REPAIR/REPLACEMENT AND RENEWAL OF FLOORING AND ALLIED WORKS IN CERTAIN BLDGS UNDER GE UMROI

Amount

Material and labour rendering 15mm thick in cement mortar (1:6) on brick or concrete surface finished even and fair without using extra cement including taking down cement plaster on brick work of any description including racking out joints and clearing dust etc including removing rubbish material, complete all as specified and directed

Material and labour for 15mm thick rendering in CM (1:4) in two layers mixed with water proofing compound (bonding agent sika/fosroc) @ as per manufacture direction by weight of cement in top 5mm thick finishing the surfaces with fair and even without using extra cement including taking down cement plaster on brick work of any description including racking out joints and clearing dust etc including removing rubbish material, complete all as specified and directed, complete all as specified and directed.

Supply only integral liquid waterproofing compound etc complete all as specified and directed.

Material and Labour preparartion of new plastered surfaces by means mechnical process / Machine as directed by manfucaturer through authorised applicator of manufacturer,s and applying two coat of100 % Acrylic Exterior Emulsion paint (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shield Max Brand/J&N:Safeguard Optima Brand painting over and including a coat of primer to new plastered or unplastered surfaces on walls including preparation of surfaces, complete all as specified and directed. Note (Work shall be exectuted through authorised applicator of manufacturer,s and shall be get approved by GE before commencement of work).

Material & Labour for applying two coats of oil bound distemper by roller over a coat of alkali resistant primer with 1.5mm thick wall care putty and including preparation of surface, complete all as specified and directed.

Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width including Dismantling wall and ceiling board any thickness with cover fillets, all complete at all heights as per direction of Engr-in-charge.

S&F Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilation with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle cum complete and as directed.

S&F in repairs for wooden laminated (LGF) flooring size 120x20x0.8 cm thick including laying of foam required thickness all necessary and beading fitting and fixture thick all as specified and directed. Size may varies of strrip markets availeblity, complete all as specified and directed. (Make; armstrong, action tesa or equilent)

S&F 12 mm thick toughened glass in door/openable type fixed with pivot including all necessarry SS fitting and fixture arrangment like handle, clamp, Double action floor spring heavy duty, Centre Patch lock with key etc shall be include, complete all as specified and directed

Supply and fix in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed

Supply and fix in repairs of Northern hard maple wood sports flooring system for squash court. SURFACE BOARD ;- 1st Class Northern Hard Maple Wood Sports Flooring “Certified by the BADMINTON WORLD FEDERATION (BWF) approved Wooden Sports flooring system according to BWF standards - Grade 1” finished with 21mm thick, 57 to 83mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti-termite and water-resistant lacquer. THE UNDER FRAME : - Resilient SPF Pine Wood sleeper sub floor of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 10 mm thick EPDM air cushioned pads, stappled through the two wings at 350 mm x 350 mm, complete all as directed by Engineer in charge

INSTALLATION : - IPS sub floor treated with a vapour barier to be placed on the levelled IPS subfloor before laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls. FINISHING : - After installation the floor will be machine sanded in uniform level and finished with WATER BASED PU POLISH . (Note :- squash court Flooring specifition follow.)

Material and labour for applying Squash Court Wall hard plaster system as per international standard, the plaster consists of a 10-12 mm base coat with silica sandand top coat sports master of 5 mm thick which makes it total thicknesh of 15-17 mm as per manufactured intruction, complete all as specified and directed by Engineer in charge

Material and labour for applying RED colour PU paint on wall surface and wooden flooring surface, complete all as specified and directed by Engineer in charge

Material and labour for Vitrified ceramic tiles 600 x 600 mm 8-10mm thick as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick screed bed in CM 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed by Engineer in charge.

ditto- as per item No 17 above but as in skirting / dado over 10mm thick 1:4 cm backing coats etc including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed by Engineer in charge.

Material and labour for 18- 20 mm thick granite of any type, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixtur of pigment to match the shade of granite stone laid over 15 mm thick 1:4 cm screed bed including grinding & polishing etc, complete all as specified and directed by Engineer in charge.

Supply and fix in repair ornamental looking mirror fancy type 5mm thick glass with chromium plated screw incl polishing, complete all as specified and directed.

Supply and fix in repair vitreous china wash basin, oval type under/ over counter shape of size 550x460mm laid over stone slab including brackets of approved size including necessary cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of steel Corrugated/semi corrugated or translucent sheet as in roof coverings, complete all as specified and directed.

Supply and fix in repair 2.0 mm thick fibre glass reinforced coloured translucent corrugated /plain sheeting with two corrugation side lap as in roof covering, fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and directed.

Supply and fix in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Supply and fix in repairs CP brass tubular towel rack with lower hanger, fancy type, superior quality, fixed with screws complete all as specified and directed.

Supply and fix in repairs CP brass towel ring 20mm dia, fancy type, superior quality, fixed with screws complete all as specified and directed.

Supply and fix in repair 8 mm thick glass corner shelf 250 mm complete all as specified and directed.

Supply and fix in repair for Rubber door seal 32mm wide and 5mm thick with Aluminium strip of size 19mm wide and 2mm wide fixed with machine steel screw with washer, complete all as specified and directed.

Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity( tripple layer wall construction , Cylindrical vertical with closed top) ISI marked hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Cleaning of PVC water tanks of capacity 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning all and specified and directed.

Schedule of Credit