasterd wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc complete all as specified and as directed.

M&L for complete removal of existing treatment on wall /ceiling surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick birla care wall putty etc all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over priming coat on walls etc all as specified and as directed.

M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying Two coat of cement base paint of any colour all as apecified and as directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each and refixing in the same opening including easing , adjusting and renewal of unserviceable screws etc complete all as specified and directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S & F 110mm bore UPVC(SWR) plain bends any radius complete all as specified and directed.

E/M ITEMS

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit concealed as per site requirment and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered suitable for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for:

(a) One light point/Bell point controlled by one, one way switch 5 amps, SP

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c ) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One light point controlled by two two way switches5 amps single pole

Description as per item No.106 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 5 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor

S & F switch piano single pole flush type 5 amps, 230 volts.

S & F switch socket combination flush type multipurpose 3 pin 5 amps 2 in 1 230 Volts all as specified.

S & F switch socket combination 2 in 1 multipurpose 5 pin 5/15 amps flush type complete all as specified.

S & F electronic ceiling fan regulator stepped type heavy duty suitable for BLDC motor complete all as specified.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round blocks all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S & F LED tube light fitting 20 Watts , 230 volts, box type, epoxy powder coaded with reflector cover channel, with electronic drive, bipin holders, connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed by Engineer-in-charge. Make : Havells cat No-REGALBATTENT8UPTO1X22W SSBSWH incl Tube Rod cat No-PHOTONULTRA2. 01213T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No - TMC501P1xT-LED22WP3241 incl tube rod 20w.

Supply and fix recess mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel with central opal diffuser series mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make - Havells Cat No - STARTO2X2PLR36WLED840MOD incl driver LED DRIVER36V36WS, Wipro Cat No - CRCO23R036HP65G3, Philips Cat No - RC383B LED36S-6500 PSU OD WH PIR.

S&F LED Light fitting 1x35 Watt complete with Bracket made out GI pipe med grade 25mm of L Shape 1.5 Mtr long incl clamps and nuts botls etc , all as specified and as directed by Engr-in-Charge. Make - Havells Cat No - ENDCITYLITPLATE+ SL35WLED757SASYBOPCWOSPD, Wipro Cat No LR13-501-XXX-57-XX, Philips Cat No - BRP030 LED35 CW MR PSU GR DX.

S & F LED bulb 9W (LEDZ LED Lamp CDL B22) Bajaj 830418 or equivalent in philips/Havells.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified.

S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.

S & F MCB SP 5 to 40 Amps 240 volts for fixing on MCB DB's all as specified.

Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 2.5 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 25mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I, 2009.

Supply and fix Mild steel rod for ceiling fans of 3 mtr long duly screwed threads with check nuts & pin for ceiling fan complete all as specified and as directed

S & F hangging hooks for fixing the fans.

Supply and fixing ceiling fans 1200mm, aluminium body, power consumption not more than 30W, BEE 5 star rated with BLDC motor, TDH<=105, service value greater than 8.45, air deliver minimum 220 CMM, 350 RPM (Tolerance as per IS : 374-2019) compatible to elecronic step type regulator unit for speed control, down rods complete all as specified and directed.

Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including taking down old unserviciable Exhaust fan & depositing to MES store yard & all as specified and directed.

S & F GI Tubes of size 40mm, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S & F Vertical type TPN DB 4 way double door with incoming MCCB FP 415 volts AC 3 phase 50 Hz, 16KA breaking capacity with fized magnetic setting for current ranging of capacity 100 Amps confirming to IS-13947 (P-2) IEC:947 made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof having hinged and robust locking arrangement duly powder coated complete all as specified and directed. Make : Havells-Cat Part No VTPN_DHDLVDRWGOF O04 & MCCB Cat No - IHLGHF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCCB100DD041P43S & MCCB Cat No - CSC3S4100.

S & F Vertical type TPN DB 4 way double door with incoming MCCB FP 415 volts AC 3 phase 50 Hz, 36KA breaking capacity with fized magnetic setting for current ranging of capacity 200 Amps confirming to IS-13947 (P-2) IEC:947 made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof having hinged and robust locking arrangement duly powder coated complete all as specified and directed.

S & F MCB SP 40 Amps 240 volts, 10KA having C Curve all as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 3 poles and current carrying capacity 63 Amps in the DB complete with connection testing and commissioning.

Supply and Laying LT UG cable of size 4 core x 25 sqmm in trenches /floors/on wall /service connections XLPE insulated, PVC sheathed and armoured 1100 volts grade with aluminium conductor complete all as specified and directed. Make : Havells/Polycab/Finolex

Supply and Laying LT UG cable of size 2 core x 16 sqmm in trenches /floors/on wall /service connections XLPE insulated, PVC sheathed and armoured 1100 volts grade with aluminium conductor complete all as specified and directed. Make : Havells/Polycab/Finolex

Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard /dense soil for laying /taking out of LT UG cable complete all as specified and directed.

Returning , filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point.

Supply and lay unrestricted pre cast concrete cable covers class LV type-2, flat, size 250mm x 150mm x 40mm.

Supply, spread and filling approved sand in cable trenches for cushioning of LT UG cable complete all as specified.

Supply & lay G I tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed of size 50 mm dia bore.

Taking down existing old vintage ceiling/exhaust fans and depositing to MES store yard as per directed by Engr in Charge.

Supply and fix energy saving, environment friendly & robust IP65 [ Dust penetration-protected, jet-proof] 70 Watt LED low bay light with PDC housing for ceiling suspended with wide beam optics, Initial luminous flux (system flux) 10000 lm, Initial LED luminaire efficacy 150 lm/W, Surge Protection (Common/Differential) Luminaire surge protection level until 4 kV differential mode and 4 kV common mode all as specified and as directed. Make - Philips Cat No- BY515P LED100S 5700 WB PSU GR, Havells Cat No BAYBRITEFLAREHB70W LE 857PWBBOLTG or equivalent in Bajaj.

S&F air circulator fans oscilating type complete accessories, 600mm sweep, with regulator connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to fan all as directed. Make : Almonard HSN Code 84145910 or equivalent

Supply and fix in replacement single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with single pole MCB 32 Amps 240 volts complete all as specified and as directed.

Mavee Syndicate

M/s R.L.PAREEK

Shree Construction Co.

Sai construction & services

R. Wadhumal and Sons

B.N.S Constructions

STANDARD AGENCIES