AR MO to various residential buildings under Division No.III Shimla. SH Repairing work in kitchen, bathroom toilet, PF sanitary fitting G.I. pipeline repair of plaster work in block.O.II set No. 105 type.II at Nabha Estate Shimla

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work including carriage of materials within all leads and lifts.: In Foundation and plinth

Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) in all leads and lifts as desired by Engineer in Charge.

Providing Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding,cutting and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals. Above plinth level upto all floor level including carriage of materials within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(i) 1:2:4 (1 Cement :2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts.

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials in all leads and lifts

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials within all leads and lifts.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and Fixing of CP. Jet with pipe 1.5 Mtr. With Hook of approved brand at DDU Zonal Hospital Shimla for 24 Hours on urgent basis as per direction of engineer in charge.

Providing and fixing 610mm x510 mm bowl depth 150mm size Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board complete including carriage of materials within all leads and lifts.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials within all leads and lifts :-Solid Type :-White plastic seat and cover HINDWARE MAKE

Providing and Fixing of PVC. Waste Pipe 32mm Nominal size of approved brand as per direction of engineer in charge.

Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts

Providing and Fixing of CP. Towel Rod ( Heavy duty) Diamond Make of approved brand at DDU Zonal Hospital Shimla for 24 Hours on urgent basis as per direction of engineer in charge.

Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts

Providing and fixing 460x130x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. AC-307

Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing uplasticised PVC connection pipe with brass unions : including carriage of materials within all leads and lifts 15 mm nominal bore

Providing and fixing Steel wired connection pipe: 60 cm length 15 mm nominal bore viking made

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts

Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts.

Providing and Fixing of angle Cock 15mm Nominal size of approved brand including carriage of materials within all leads and lifts.

Providing and fixing 15 mm C.P brass pillar tap with capstan head Long body including carriage of materials within all leads and lifts.

Providing and fixing Sink mixer of approved quality including fittings etc. complete including carriage of materials in all leads and lifts. Cat No P-127

Providing and fixing 630mmx450mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts

Providing and fixing C.P. Flange of approved make and quality including carriage of materials within all leads and lifts. as per direction of Engineer-in-charge.

Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete including carriage of materials within all leads and lifts 110 X 90 mm.

Providing and fixing 110mm PVC finolex Plain Tee ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts

Providing and fixing PVC (finolex )110 mm dia Plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing PVC (Finolex) degree bend 110mm dia ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing PVC (finolex )110 mm dia collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing G.I pipes complete with G.I fittings and clamps , i/c cutting and making the good thewalls etc. internal work exposed on wall 15 mm nominal bore

Providing and fixing G.I union 15mm including carriage of materials within all leads and lifts.complete. including carriage of materials within all leads and lifts

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer In-Charge. With cement mortar 1:6 (1 cement : 6 fine sand)

Providing and Fixing of C.P. Curtain Rod 20mm thick Ess Ess 304 Grade of approved brand as per direction of engineer in charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts