Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAccepted-AOC PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹27.4 L+₹5.0 L (22.1%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹27.8 L+₹5.4 L (23.9%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹33.0 L+₹10.5 L (47.0%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹38.7 L+₹16.3 L (72.7%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
21 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
CERTAIN BR REPAIR TO OTM ACCOMMODATION AT OLD NAVY NAGAR UNDER AGE BR I NW NAVY NAGAR COLABA MUMBAI
2022_MES_547500_1
8267E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹90,000
Yes
25 Nov 2022
25 Aug 2022
22 Sept 2022
25 Aug 2022
21 Sept 2022
8 Sept 2022
25 Aug 2022 - 14 Sept 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 400x 400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)
S & F Non Skid rectified ceramic floor tiles 8 to 9 mm thick of size 600x 600 mm as in floors etc approved colour set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : (i) The rate includes the cost of cement screed bed
S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick backing layer in CM 1:4.as specified and directed.
Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge
Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.
M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.
M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)
M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster )
Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc
M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)
M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.
Supply only water proofing compound of ISI make
S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding
S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) n .exc 1.5 sqm
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete in1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts
M & L MS works in holdfast made of fe -290
S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length.
S & F Aluminium handles, cast type, anodised of length 150 mm
S&F 100mm size stainless steel medium weight butt hinges all as specified.
Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any hight )
S & F CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed
S & F CI soil/ waste/ vent pipe s in any length with ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed
S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminishing pieces or tapers on walls complete all as specified.
S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed
Taking out shrubs/vegetation growth from building at any height and at any location with root and applying a glyphosat pesticide or any other equivalent pesticide in a ratio of 1:50 with water on roots including taking down cement plaster not exc 0.50 sqm for each tree and making good surface by plastering the same area with 20 mm thick plastering in cement mortar 1:4 and finishing the surface to match existing surface with necessary scaffolding and other required T&P all as specified and as directed.
Cleaning existing drainage / culverts of any depth including removing cover slabs/grill , soils , spoils , vegetation , silt etc and refixing/placing of removed cover slabs/grill including making good in cement mortar 1: 3 and removing material outside the MD land complete all as directed and specified.
Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge
S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
All as per item No. 33 here-in –before but except sheeting( any thickness).
Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete
M & L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4
Taking down cement or cement lime plaster on brick or stone walls, any description , including raking out joints, hacking for key, scrubbing down with water, etc.
M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)
M&L udaipur White marble/Green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffits & floor etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete (Note : The rates included the cost of cement screed bed 10 mm thick)
M & L in repairs for anodised aluminium snap grid frame work for false ceiling with and including 4 mm thick Non asbestoes cement building boards (size of grid 605mmx605mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete .
S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102
S&F 5.5 mm thick repairs frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.
M&L Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as directed.
M&L applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer & & 2 mm thick Putty on Old plasterd surfaces of wall after necessary preparation of surface complete all as specified.
S & F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.
Preparing of old decorated surfaces of walls by washing the surfce thoroughly , filling the cracks, craves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Funges formation be cleaned throughly with wire brush or by any means.
Supply & fix Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop at of primer erected in position as indicated complete push pull or manual type thickness of lath is 1.25mm including taking down old shutters complete all as specified and directed.
Taking down and refixing of steel rolling shutters after carryout necessary repair greasing,top cover, anchoring rod, hasp and staple and erected in position as indicated, complete complete all as specified and directed
M & L for providing and fixing two tyre Gypsum Board false ceiling of 12 thick fixed with screws as per manufacturer's instructions including S &F GI frame work for seamlesss ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entreintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. GL. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI. flat 40 x3 mm size 60mm long and expansion |hold fasteners12,5mm dia. 40mm long complete all as specified.
Supply and fix for 12 mm thick ply wood as in vertical surface as wall pannelling with wooden planks of size 50 mm x 50 mm of second class hard wood having spacing of 600 mm C/C and fixed to wall with nails and finish the surfae with two coats of varnish polish including a coat of primer complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty (150 Kg load capacity) and fixed including taking down old u/s one complete all as specified and directed
M & L for one coats of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as directed.
Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge
S&F toughen glass 12 mm thick as in door shutter inlcuding necessary SS hinges complete all as directed including taking down old u/s glass.
M&L applying two coats of raincoat over a coat of primer on new plastered surfaces of wall after necessary preparation of surface complete all as specified.
S&F Framed brackets of angles or tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc nexc each 10Kg bracket confirming to Fe 410 or Fe 310-0 all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided
S&F Solar control film 50 micron reflective type (glareware sun control or equivalent) including taking down old U/S film complete all as directed.
RAMESH ENTERPRISES
Unitech Enterprises
sri ram construction
SAHU AND SAHU CO.
BOB ENTERPRISES
Nilesh Construction
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .