Supply and Erection Prices of Materials for construction of 33 KV Line from 132 KV S/S Maandhata to 33/11 KV S/S Vishwanathganj Distt. Pratapgarh on Semi Turn-Key Basis

SUPPLY & ERECTION OF WORK AS PER RESSPO NORMS.

Work of O/H Line

Pole to Pole survey of complete line route for fixing the location of line support section pole angle support crossing support etc. above work to be done by contractor before starting the line work.

Digging of pits of size 0.45x1.25x 1.50 mtr. for erection of PCC pole 9.00 mtr. long ( S/P,D/P,T/P, F/P)

Digging of pits of size 0.45x1.25x 1.85 mtr. for erection of S.T. Pole 9/11 mtr. long for making S/P,D/P,T/P, F/P, Xing HT/LT line and canal etc

Erection of single PCC pole of 9 mtr long .

Erection of single pole S.T.P. 11 mtr long at X rings.

Fabrication and erection of double pole of S.T.poles 9/11 mtr long.

Fabrication and erection of Tri-pole of P.C.C. poles 9 mtr long with Riser.

Fabrication and erection of four pole structure of 33 KV Line S.T.P. poles 9 mtr. long.

Mounting and fitting of V-type cross arm, 33 KV pin, pin insulator, earth clamp complete in all respect as per drawing of RESPO on single PCC pole 9 mtr long and single S.T. pole 11 mtr long. Cross arm, Pin, Pin insutator provoided by Department and cross arm clamp, Danger board with clamp shall be provided by the contactor. (As per Resspo Specifications.)

Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 33 KV pin & pin insulators, disc insulator and disc fitting on P.C.C. and S.T.P. double pole. Top channel bracing M.S. angle, 33 KV pin and pin Insulator. Disc Insulator and disc fitting provided by Department and Earth clamp, stay clamp, top channel clamp, bracing clamp, danger board etc. shall be provided by the contractor. (As per Resspo Specifications.)

Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 33 KV pin & pin insulators, disc insulator and disc fitting on P.C.C. and S.T.P. Tri-pole. Top channel bracing M.S. angle, 33 KV pin and pin Insulator. Disc Insulator and disc fitting provided by Department and Earth clamp, stay clamp, top channel clamp, bracing clamp, danger board etc. shall be provided by the contractor. (As per Resspo Specifications.)

Fabrication, mounting and fitting of top channel, bracing made by M.S. angle, earth clamp, danger board, pin and pin insulators, disc and disc fitting on four pole structures. PCC 9 mtr./ STP 11 mtr. Top channel bracing, pin and pin insulator, disc and disc fitting provided by Department and Stay clamp, Top channel clamp, Bracing clamp, earth clamps and danger board etc. shall be provided by the contractor.(As per Resspo Specifications.)

Grouting of single PCC pole 9 mtr long with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6.Cement, sand, brick, ballast shall be provided by the contractor.(S/P, D/P, T/P, F/P)

Grouting of single S.T. support 11 mtr long with cement, sand and brick ballast in ratio 1:4:8 size 0.45x 0.45x1.85 mtr deep under the ground and 0.45x 0.45x 0.45 mtr above the ground including plastering and polishing with neat cement (It includes the Grouting of ST poles of single pole support, double poles, tripole and four pole structures.) Cement, sand, brick, ballast shall be provided by the contractor. (As per Resspo Specifications.)

Digging of pits of size 0.60x 0.60x1.2 mtr and grouting the stay rod anchor plates 0.45x 0.45x 0.45 mtr with cement, Jamuna sand and brick ballast ratio 1:4:8 as per drawing No. RES-16. Cement, sand, brick, ballast shall be provided by the contractor. (As per Resspo Specifications.)

Complete fitting of stay rod and fastening stay wire including fitting of stay clamp, turn buckle, and making ring of stay wire on both ends in seven strands 9” to 12” long. Stay clamp, Turn buckle shall be provided by the contractor.

Earthing of single PCC/ ST pole by digging 1.00 mtr deep pit and driving the electrodes of MS earth rod and connecting all the metallic parts of poles with earthing rod by G.I. wire and filling pits with soil after completion of earthing.earth wire/ G.I. wire M.S.rod shall be provided by the Department.

Work of road, canals, telephones and H.T. line crossing by providing guarding angles/channels on supports and fabrication and fiting of guarding net as per drawing No. 48 with G.I. wire No. 8/10 SWG, Granding angle except granding angle and G.I. wire all other materials provided by the contractor. (As per Resspo Specifications.)

Painting of single support, double poles with fittings and tripole/four poles with fittings of 11.0 mtr. long STP with two coat of red oxite primer and one coats of good quality aluminium paints giving silver white finish below the cross Arm/ Droper channel.

Single support STP 11 Mtr. long.

Double pole STP 11 Mtr. long.

Tri-pole STP 11 Mtr. long. (Necessary paints will be supplied by the contractor.)

Carriage with loading & unloading including other work:- Loading carriage and unloading of following line materials from Electy. Store Center Prayagraj/Pratapgarh to dump site store. The materials will be provided as per availability and in piece meal.

P.C.C. 9 Mtr. Long.

STP 11 Mtr. long.

ACSR Dog conductor.

Other centrally procured items as per requirement for construction of line (Disc, Disc fitting, X-arm. Pin, Pin Insulator, stay rod, earth rod, M.S. rod, G.I wire etc.

Jumpring of 33 KV line on 33 KV Bay using P.G. Clamp dog to dog & dog conductor & binding of jumper and other accessories on terminal gantry at 132 KV S/S Gadwara Disst. Pratapgarh. Binding wire & P.G. Clamp, Aluminium Lug etc. provided by the Contractor complete in all respect.

Om Engineering Enterprises

J.P. Electric Works