Construction of office Building (RCC-B Plus G Plus 3) of Assam State Election Commission at Panjabari Road, Guwahati

Amount

Earth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Upto a depth of 2 mts. below the existing Ground Level In ordinary Soil

(B) Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (b) Above 1.5 m upto 3.00 m depth

Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary. (a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only

Earth work in excavation in slushy/ marshy soil, decomposed organic matter mixed with brickbats, broken glass panes, broken earthen pots etc. removal of stumps and other deleterious matter in the proposed building site including constant water pumping for bailing out water as directed including return filling and ramming after completion of work with good quality earth (measurement will be on the basis of profile or section measurement).

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1) C) UNIFORM PILE (II) Concrete Grade M25 v) Pile dia 500 mm

Extra for using admixture & plasticiser. (b) RCC grade M25 vi) Pile Dia 500 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement. (v) 500 mm dia

Empty boring for specified diameter piles from ground level to cut-off level. f) Pile Dia 500 mm

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling.

Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately) (a)In proportion- 1 cement : 3 sand : 6 coarse aggregates by volume

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine ( i ) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. c) M25 grade concrete

( ii) In super structure from plinth level up to 1st floor level. Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. II. Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concrete Pump P) Using admixture, plasticiser etc c) M25 grade concrete

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level to 2nd floor level

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 2nd floor level to 3rd floor level

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 3rd floor level to 4th floor level

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work: In Substructure upto Plinth Level : Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. Using 25mm thick plank

Sides of tie beams, plinth beams, grade beams etc. at or below plinth level Using 25mm thick plank

In Superstructure from Plinth Level upto Floor Level-1: Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Extra for each subsequent floor or part thereof above the First Floor level to 2nd floor level as mentioned in item no. 3.2.1 .

Extra for each subsequent floor or part thereof above the 2nd Floor level to 3rd floor level as mentioned in item no. 3.2.1 .

Extra for each subsequent floor or part thereof above the 3rd floor level to4th floor level as mentioned in item no. 3.2.1 .

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B wall

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

B) On fair side b) In cement mortar 1:4

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick) b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster 1st to 2nd floor

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster 2nd to 3rd floor

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster 3rd floor to 4th floor

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. b) On two coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. b) On two coat plaster

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (i) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Extra over item 18.1.1(a) for each subsequent floor or part thereof 1st floor to 2nd floor level.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (I) Thickness = 1.5 mm

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (ii) 4-Panel with 5mm clear float glass

Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. a) Single leaf Side hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash. With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. (d) Single leaf Top hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) c) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 1200mmx600mm and above

Providing polished Multiwyn/ DEVI tiles of approved quality, size, shape of specified thickness on pavers over a base course including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (A) MULTIWYN Tiles (Pavers) Patella, West wind, Harringbone, Flexi, Super

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. VITRIFIED TILES iii)Executive range-2 (Sizes 600 mm x600mm and above) i) Nitco made/Quotone/Somany

Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range Somany/ Orient/Nitco/Varmora Make iv) Of size 300mmx600mm and above

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). b) Tower bolts i) 300mm x 10mm

c) Door handles iii) 150mm

n) Mortice lock vertical type ii) 75mm

v) Door stopper with rubber stopper

Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department. A) Godrej c) Heavy Duty Door Closer( size 180 mm x 65mm x 64mm)

Providing,fitting and fixing Floor Spring of various weight & type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department B) Godrej a) Fire rated floor spring B 803( size 307mm x 109mm x 40mm)- 80 kg door/ B 804( size 307mm x 109mm x 40mm)-100 kg door (Godrej make)

Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131of BASF mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131of BASF @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131of BASF mixed with cement in the ratio 1:2 as final coat. (A) Using Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)

(A) Providing and applying over roof slab/ raft slab, polymer modified bituminous waterproofing membrane Proofex SM of Fosroc chemicals on an unprimed substrate using specially designed spray application equipment to be applied in a single coat, using wet on wet passes to give a nominal dry film thickness of 2mm followed by applying ProofexGeo Textile having weight of 200gm per sq.m immediately after the application of Proofex SM membrane when the surface is still wet but not tacky and as specified and directed by the Department.

(B) Providing and application of Sonosheild HLM 5000 of BASF India Ltd, the Liquid, cold-applied elastomeric Asphalt modified Polyurethane waterproofing membrane system of 1.2mm thick having average elongation of 600% and average tensile strength of 1 MPA. The product shall conform ASTM C 836 & National standard of Canada 37.58 - M86 developed by CGSB.

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.) a) from Private land

Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (b)Using Grading II material

(c)Using Grading III material

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 40 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard. False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary). (ii)12.5mm MRB

Providing and fixing Stainless steel (Grade 304 ) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories 7 stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of the waist slab with suitable arrangement as per approved or Engineer in-charge. (For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. a) In beams and joists with connecting plates/ angled cleat.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Spectrum or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Spectrum or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii)300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing , fabrication and fixing of structural glazing made out of coloured Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural selicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary.

Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds (a) Regular i) 100 mm

Supplying,fitting and fixing of Automatic sliding door and operator, modular design including internal cover with operator dimensions (H X T) not exceeding 120mm x 175mm and of length required to suit the opening size given below: Clear opening of size 2400mm X 2400mm: compact linear sliding door automatic, with self cleaning rollers, TUV type tested as per DIN 18650.The Automatic sliding door consists of 16 bit Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-teaching. Operating Modes: Continuous open, automatic operation, closing time, night lock, multi-sensor detector(radar motion detector with direction detecion and self-monitoring, double 3D safeguard light curtain (light barrier) for convenient safeguarding of the opening width) with Electro magnetic locking, integrated in the drive unit, with manual emergency unlocking of GODREJ/GEZE make.The operator will be provided with short circuit proof power supply unit 220 / 240 V, 50 / 60 hz . (d) door Automatic ST20 D

Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (D) Bottle Brush / Nil Gulmohar / Debadaru / Weeping Willow

Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda

Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (B) With Erica palm (Butterfly palm)/ Kentia palm (II) Using earthen pot of 60 cm dia.

Providing & fixing of Flotex Flocked Textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be anti-static with thickness of 4.3mm, and approx. weight of 1.8 kg/ sqm.of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sqm.in the width of 2mtr. The floor covering should have Fire test EN- 13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 class DS, Sanitized anti-microbial treatment, with resilient waterproof backing, anti-allergic which is certified by British allergy foundation, with ten year replacement guarantee complete in all levels as directed.

Providing fitting and fixing Armstrong make 12mmx75mm one side rounded edge wooden skirting as approved and directed.

Providing and fixing of Armstrong American Exotics Bruce range of products with 7 Ply construction of cross ply with sealed edges for superior spill resistance Engineered wood. The length of the range varies from 400mm to 1200 mm, width being 120mm and thickness 10.5mm to give a variety of dimensional choices. The veneer thickness of the products remains to be 2mm.The plank shall have a unique locking system- “Lock & Fold” system. To protect the plank from moisture the edges are waxed to give superior protection. The edge offers micro beveled shape with Permion finish in order to resist stains and spots. Top Solid Wood layer should not be less than 3mm complete in all levels as directed.

Supplying, Fixing and Fitting of not less than 50 mm thick wall panelling with 12 mm thk BWR grade Plywood of Greenply/Century make fixed over Gyp steel flanged studs fixed vertically on brick wall at interval of 450mm c/c. The 12 mm thick BWR grade Plywood of approved brand to be fixed on the face with 25mm drywall screw at 300 mm c/c to one sides of 50 mm studs (0.55 mm thk having one flange of 34mm and another of 36 mm made of GI steel with joints staggerred to be complete in all levels as per design and as directed by the department.

Providing & fixing Armstrong WoodWorks Channeled acoustical wall panels available in nominal size of 792x24O mm having thickness of 15mm. The two long sides interlock with a tongue and groove detail. The two short ends are cut square. Clips I hold the panels to the wall (along the aluminum keel) or to a i grid ceiling. When installed as a wall, the panels can run I horizontally or vertically. The same panels can be used as I ceiling planks when installed on grid system. Installation complete in alla levels as directed.

Supplying, Fixing and Fitting of not less than 50 mm thick wall panelling with 12 mm thk BWR grade Plywood of Greenply/Century make fixed over Gyp steel flanged studs fixed vertically on brick wall at interval of 450mm c/c. The 12 mm thick BWR grade Plywood of approved brand to be fixed on the face with 25mm drywall screw at 300 mm c/c to one sides of 50 mm studs (0.55 mm thk having one flange of 34mm and another of 36 mm made of GI steel with joints staggerred. Finished layer of 4 mm thick veneer of approved brand has to be fixed over the 12 mm plywood base with necessary grooves of 4mm x 4mm (as per design) of Green/Century make veneer including all necessary hardwares. The grooves has to be polished with approved colour and complete in all levels as per design and as directed by the department.

Supplying, Fixing and Fitting of not less than 50 mm thick wall panelling with 12 mm thk BWR grade Plywood of Greenply/Century make fixed over Gyp steel flanged studs fixed vertically on brick wall at interval of 450mm c/c. The 12 mm thick BWR grade Plywood of approved brand to be fixed on the face with 25mm drywall screw at 300 mm c/c to one sides of 50 mm studs (0.55 mm thk having one flange of 34mm and another of 36 mm made of GI steel with joints staggerred. Finished layer of 1 mm thick laminate of Greenlam/Century/Merino make has to be fixed over the 12 mm plywood base with necessary grooves of 2mm x 2mm (as per design) of Green/Century make laminate including all necessary hardwares complete in all levels as per design and as directed by the department.

Supplying, Fixing and Fitting of not less than 75 mm thick partition wall with 12 mm thk BWR grade Plywood of Greenply/Century make fixed over Gyp steel flanged studs fixed vertically onfloor and ceiling at interval of 450mm c/c. The 12 mm thick BWR grade Plywood of approved brand to be fixed on the both sides with 25mm drywall screw at 300 mm c/c to one sides of 50 mm studs (0.55 mm thk having one flange of 34mm and another of 36 mm) made of GI steel with joints staggerred, including 1mm laminate of Greenlam/Century/Merino make on both sides of the partition to be pasted on 12 mm plywood base to be complete in all levels as per design and as directed by the department.

Supplying, Fixing and Fitting of not less than 75 mm thick partition wall with 12 mm thk Calcium Silicate "Hilux Boards" make fixed over Gyp steel flanged studs fixed vertically on floor and ceiling at interval of 600mm c/c. The 12 mm thick calcium Silicate board of approved brand to be fixed on the both sides with 25mm drywall screw at 300 mm c/c to one sides of 50 mm studs (0.55 mm thk having one flange of 34mm and another of 36 mm) made of GI steel with joints staggerred, to be complete in all levels as per design and as directed by the department.

Providing and fixing 2.4m high FRAMELESS GLASS INTERNAL PARTITIONS at all locations with 12mm clear tempered glass or as per elevation drawings enclosed with approved make of 316 grade patch connector S.S. fittings of DORMA/Ozone or equivalent make , fixed with S.S. screws or with fixing clips including necessary filling up gaps at junction, at top, bottom u channel make jindal and sides with required weather silicon with backer rod shall be inserted between alluminium section channel and glass as well as both inside and outside around the periphery of the glass to make the glazing water tight and air tight as shown in enclosed drawings and directions of Engineer-in-charge. Glasswork including making suitable holes in the glass before tempering process of glass, for installation complete as per design drawings. The periphery shall have to be sealed both from inside and outside with silicon weather sealant to make the glazing water and air tight.The sealing of glass to patch connector hardwares with stainless steel fixtures as detailed in drawings. Silicon sealant grade shall be "Dow corning - USA" or " "WACKER - Germany" or approved equivalent as per the design requirement. The partition shall be aligned for the entire height and for the entire length by laser beam equipment to ensure 100 percent X-axis and Y-axis alignment. The glass joints must be properly sealed with weather silicon to make the joint water tight and air tight as well as per design complete at all levels and as directed.

Providing ditting and fixing of 30 mm thk BWP grade green/century/ or equivalent)solid core flush door with 6mm glass panels fixed on rebate on the face and timber beads on back. The edges of the flush door shall be finished with 6mm thk teak wood liping. The timber beads and teak wood lipping shall be polished as per the approved shade of colour and the door to be finished with 1 mm thk laminate of Greenlam/Century/Merino make on both sides as well as the rebate including nessecary harware fittings like 100 mm SS hinges and screws, complete at all levels as per design and as directed.(lock, door closer/floor spring, tower bolt) to be measured seperately.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with15 mm thickANF Bevelled Tegular Edge Tilesand Armstrong Silhouette 15mm Face Exposed Grid. The tiles shall have fissured visual with acoustical punctures, Humidity Resistance (RH) of 95%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C-423 standard, CAC of 30db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 15mm Bevelled Tegular edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 30%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. The tile shall be laid on Armstrong Silhouette 38 profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth” notches to provide mitred cruciform junctions colour global white (Matching to tile color).Grid shall have double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections).The deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of 0T bending capability.

Supply and installation of Merino /Greenlam (Nylon) series cubicles of width and depth as per specifications/ site drawings. Cubicle height will be 2003 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. All doors will be of single colour and made of 12 mm thick HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 no.s Nylon PA-6 made hinges affixed to the pilasters. Nylon PA-6 made coat hook and lock set are provided with each door. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Aluminum made door stopper profiles with rubber linings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs .The bottom gap is 100-150 mm. All intermediate partitions or dividers will be made of 12 mm thick HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the system. Design no. as specified by Arch. / Engr. in suede finish. Size of panels to be as per drawing. The Tile & Grid system used together shall carry a 10-year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate.

Supplying, fabrication and installtion with of Aluminum screen wall as per approved design with Jindal/Hindalco make coloured anodized alluminium rectangular sections of size 100 mm x 60 mm x 2mm to be fixed with aluminium brackets at top and bottom of the 100mmx60mmx2mm aluminium section on MS sub frame. The aluminium sections are to be fixed to a vertical sub frame of MS structure comprising of 50mm x 50 mm x 3.9 mm MS SHS, finished with red oxide and anti rust paint to be fixed on a main frame of supporting channels fixed with 8 mm MS plate by anchor bolts on the RCC structure of the facade wall and complete in all respect at all levels as per approved design. MS Structure to be measured and paid seperately.

Providing and fixing of approved make self-supporting square terracotta baguettes of an average length of 980 mm with not less than 250 mm c/c with one/two internal tubes.The sizes of the louvers can be 50 x 50 x L where L maximum is 1000 mm.Water absorption as per ISO10545-3 should be within 3-7.5%. Breaking strength as per ISO10545-4 should be ≥750 N.The materials should be A1 Fire resistant. Terrakot louvers to be fixed on a main frame comprising of 35 x 70 x 2 mm / 50 x 100x 2mm Mullions, Brackets,Z brackets,Square tubes ,EPDM, 10 x 100 HRD fastners and their necessary components for fixing of the Aluminum tubes and should be anodized/Powder caoted/Mill finish as per consultant.No spring ,MS components to be used to hold the louvers.The sunscreens are to be fixed without any intermediate joints. Finish and color of louvers & aluminum elements would be as per drawing/approval. To be completed at all levels as per design and as directed.

Providing, fitting and fixing of manually operated Black out Roller blinds Hunter Douglas/ Marvel make with necessary hardware complete as per choice and as directed complete at all levels.

Supplying installation, testing and commissioning of 8 passenger (544 Kg.)/ lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type Passenger Elevator 3. Capacity Passenger 8 Persons - 544 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Type of Drive Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control. 6. Location of Machine Room Top 7. Available Travel 12.8 Metres. (Maximum) 8. Serving Basement Floor to 3rd Floor, 5 Stops 5 Levels 5 Openings 9. Well Size (Required) = 1750 mm Wide x 1750 Deep (over plaster) 10. Power Supply 415 V three-phase 50 cycles AC 11. Auxiliary Required Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside) 1300 mm Wide x 1350 mm Deep approx. 13. Required Pit Depth 1600 mm (Mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure Stainless Steel Car 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm/ 400 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Automatic Power operated Centre Opening Stainless Steel Door 21. Landing Entrance Automatic Power operated Centre Opening Stainless Steel Door 22. Clear Opening 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings Direction & Position Indicator 24. Other Features "Battery Operated Emergency Alarm and Light. OSG Electronic Switch. Call Registration LEDS . 2 Station Intercom System Infra-red Light Curtain Door Safety. Auto Rescue Device. Lift Announcement System. "

Providing Soild Wood Grains Exterior Wall Cladding (Greenlam Brand- HPL Exterior Wall Cladding) of approved quality, size, shape and thickness not less than 6mm on exterior walls over aluminium wall framing including temporary scaffolding at all levels where necessary finished complete as specified and directed by the Daprtment. (Walls means exterior walls only). (Greenlam Brand- HPL Exterior Wall Cladding (3100MM X 1300MM)

Supplying and installation of Hunter Douglas Louver (Hunter Douglas 84 R Aluminium Sun Louver) in thickness of 0.60 mm as per design approved coating with necessary MS section frame complete in all levels as specified and directed by the Daprtment.

Providing and fitting Grab Bars (Jaquare make) such as Grab Bar Left 90 Degree Angle, Grab Bar Vertical Swing, Grab Bar 842mm Long etc. for Physically Disabled Persons toilet of Assam Electricity Regulatory Commission Office at Six Mile, Guwahati in all respect as specified and directed by the department.

Supplying, fitting and fixing of Frosted Glass Film (Sparkle Film) on 12 mm thick toughened glass for both side at Assam Electricity Regulatory Commission Office at Six Mile, Guwahati as per direction of the department.

Supplying, fitting and fixing of 6 mm thick Corian Solid Surface (Romano Corian Solid Surface) for Conference Table, Recepetion table, Waiting lobby Wall etc. with necessary polish complete at Assam Electricity Regulatory Commission Office at Six Mile, Guwahati at all levels as specified and directed by the Daprtment.

Supplying, fitting and installation of 3mm thick Alstrong Aluminium Composites Panel Sheets by forming section of aluminium hollow tube in the size 38x25x11 mm sealing the expansion joints with weather sinicon sealant complete as specified and directed by the Department.

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) iii) Jaquar make a) White (iii) Aria (Cat.No.ARS-WHT-0110) / Opal (Cat. No.OPS-WHT-0116) (inclusive of seat cover and fittings)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (C) Jaquar Make (a) White (ii) Compact (Cat.No.URS-WHT-0701)

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. (ii) Hindware Make (a) White (i) Division Plate 680 x 300 (Cat. No.61001)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Under Counter Basin (C) Jaquar Make (i) Florentine (Cat. No. FLS-WHT-0401)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (ii) Glister Super (Bowl Size - 535 x 432 x 200) Glossy

Providing fitting and fixing of chrome plated Jaquar make soap dish (cat no ACN 1131 N)

Providing fitting and fixing of Jaquar make chrome plated Towel ring complete as directed.

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. (a) Jaquar make (i) Continental (Cat.No. ACN-1191N)

Providing fitting and fixing Decorative Mirror complete as directed and specified.Parryware Make Size 800mm x 600mm

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (i) 160mm dia. PVC cowel of ISI make

(ii) 110mm dia. PVC cowel of ISI make

C.P. Grating (ii) 110mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (ii)Jaquare make (a)Continental /Clarion (i)Standard

(iii)2-Way bib cock

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (i)Jaquar (a) Continental / Clarion (ii)15mm dia( Angular stop cock )

(iv) 15mm dia, (Concealed stop cock extra heavy with adjustable wall flange )

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii)Jaguar make (a) Continental

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Jaquar brand a) Continental / Clarion i) Sink cock with swinging casted spout

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) Essco make (a) Telephone shower delux with 1m PVC tube and wall hook

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. Jaquar make (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) a) Continental / Clarion i) Central hole basin mixer without popup waste system with 450mm long copper pipes and brass nuts Cat No. 167

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia.

(ii) 110mm dia.

(iv) 75mm dia.

(vi) 50mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm

(ii) 110mm dia.

(iv) 75 mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (v) 50mm dia

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

(ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

(ii) 110mm dia.

(iv) 75 mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (v) 50mm dia

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

(ii) 110mm dia.

(iv) 75 mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (v) 50mm dia

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

(ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

(ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

(ii) 75 mm dia.

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110 mm dia

(iii) 75 mm dia

Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (i) 160mm x 110 mm

(iv) 110 mm x 75mm

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (i) 160mm x 110 mm

(iii) 110 mm x 75mm

Supplying fiting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. (a) 160 mm

Providing fitting and fixing of Chlorinated Polyvinyl Chloride (CPVC) Pipes having thermal stability for hot and cold water supply with all necessary plain and brass threaded fittings and fixing the pipes with clamps at 1.0 m interval including jointing of pipe. (B) Concealed pipe with cutting chases & making good the walls. a) 15 mm nominal outer dia pipe

b) 20 mm nominal outer dia pipe

c) 25 mm nominal outer dia pipe

d) 32 mm nominal outer dia pipe

f) 50 mm nominal outer dia pipe

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. B) PVC PIPE SUPREME / PRINCE / FUSION /SFMC Brand viii) 160mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. v) 150mm diameter

Supplying and placing ferrocement water tanks of circular/rectengular shape over stagging with manhole cover with locking and clearing arrangement including providing pads of size as required for inlet and outlet pipes complete as directed.(Stagging should be measured and paid separately). (i) 2000 Lt capacity water tank

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. (viii) 100 Users

For deep tube well only for Rig boring/ DTS Boring inclusive of casing pipes and all accessories of pumps etc. c) 200mm diameter

Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of TARUS make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six monthhs (A) IRON REMOVAL FILTERS Taurus make FRP Composite Structural vessel Iron Removal Filters of 100 % rustproof vessels complete with Top & bottom Strainers, Multiport Valves, Quality filter media-e.g Treated Sand,Mno2 ,Barakar Sand Gravels & Pebbles. ISO, NSF certified. (IV) 6000 liters capacity

Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) a) 900X600X450

Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 2 way

Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)

Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

Providing ,Fixing ,Testing & Commissioning of air Release Valve b) 50 mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) c) 100 mm dia

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (b) 100 mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (c) 100 mm dia

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (b) 25 mm dia

Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)

Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(9 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply and Installation of Tannoy mave model CVS 660 Watts continuous, 240 Watts peak power; Coaxial full range ceiling loudspeaker with 0.75" ferrofl uid cooled soft dome neodymium high frequency driver; Multiple transformer taps for 70 V and 100 V line systems or 6 Ohm direct input; Frequency response (-3 dB)1 79 Hz - 21 kHz; Nominal Impedance 6 Ohms.

Supply and Installation of Professional Behringer make model EPQ304 300-Watt Light Weight 4-Channel Power Amplifier With ATR (Accelerated Transient Response) Technology; 4 x 75 Watts Into 4 Ohms; 4 x 50 Watts Into 8 Ohms;

Supply and Installation of Dual 2 Way 5" Full Range Loudspeakers Turbosound make model TCI-53 with Line Transformers;120 Watts Continuous, 480 Watts Peak power; 120, 60, and 30W On The 100 V Line

Supply and Installation of Ultra-Lightweight, High-Density Power Amplifier Behringer make model NX-1000D Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode)

Supply and Installation of On-table Boundary Layer Microphone Sennheiser make model MEB114SB With Programmable Microphone Button (PTT, PTM, toggle ON/off, permanent on) And A Bi-color LED Ring For Status Indication; Frequency Response Of 40 Hz – 20 kHz;

Supply and Installation of Advanced Digital Audio Processor Klarkteknik make model DM8000 with Configurable DSP, Audio Networking and Acoustic Echo Cancellation; 8 Channels of wide band Acoustic Echo Cancellation (AEC) for telephone and video conferencing; 10 high-headroom analogue universal mic/line inputs & 6 electronically balanced low impedance line level outputs; Optional ULTRANET digital audio transport output for connection to compatible devices

Supply and Installation of 55"-inch, Video Wall Panel LG make model 55SVM5F (0.44mm BezelWidth)

Supply and Installation of Wall mount Bracket For video wall installation

Supply and Installation of Real presence polycom DEBUT Polycom make model Real presence point to point Video conferencing system , 4X,1080p.

Supply and Installation of Service warranty pack for Group series ( G300,G500,G700)

Supply and Installation of Popup Box Magnum make model MG 403 ; Easy Access To Connectors Durable Pnematic Movementand Mechanical Latching Mechanism One Female 15pin HD Connector And 3.5mm Mini Stereo Audio Jack, Two CAT RJ45 Network/Data/Phone Connectors, Two Unswitched AC Outputs, One HDMI

Supply and Installation of 8 x 1 High-performance Switcher Aten make model VS 0801H for HDMI Signals.

Supply and Installation of 1 x 4 HDMI Distribution Amplifier Aten make model VS 184A

Supply and Installation of High−performance HDMI Audio De−embedder Aten make model VC 880. The Unit Can De−embed Audio From The HDMI Input Or From The HDMI Output Audio Return Channel To S/PDIF And Analog Audio Outputs Simultaneously.

Supply and Installation of Twisted Pair Transmitter & Receiver Aten make model VE812 For HDMI Signals.

Supply and installation of Gotham make model DGS 2 Audio Signal Cable;Balanced microphone cable with single shield, high flexible, velvet faint PVC-Jacket , Conductor: Stranded bare copper wires 28 x 0.10 mm (0.22mm²) , Jacket: PVC, 6.0 mm max. Ø

Supply and installation of Gotham make model SPK 2X 2.5 High flexible Speaker cable for power amplifiers upto minimum 500 Watt , Jacket - PVC, ø 0.32 in, black Conductor - Stranded bare copper wires, 140x35 AWG (13AWG) ,

Supply and installation of Kramer make model C–HM/HM–3 High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable.

Supply and installation of Kramer make model C–HM/HM–6 High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable.

Supply and installation of Kramer make model C–HM/HM–25 High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable.

Supply and installation of Kramer make model C–HM/HM–35 High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable.

Supply and installation of Amphenol make model KS3P 1/8" (3.5mm) Balanced Phono Plug

Supply and installation of Amphenol make model AC-3 MMG XLR connectors Male

Supply and installation of Amphenol make model AC-3 FG XLR connectors Female

Supply and installation of Amphenol make model ACPR RCA Connector

Supply, Installation, Testing and Commissioning o fLiberty/ Milan/ Anson make 4:3 Format Motorized Projection Screen (Size:- 8 Feet X 6 Feet)

Supply, Installation, Testing and Commissioning of Panasonic/ Sony/ Epson make 4100 Lumens LCD Projectors. Resolution:- 1024 × 768 pixels*3, Contrast*2:- 16,000:1 (all white/all black, Iris: On, Image mode: Dynamic, Lamp control: Normal), Screen size:- 0.76–7.62 m (30–300 inches) diagonally, 4:3 aspect ratio, Display method:- Transparent LCD panel (× 3, R/G/B), Pixels:-786,432 (1024 × 768) pixels

Supply, Installation, Testing and Commissioning of Liberty/ Milan/ Anson make Heavy Duty Motorized Projector Ceiling Lift

Supplying installation, testing, programming and commissioning of Atlona/ Aten/ Kramer make Video equipment 4-Port HDMI Switch Ultra HD 4Kx2K IR/IR Extension & RS232 Remote Control: Display Interface HDMI, Distance Suport up to 15 m (24 AWG), Resolution ultrahigh 4kx2k video, POD, Auto Switching, Audio Support, Serial Support, Instant switching between HDMI input sources

Supply, Installation, Testing and Commissioning of HDMI Repeater Plus Audio De-embedder Atlona/ Aten/ Kramer make : Video Input: Interfaces 1 x HDMI Type A Female (Black), Impedance 100 Ώ; Video Output: Interfaces 1 x HDMI Type A Female (Black), Impedance 100 Ώ; Video: Max. Data Rate 6.75 Gps (2.25 Gbps Per Lane), Max. Pixel Clock 225 MHz, Compliance HDMI (3D, Deep Color) , HDCP Compatible, Max. Resolution Up to 1920 x 1080; Audio Output 1 x HDMI Type A Female (Black); 1 x Toslink (Black); 1 x RCA (Orange); 2 x RCA (Red/White);

Supplying installation, testing, programming and commissioning of Video equipment HDMI HDBaseT-Lite Extender Atlona/ Aten/ Kramer make (4K@40m)(HDBaseT Class B): Video: Max. Data Rate 10.2Gbps (3.4Gbps per lane) 10.2Gbps (3.4Gbps per lane), Max. Pixel Clock 340 MHz 340 MHz, Compliance HDMI (3D, Deep Color, 4K) HDCP Compatible, HDMI (3D, Deep Color, 4K) Max. Resolutions / Distance Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@60m (Cat 5e/6) / 70m (Cat 6a/ATEN 2L-2910 Cat6) 4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)

Supplying installation, testing, programming and commissioning of Compact Full Range 6" Ceiling SpeakerTannoy/ Apart Audio/ Funktion One make 60 W RMS Power,70 V/100V: 60 W / 30 W / 15 W ,UL1480,UL2043 certified

Supply and installation of of Allied Telesis/ Juniper/ Cisco make 2-radio 802.11ac Wave 2 Wireless Access Point. 10/100/1000T (RJ-45) COPPER PORTS:- 1 (PoE-in port), Power Supply:- 100-240VAC, MAX Heat Dissipation:- 41 BTU/h, ۼ Frequency band: 2.4 GHz, Max. peak gain: 1.9 dBi,

Supply and installation of Netgear/ D-Link/ Digisol/ Allied Telesis make 16-Port 100 Mbps Long-Range Unmanaged PoE Switch. 16 × 100 Mbps PoE ports, 1 × 1000 Mbps RJ45 port, and 1 × 1000 Mbps SFP fiber optical port. IEEE 802.3at/af standard. IEEE 802.3, IEEE 802.3u, and IEEE 802.3x standard. High priority ports. 8-core power supply. Up to 250 m transmission distance.

Supply, Installation, Testing and Commissioning of High-Resolution, 40-Watt Bi-Amped Digital Monitor Speakers with USB Input

Supply and Installation of Cusstomized MS Rack with duly painted in black colour.

Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Solid copper cable Cat 6, 4 pair, UTP-305 m Schneide/Legrand or equivalent make as approved by the department.

Patch Panel Cat 6 UTP Keystone 24 port Loaded Schneider/Legrand or equivalent make as approved by the department.

15 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology 360V AC Input (300V – 470V A 3 Ph input- 1 Ph output With Isolation Transformer 12KW output with 0.8 output PF 120 min backup using SMF battery

Patch Cord Cat 6 UTPgrtey 1m Schneider/Legrand or equivalent make as approved by the department.

Patch Cord Cat 6 UTP grtey 2m Schneider/Legrand or equivalent make as approved by the department.

Cat 6Keystone UTP jack with dust cover white Schneider/Legrand or equivalent make as approved by the department.

APW Flexi box Wall mount Rack 6U 19"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock "PDU 6*5A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos."

APW Cyber Rack Server Rack 18U 600X1000mmD Server Rack with Front Glass Door and Rear Perforated Steel Door with Locks. "PDU 6*5/15A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos. Support Stud - 4 Nos."

APW Cyber Rack Server Rack 24U APW President Enclosure, 600mmW CYBERACK 24U / 1000mmD (CRCA Steel Frame with Aluminium Profiles & 2 Nos. of Removable Side Panels with following items: - Top cover with cable entry -1no. - Bottom cover with cable entry -1no. - 19” Mounting Angles – 2 pairs. ,Finish : Powder coated to 80 microns; Matt finish. colour : BLACK with , Load rating capacity -- 500 kgs., Front side vented glass door and rear full perforated steel door with locks. "PDU 6*5/15A - 01 Nos. Fan 90 cfm 230V - 02 Nos. Mounting Hardware (Set of 20) - 1 Set 19"" 1U Cable Manager - 1 Nos. Castor with Brake - 2 Nos Castor without Brake - 2 Nos."

Supply and Installation of Bosch make NDE-3502-AL IP Dome Camera: 1080p and 5MP resolutions; Built-in Essential Video Analytics to trigger relevant alerts and quickly retrieve data; Fully configurable H.265 multi-streaming; Easy to install with zoom/focus lens; Built-in IR illuminator with 30 m (98 ft) viewing distance

Supply and Installation of IP Bullet Camera Bosch NBE-3502-AL Fully configurable H.265 multi-streaming; 1080p and 5MP resolutions; Built-in Essential Video Analytics to trigger relevant alerts and quickly retrieve data; Easy to install with zoom/focus lens; Built-in IR illuminator with 30 m (98 ft) viewing distance

Supply and Installation of 8 Port PoE Switch D-Link/ Digisol make.

Supply and Installation of NVR Bosch make DRN-5532-400N00 32 IP channels with 320 Mbps incoming bandwidth; 12 MP IP camera support for view and playback; Real time live display for 16 channels @1080p or 4 channels @4k; Extended rack-mount unit with advanced connections; Separate internet and IP camera networks

Supply and Installation of 2 TB Hard Disk Drive Seagate/ WD make.

Supply and Installation of Core Switch Allied Telesis AT-x530-28GTXm-Bx1: 24-port 100/1000T stackable L3 switch with 4 SFP+ ports and 2 fixed power supplies. 1 year NCP support

Supply and Installation of Allied Telesis AT-x530-28GTXm-NCA5 Net Cover Advanced 5 Year, Next Business Day Shipment, including Software Updates, where applicable for AT-x530-28GTXm-Bx1

Supply and Installation of 3m SFP+ "Twinax" direct attach cable Allied Telesis AT-SP10TW3

Supply and Installation of Allied Telesis AT-SP10TW3-NCA5 Net.Cover Advanced 5 Year, Next Business Day Shipment, including Software Updates, where applicable for AT-SP10TW3

Supply and Installation of Panasonic/ LG make 55" Display Screen Size (Diagonal)/ 16:9 Panel Type IPS Panel / D-LED Resolution (H x V) 3840 × 2160 pixels Viewing Angle (Horizontal / Vertical) 178° / 178°

Supply and Installation of 24-Port Gigabit Unmanaged Desktop Switch D-Link/ Allied Telesis make 1000Base-T Interface 24; Auto MDI/MDIX Yes; Switching Capacity 48 Gbps Max. Packet Forwarding Rate 35.71Mpps

Supply and Installation of Desktop Telephones NEC DTZ-6DE Network LAN; LCD Display; 11 Keys

Supply and Installation of Voice Communication Server NEC SV9100 : Versatile architecture able to work as an IP system, digital system or a combination of the two; Simple integration into existing IT infrastructure The ability to operate as an analogue, digital or IP system

8 port Expansion Card for Iinstallation of voice communication server.

Providing and installation of NEO-50 WORKSTATION OF 1200MM HT of Featherlite make with Table top : 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Main Partition : Partition is made of 50mm thick NEO based system with fabric above and lamiante below the table top. Fabric and glass markers are provided for each workstation. End Partition : Partition is made of 50mm thick NEO based system with fabric above and lamiante below the table top. Return Screen: 12 MM FABRIC SCREEN OF 450 MM HT Table top Support : 18mm thick Gable ends with necessary MS Brackets. Raceway: Raceways are provided BTT on main spine one frame. rest are provided with skirting for power and data cable management. Skirting is provided on inside. The rest are without skirting. Grommet Hole is considered for each user. MOBILE PEDESTAL 2D+1F SIZE: 400W x 450D x 600HT Pedestal : Pedestal are made of 18mm thick PLB with 2 drawer units and 1 filling folder unit. The Drawer units are made mobile with the use of castors. The drawer units are provided finger grooved handle and suitable locks. CPU AND KEYBOARD TRAY MAIN TOP : 1200W X 600D X 750HT TABLE TOP AND 1200HT PARTITIONS

L-SHAPE MAIN TOP : 1500/1500W X 600/600D X 750HT TABLE TOP AND 1200HT PARTITIONS

Providing and installation of CABIN TABLE of Featherlite make with Specification: Table top : 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Supported : 25mm thick PLB gable ends and 18mm thick 450ht PLT modesty panels with necessary fixtures. Wire Management : Grommet Hole provided on table top. CPU AND KEYBOARD TRAY 1800 X 750X 750 HT Mobile pedestal 2D+1F

1800 X 750X 750 HT SIDE COMPOSITE STORAGE: 1050 X 450 X 750 HT

2100 X 900 X 750 SIDE COMPOSITE STORAGE: 1050 X 450 X 750 HT

Providing and installation of SIGNATURE TABLE (PLB TOP WITHOUT GLASS TOP) of Featherlite make with SIZE: 2300 X 1000 X 750 HT, RETURN TABLE: 1400L X 550 D X 750HT Specifications Table Top: 25mm thick pre laminated particle board with 2mm PVC edge lipping End Legs: 25mm thick pre laminated particle board with 2mm PVC edge lipping & 3 equal drawer pedetal with aluminium die cast arms. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 65mm dia wire manager grommet on table, flip up and provision to place CPU in side extension drawer.

Providing and installation of Secretary Table of Featherlite make with Model: HT-501-A Size: 2200L x 800 D x 780 H, Side Unit: 1010 W x 500 D x 650 H Specification: Material: MDF + particle board of 50 mm thickness. Surface finsish: Melamine Wire manager included. Color: Dark walnut

Providing and installation of STORAGE CABINETS of Featherlite make Specification: Storage is made of 18mm PLB with openable shutters, adjustable shelves, auto hinges, locking mechanism and finger grooved handles. 750 x 450 x 1200Ht

Providing and installation of CONFERENCE TABLE of Featherlite make MAIN TABLE: 2250W X 750D X 750HT (1 NO), SIDE TABLE: 1500W X 750D X 750HT (12 NOS) Specifications Table top : 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Supported : 25mm thick PLB gable ends and 18mm thick 450ht PLT modesty panels with necessary fixtures Wire Management: 300mm Flip Up on each table with cable dump and wire entry cover.

Providing and installation of BOARD ROOM TABLE of Featherlite make SIZE: 4500 X 1800 X 750 HT Specifications Table top: 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Support: 25mm thick PLB gable ends and 18mm thick 450ht PLT modesty panels with necessary fixtures Wire Management: 300mm Flip Up on each table with cable dump and wire entry cover.

Providing and installation of Chamber of State Election Commissioner, , Conference and Board Room Main Chair of FEatherlite make Model: MODEL: FP OPTIMA HB Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards Gaslift - Class 4 tested -ANSI BIFMA performance standards. Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood, Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%. Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support .Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 4 locking positions, back rest “ Return Prevention” function Adjustable Lumbar Support Allows you to adjust the lumbar support position for good back support and blood circulation Tension control is below Seat 3 Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long life. 2 way adjustable - Height & Swivel Adjustable. Seat is duly upholstered with approved with approved Fabric

Providing and installation of Chamber of Secretary, Chamber of Finance and Accounts chairs of FEatherlite make MODEL: LIBERATE HB Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per Castors - Twin Castors 50mm dia castors compling toANSI / BIFMA X 5.1 – 2002 Gaslift: Class 4 tested -ANSI BIFMA performance standards Seating Structure: Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3. Hardness -- 12.6kgf at 25%. Mechanism: Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile Sheets, undergo through CO2 welding process imparting uniform surface finish and strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 4 locking positions, back rest “ Return Prevention” function .

Providing and installation of ACCOUNT OFFICER, SUPERINTENDENT, U SECY, CHAMBER OF DEPUTY SECY, PS TO SECY AND PA TO SECY, chairs of Featherlite make MODEL: ASTRO HB Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002 Gaslift - Class 4 tested -ANSI BIFMA performance standards Seating Structure: Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3. Hardness -- 12.6kgf at 25%. Mechanism: This mechanism is manufactured out of cold Rolled Carbon Steel IS 513-1994 Sheets,The steel components are manufactured with highly precision tools accuracy in matching other parts for smooth functioning. The steel components are fabricated by using Co2 welding process for giving uniform surface finish with higher tensile strength. Springs are made out of Grade II material. Composite release levers for locking mechanism & Gas lift height adjustment. Release lever mechanism for Locking and Gas lift height adjustment. Headrest: Adjustable Headrest. Back: Back Frame is upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust the lumbar support position for good back support and blood circulation Armrest: Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Tension Control : Tension control is below the Seat Fabric: Seat are duly upholstered with approved fabric

Providing and installation of ACCOUNT OFFICER, SUPERINTENDENT, U SECY, CHAMBER OF DEPUTY SECY, PS TO SECY AND PA TO SECY VISITOR'S CHAIR of Featherlite make MODEL: SMART VA Legs:Powdercaoted 4 Legs Back: Tinner Mesh Back. Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted withImported T - nuts and revited in to the wood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3. Hardness -- 12.6kgf at 25%. Back: Moulded Polypropylene back with netted fabric upholstred Armrest: These arms are made out of polypropylene injection molding component which offers the smooth finishes and Scratch resistance. Fixed Arms Fabric: Seat are duly upholstered with approved fabric.

Providing and installation of ACCOUNT ASSISTANT, COMPUTER LAB, RECEPTION & ASSISTANT CUBICLE chairs of Featherlite make Model: Contact Project MB Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards Castors: Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002. Gaslift - Class 4 tested -ANSI BIFMA performance standards Seating Structure: Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with ImportedT-nuts and revited in to the wood Upholstery: Upholstery: Cushion with h pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3. Hardness -- 12.6kgf at 25%. Synchro Mechanism: This mechanism is manufactured out ofcold Rolled Carbon Steel IS 513-1994 Sheets,The steel components are manufactured with highly precision tools Foraccuracy in matching other parts for smooth functioning. The steel components are fabricated by using Co2 welding processfor giving uniform surface finish with higher tensile strength.Springs are made out of Grade II material. Composite release levers for locking mechanism & Gas lift height adjustment.Release lever mechanism for Locking and Gas lift height adjustment. Tension Control: Tension control is below Seat Armrest: Polypropylene injection moulded armrests - Fixed Arms Back: Mesh Back on Frames. Fabric: Seat are duly upholstered with approved fabric.

Providing and installation of Conferenc Front Row and Board Room Chairs of Featherlite make Model: Amaze MB Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002 Gaslift - Class 4 tested -ANSI BIFMA performance standards Upholstery: Seat Cushion with pre moulded foam of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Mechanism: Self Calibrating Multilock Mechansim Tested as per BIFMA Standards. Back Frame is inserted with Mesh & Dynamic Adaptable Lumbar Support Tension control is below the Seat. Armrest: Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable. Fabric: Seat is duly upholstered with approved fabric

Providing and installation of CONFERENCE SECOND ROW FIXED CHAIR of Featherlite make MODEL: CONTACT PROJECT VA Frame The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish. Powdercoating: Thermo set powder coating epoxy polyester hybrids of hardness (pencil) H.B.74 and impact resistant (in lab) 60-160 kgs cm and to a thickness of 40-50 microns is carried out of 7 step pretreatment process. Fasteners: High quality metal hardware conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-1967 Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese T-nuts and riveted into the plywood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3. Hardness -- 12.6kgf at 25% Armrest: Polypropylene injection moulded armrests - Fixed Arms. Back: Mesh Back on Frame. Fabric : Seat are duly upholstered with approved fabric

Providing and installation of Featherlite make SOFA Model: Converse S 900` MADE OFF: THE SOFA IS MADE FOR FINE QUALITY LEATHERITE (3s = 7 mtr, 2s = 5.5 mtr, 1s= 4.5 mtr), THE STRUCTURE IS MADE FROM SILVER WOOD & PINE WOOD , 32 & 40 DENSITY FOAM IS USED WHICH IS COVERED WITH SOFTY FOAM AND ROLL POLY FILLING FOR GIVING COMFORT AND EXTRA SOFTNESS TO SOFA. EXTRA MATERIAL USED FOR 238 SOFA è ELASTIC NEVAR BELT, STAPLER PINS (KANGARO COMPANY) SIZE :1820 W X 750 D X 790 H THREE SEATER

SIZE 1375 W X 750 D X 820 H TWO SEATER

SIZE: 880 W X 750 D X 790 H SINGLE SEATER

Providing and installation o Center Table of Featherlite make Model: 610 FL Size: 1200L x 600 x 500 HT Glass Top with Chrome frame and legs

Variable Refrigerant Flow System With High Ambient Operating Compressor: Supply, Installation, Testing and Commissioning of variable Refrigerant Flow modular type airconditioning system complete with indoor & outdoor units with individual cordless controller as per the following capaicties of the IDU and ODU. Outdoor units. Supply, Installtion Testing & Commissioning of Variable Refrigerant Flow / Volume SYSTEM ( with both Cooling & Heating facility ) comprising of 100% DC inverter based scroll compressor only ,connectable to multiple indoor units as per specification.Outdoor units shall be factory assembled weather proof.Casing constructed from heavy gauge mild steel(sheet metal material is hot zinc plate & sheet metal thickness is 1 mm),must have 100% DC Inverter Scroll compressor in each module & with top Air discharge through. .The system should be of Heat Pump type and should also be suitable for operation within the ambient temperature range of 0 deg C to 40 deg C The outdoor unit shall be be complete with safety devices .The outdoor unit should be fitted with low noise fan with multiple speed DC motor and large air flow.The unit should also be capable to deliver at least 70pa external static pressure to avoid short cycling of hot exhaust air. t, Air-cooled condenser along with in built Micro Processor Panel. Units should be capable to handle incoming voltage fluctuation during operation it should have a voltage operting range from 320V - 460 V 3 phase 50Hz, balanced volt. Considering the long length piping the unit should have a good oil management system to ensure reliability.. The minimum COP of the modules should be 3.5 at 100% load at ARI conditions.Units should be of 5th generation variant The ODU shall have the digital console for monitoring and shall be compatible to BMS. Note : The same system have 100 % capacity upto 43 degree celcius and non stop cooling upto 56 degree celcius .The units shall be as per specifications for the following capacities: Make : MITSUBISHI ELECTRIC /MITSUBISHI HEAVY / TRANE / BLUE STAR , 28 HP- 4 Nos,. Indoor Units for above mentioned outdoor units: Supply, Installation, Testing and Commissioning of 4way supply Cassete type VRF indoor units with compact cooling coil, electronic expansion valve and multispeed fan motor. The blower shall be statically & dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement. The unit shall also consist of drain pan and DRAIN PUMP. The Units shall compability to BMS and as per specifications, 1.3 TR- 8 nos., 1.5 TR- 10 nos., 2.3 TR- 8 nos., 2.8 TR - 4 nos., 3.2 TR - 4 nos., 4 TR - 6 nos. Supply, Instalation & Commissioning of VRF Wall Mounted Split type with Multilevel Filteration multi Fan Speed Auto Restart/Filter cleaning Reminder/Flexible Air Flow patterns, 1.0TR.- 5 nos. Supply, Installation, Testing and Commissioning of Central Control Unit ( PC monitoring System) capable of controlling all the Indoor and outdoor units with necessary cables / controls, necessary software to hook into BMS & other required acessories for navigation and suitable for graphical output as per specification (without PC),- 1 nos. Supply, Installation, Testing and Commissioning of Refnut Joints & Branch Distributors for Indoor & Outdoor units as per specifications, -45 nos. Refrigerant Piping: Supply, Installation, Testing and Commissioning of Interconnecting copper refrigerant pipe work duly insulated with Aluminium foil faced closed cell 19/13mm thick nitrile rubber/Electron beam crosslinked polyolefin foam with thermal conductivity of 0.032W/mk tubular insulation between indoor & outdoor units as per specifications. All piping inside the room shall be properly supported with hanger and all external piping shall run in covered cably tray. The refrigerant pipes shall be of hard drawn type., Ø6.4 - 100 mtrs., Ø9.5 - 160 mtrs., Ø12.7 - 260 mtrs., Ø15.9 - 320 mtrs., Ø19.1 - 100 mtrs., Ø22.2 - 100 mtrs. Ø28.6 - 200 mtrs., Ø34.9 - 30 mtrs., Ø38.1 - 30 mtrs., Ø41.3 - 50 mtrs. MS works: Charges for MS works including supply and fabrication with zinc chromate primer and two coats of synthetic enamel paint including all fixing accessories. - 4 nos. UPVC Drain piping Providing & fixing rigid PVC piping complete with fittings, supports as per specifications and pre insulated with 6mm thick closed cell elastomeric nitrile rubber tubular insulation., 25 MM DIA - 250 mtrs., 32 MM DIA - 100 mtrs. Refrigerant-410a Supply , charging & Leackage testing of refrigerant -410a in additional copper piping circuit. - 110 kg. TRANSMISSION & CONTROL WIRINGProviding & fixing control cum transmission wiring in medium duty PVC Conduit between indoor and outdoor units.2C x 1.5 Sqmm Cu Cable - 1100 mtrs. Lifting & shifting of ODU & IDU - LOT.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. SB. 8.1.1: 120 watt electronic modular step speed control 2 - module type WHI

Supplying with fitting and fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 6/10 amp one way modular clip in switch with LED , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 6/10 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 16 amp two way modular clip in switch , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 3 module type Metal

4 module type Metal

6 module type Metal

8 module type Metal

12 module type Metal

18 module type Metal

Supplying including fitting and fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module

4 module

6 module

8 module

12 module

18 module

Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of RJ-11 Telephone jack , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying testing and commissioning of Time switch MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in the existing control panel as specified and directed by the department.

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager, Crabtree xpro make) 6 to 32A

C Series (Schneider MG, legrand, Hager, Crabtree xpro make) 6 to 32A

3. D Series (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager, Crabtree xpro make) 40A

C Series (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 25A

Supplying with fitting and fixing Over Voltage protector at 400V network (Schneider or equivalent make), complete with making necessary connection as approved, specified and directed by the deptt.

Supplying with fitting and fixing Surge protector of max operating voltage 350V at 400V network for maximum discharge current 40KA, with operator indicator and draw out cartridge of Schneider or equivalent make), of the following ways complete with making necessary connection as approved, specified and directed by the deptt. Surge protection Max operating voltage 350Vintegrated type 3P + N

Supplying with fitting and fixing 7segment sheet steel, phosphatised, powder painted surface mounting TPN DB (IP 20) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. with provision for 125A FP MCCB as incomer, DP MCB/RCCB/RCBO as sub incomer and SP MCB as outgoing complete with making necessary connection as approved, specified and directed by the deptt. 4way (8+12+12)

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) . 3 core A2XWY A2XFY 4.00 Sq.mm 3 Core armoured U.G. cable

6.00 Sq.mm 3 Core armoured U.G. cable

4 Core, 2XWY 2XFY 4.00 Sq. mm.4 Core U.G. armoured cable

6.00 Sq. mm.4 Core U.G. armoured cable

10.00 Sq. mm.4 Core U.G. armoured cable

16.00 Sq. mm.4 Core U.G. armoured cable

35.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 228

Inter/Exter Bend 228

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make Copper tube terminal heavy duty BIS 4579 Copper tube terminal heavy duty BIS 4579 Size: 1.5 - 5

Copper tube terminal heavy duty BIS 4580 Size: 1.5 - 6

Copper tube terminal heavy duty BIS 4581 Size: 2.5

Copper tube terminal heavy duty BIS 4582 Size: 4

Copper tube terminal heavy duty BIS 4583 Size: 6

Copper tube terminal heavy duty BIS 4584 Size: 10

Copper tube terminal heavy duty BIS 4585 Size: 16

Copper tube terminal heavy duty BIS 4586 Size: 20

Copper tube terminal heavy duty BIS 4587 Size: 25

Copper tube terminal heavy duty BIS 4588 Size: 35

Copper tube terminal heavy duty BIS 4589 Size: 50

Supplying including installation of UPS 20 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology 360V AC Input (300V – 470V) 3 Ph input- 1 Ph output with Isolation Transformer 18KW output with 0.8 PF, 60 min backup using SMF battery

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 4P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 160A

Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 50 KA 415V 50 Hz 4P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 630 A

Supply, installation & commissioning of Advanced Lightning protection system by using High pulse Voltage ESE Lightning conductor with Optimized Pulse Rod (ABB or equivalent make) as specified and directed by the deptt (as per NFC 17 - 102 STANDARD & IEC Std 60 - 111989)

Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt. with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supplying with fitting and fixing of Electric storage water heater [Geyser] of Bajaj/Crompton/Racold/V. Guard or equivalent make including necessary connection cable, as as required complete, as directed by the Department. 15.00 litres. Capacity (5 Star Model) (Bajaj / Ramson or equivalent make)

Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guard) suitable for 100 mm bore well and above. 1.5 HP STAGE 5 to 26 with MCB controlled Submersible motor pump set control panel.

Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guard) suitable for 100 mm bore well and above. 5 HP STAGE 14 to 50 with MCB controlled Submersible motor pump set control panel.

Supplying fitting and fixing including necessary connection as approved by the Deptt. of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)25 HP, 24TO 39 A.

Fully Automatic citation Star delta Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) for 13 - 20 A 3 to 15 HP motor.

Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt. 3 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm A class insulation with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying with fitting, testing of following capacity Water Pressure Booster Pump set with electro-coated cast iron parts high efficent motor (GRUNDFOS or equivalent make) complete with necessary connection as approved, specified and directed by the Department Water Pressure Booster pump set ( Model No-CM 3-3) of 0.7 HP ( Suction pipe size 25 mm & Delivery pipe size 25 mm).

Supplying with fitting and fixing of Single Phase Modular Motor Starter switch MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. Overload Relay Range 16 - 25 Amps in 3 Module

Supplying including fitting and fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved and as directed by the Department [ without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make)

Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. Power Flow 225 mm sweep (ORIENT make)

Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. Heavy Duty 450 mm sweep 900 RPM Single phase (Crompton make), Heavy Duty 450 mm sweep 900 RPM Single phase (Usha make)

Supplying fitting and fixing of double wall brackets model FCG 308, (or equivalent as approved by the Deptt.) on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories including connection as required complete. ( without Lamp).

Supplying fitting and fixing of single wall brackets model 34095 /11, /06 (or equivalent as approved by the Deptt.) on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories including connection as required complete. ( without Lamp).

27.4 Supplying including fitting and fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. 27.4.1 (CROMPTON /ORIENT/Havells/USHA or equivalent make) 27.4.1.1 SDX 120 with metal body metal blade 400 mm sweep

Copper pipe including cable fitting ( 1/4, 1/2, 5/8)

6.2 Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

6.3 Supply and fixing 32 mm mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply, installation, testing & commissioning of 2 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : (HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.)

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : HONEYWELL, MORLEY IAS, or equivalent as approved by the Deptt.)

Supply, installation, testing & commissioning of intelligent plug in Thermal Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make :HONEYWELL or equivalent as approved by the Deptt.)

Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supply & fixing of 2X1.5sq. mm. PVC insulated copper Armoured Cable on surface/ recess/ above false ceiling etc. as required. (ISI marked) )

Supply, installation, testing & commissioning of Control Module.UL / LPCB approved, make - Honeywell , MORLEY IAS, or equivalent as approved by the Deptt.) with housing box

Supply, installation, testing & commissioning of Addressable Hooter / SOUNDER complete with control module.UL / LPCB approved, make - HONEYWELL, MORLEY IAS, or equivalent as approved by the Deptt.)

Supply, installation, testing & commissioning of Response Indicator to give visual indication of detection of smoke - RED colour LED for indication. make - Agni Suraksha, or equivalent as approved by the Deptt.)System Sensor.

Supply, installation, testing & commissioning of Manual pull station with addressable interface, built in LED with key reset facility. UL / LPCB listed. make : HONEYWELL, MORLEY IAS, or equivalent as approved by the Deptt.)

Supply, Installation, Testing, Commission of Loop card for Addressable Panels make- MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) . RG 11 armoured

Supplying, installation, testing and Commission of the following indoor Decorative Recessed mounted 2' x 2' LED down lighter luminaries of model no- RC380 B LED 36S-6500 G4 L60 PSD OD WH OC / RC380 B LED 36S-6500 G4 L60 PSD OD WH OC / LCTRS-36-TL / LCTRS-36-CDL / IO2830RP00 / IO2840RP00 / IO2850RP00 complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Philips / Crompton / LT make).

Supplying, installation, testing and Commission of the following indoor Decorative Recess mounted LED down lighter luminaries of model no-DN 393 B LED 12 S-6500 PSU WH / D01257R000 / D01240R000 / D01230R000 / CRDL11R017HP57 complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar / LT / Wipro make).

Supplying fitting & fixing of LED Kubik Batten tube light fitting 300mm length as required and as directed by the department ( Jaquar or eqvt. make). kubik Series Batten tube fitting 20W

Supplying, installation, testing and Commission of the following indoor Decorative Recess mounted LED down lighter luminaries of model no-LESP01R009XC / LESP01R009XN /LESP01R009XW / L00957R000 / L00940R000 / L00930R000 /LD90-111 - XXX-65-XX complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar / LT / Wipro make).

Supply, installation, testing and commissioning of LED Signage Board (23 ft x 10 ft.) as specified and directed by the department

Peon Call Bell System (Forbix Make): Supply, Installation, Testing and Commissioning of Peon Call Bell System 5 way (wireless) Forbix make as directed by the Department.

M/s Macrocosm Builders

HATIMURIA DEVELOPERS PVT.LTD.

Power Tools and Engineering