Providing and Fixing of National Flag including Flag Mast at Community Centre, Sector-55, Ward No. 02, Division-1, NIT, Faridabad.

30M Hot Dip, galvanized insideand outside in Single Dip, suitable for wind velocity as per IS 875 Part-3 Three Section Hot Dip Galvanized Pole Size Bottom 410MM and Top 150MM, Plate Thikness 5/4/3. Base Plate 640X20MM with PCD 640MM, with three Section 10.5 Mtr. with Motorised System With Gear Box and All Accessories. QTY-1 Indian National Flag Size (20X30) Feet with 100% Shiny Knitted Polyster with Rainforced Super Stong Nylon.with Flag Lock ( Import form Flag House) QTY-2 Yellow powder coated of iron Decorative Dome. QTY-1 1 HP (Horsepower) ˜ 0.75 kW 3 phase meter,Voltage: 415V AC ±10% , Frequency: 50 Hz and RPM: Typically 1440 RPM (may vary depending on design) 6mm dia Galvanized Iron (GI) wire rope with Thimble with hook, eyelet, or wedge socket double drum, Winch Box for lifting, pulling, or positioning loads by wire rope and 3 Phase Energy Meter with all accessories QTY-1 Earthing Roads and Fitting (40mm *1 mtr GI Chemical earthing) with a backfill mixture (typically bentonite plus carbon or graphite plus minerals), which maintains moisture and enhances conductivity Hot-dip galvanized (min. 80–100 microns zinc coating) , Both ends are sealed to prevent chemical leakage and Bore a pit (150–200 mm diameter, 1.5 meters deep) QTY-1 Supply and Installation of Red Color LED Indication pilot Lamp mounted on top of the Flag, Voltage 24V and 1.5W Power Consumption QTY-1 Supply, installation, testing and commissioning of a complete Feeder/Control Panel Box scheduled control of electrical loads , Sheet steel fabricated, rigid, dust-proof, vermin-proof Panel , CRCA Steel Sheet (minimum 14/16 SWG thickness), Powder-coated with 7-tank pretreatment process , MCB of 3P/2P/1P, 32A–10A IS/IEC 60947 Qty-1 5 Mtr Octagonal Pole Supporting Pole for Light with Foundation Bolts M16X450MM with Nuts and washer with Tamplete and civil foundation of 2/2 size QTY-2 350 Watt led high-lumen, energy-efficient outdoor lighting fixture designed to replace traditional metal halide or halogen lights to Focus for Flag with 2 year Warrenty QTY-2 Civil Foundation of 30M Pole including all MS Rods , Cement , Dust , aggregates mixture with shattering, PCC , Footing , Soil filling and RCC foundation of (9/9) Size QTY-1 Painted of PU Paint , Thinner and Painting Charge of 30M Pole and 2 QTY of 5 Mtr Octagonal Pole Pure White Colour with Best Finishing. QTY-1 Alluminium Armoured Cable 25mm * 4 Core (Polycab) (3 Phase cable) 2.5 sqm dual core Power cable , thimbles, Lugs and other accessories QTY-1 Transportation Charges of 30M Pole , 5M Octangonal Poles and National Flag QTY-1 Installation Charges of Pole , Flag and Other accessories QTY-1 Civil RCC foundation of M25 grade 7/7 in Double Round Circle QTY-1 Black Polished Granite stone Marble on round foundation Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge QTY-1 Supply and installation of 16 Gauze SS Railing GS 304 on round about flag foundation Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement QTY-1 High mast Pole installation service with Hydra QTY- 1 Annual Maintenance Charge for 2 years (Accident and Natural disaster not included in maintenance )