Renovation of Panchayat Union Primary School North building South facing two class room in Athukurichi at Chithamparapuram panchayat in radhapuram Panchayat Union

Amount

Renovation of Panchayat Union Primary School

Removing the Exsiting RCC Roof in all labour charges

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.(Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Supplying fabrication and installation of roof using 50mm tk PUFF sheet tap sheet 0.40mm tk and bottam sheet 0.45mm tk total 50mm tk including cost of making puff sheet using superior quality puff matrial self tapping screws as per manufacturers recommendation and the rate is inclusive of fixing ridge sheet at the tap with necessary self tapping screws etc complete as directed by the departmental officers .

Supply and fixing Mild steel Rectangular tube section for Reepers of size 50x25x3mm @ 3 kg/Rm @ 0.35 m C/C ( Use this tuber section for roof, the truss provided to be 1.50 m C/C For Single tiled roof), ( For Double tiled roof use 11/4"x11/4" size

Paving the floor with best quality Vetrified (Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Re Painting old wood work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer

Providing Cupboard for Teacher

Brickwork in c.m. 1:5 mix using country bricks ground moulded of size 23x11x7 cum including cost conveyance of all materials to site ect complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Providing cuddapah slabs 20/30mm thick including curing etc.,

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

Providing Cup Board Shutter with frame using water Proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter (Sl.No 124)

CONSTRUCTION OF CHAPPAL RACK OUTSIDE THE CLASS

Brickwork in c.m. 1:5 mix using country bricks ground moulded of size 23x11x7 cum including cost conveyance of all materials to site ect complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Providing cuddapah slabs 20/30mm thick including curing etc.,

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

labour charges for fixing cuddapah slab 38 to 40mm for shelfs etc., all complete

PROVIDING ELETRIFICATION ARRANGEMENTS FOR SCHOOL BUILDING

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of CFL bulb SD 80

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Bishmer (BID ID -1161049)