SPECIAL REPAIRS TO ROOF AND TOILET IN BLDG NO 292 OTM AT UMROI MIL STATION UNDER GE UMROI

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each of any discription, complete all as specified and directed.

-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each, complete all as specified and directed.

M&L for plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded, complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F pressed steel door frame 125x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick etc, complete as specified and directed.

Supply and fixing 32 mm thick waterproofing and fire proofing Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed by Eng-in-Charge.

S&F of 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm aluminum anodised bow handles, complete all as specified and directed, complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm aluminum anodised bow handles, complete all as specified and directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F Extruded aluminium alloy handles, fabricated type, anodised, 150mm, complete all as specified and directed.

S&F Butt hinges 100mm long (type C 21) extruded aluminium alloy, complete all as specified and directed.

S&F Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilation with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle, complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.

S&F of false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-charge.

M&L for colored Non skid ceramic tile 7 t 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor with 15 mm thick screed bed cement mortar 1:6 or bedding layer including dismantling floor heart or wall tiling with cement mortor bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed by Eng-in-charge

M/L for Coloured Glazed ceramic tiles 350 x 250 x 7 mm/450x350x7 thick, set and jointed in neat cement slurry and pointed in white or Coloured cement to match with 10mm thick rendering cement mortar 1:4 including dismantling floor heart or wall tiling with cement mortor bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed by Eng-in-charge

S & F of Pre painted galvalume aluminium zinc coating (PPGL) 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screws including dismantling AC/GI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.

S&F pre painted galvatume aluminium (PPGL) based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling AC/GI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in with 20mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M & L for complete removal of exisiting treatment with sanding machine on wall surface and apply two coat of oil Bond distemper over 1.5 mm thick wall care putty including one alkali resistance priming with mechanical process (Spray painting) complete all as specified.

M&L for Preparing old plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and directed by Eng-in-charge.

M&L for preparation of old steel based paint surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over one coat of red oxide primer complete all as specified and directed by Eng-in-charge.

Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for min Seven days (without any movement). Make : - STP ShaliCryl LM or Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof , FOSROC or SIKA or as equivalent approved by GE. Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) Product should confirm ASTMD-6083 (iv) The work shall be executed through well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE

Taking up or down GI tubing 15/20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.

S&F for CPVC pipes of 20 mm outside dia, SDR 11 and plainf CPVC SDR 11 fittings on walls/ ceiling or laying in wall/ceiling or laying in floors including taking up or down GI tubing 15/20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.

Supply & Fixing 3-layer PP-R Polypropylene random copolymer) of 20 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leak proof including taking up or down GI tubing 15/20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.

Cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc. in Brick walls for bore of pipe 15/20 mm complete all as directed.

Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity( tripple layer wall construction , Cylindrical vertical with closed top) ISI marked hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete, screwed for iron pipes or brass ferrule and fixed, complete all as specified and as directed.

S&F 25 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair pillar taps 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated serewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as directed.

S&F as in repairs, 15mm bore Bib taps long body with wall flange fancy type chromium plated cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule all as specified and directed

S&F two way angle valve with wall flange 15mm bore cast copper alloy chromium plated complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type,low level flushing cistern white complete with in let, ball valve float and handle incl bracket complete all as directed

S&F MS chromium plated soap dish heavy grade fixed to walls with brass screws complete all as specified and directed.

S&F PVC connection pipe 15mm size & 450mm long with chromium plated brass coupling on both ends complete all as directed.

S&F as in repair vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F in repairs Plastic water closet seat cover, coloured , closed pattern with flat bottom, and cover including mild steel chromium plated or aluminium hinging device complete all as directed

S&F in repairs Vitrous china wash down water closet pan ( pedestal pattern ) , white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.

S&F in repairs Virrous china squating pan 'Orrisa' pattern long pan size 580x 440 mm , white with foot rest (excluding flushing cistern and flush pipe) but including cast iron trap and making good to floor complete all as specified and directed.

S&F as in repair concealed stop cock with long shank and sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and directed.

S&F in repairs CP waste coupling 32mm (half or full thread) complete all as specified and directed

M&L Grating doom 100mm dia of PTMT ( Minimum weight 25gm ) complete all as specified and directed

S&F in repairs cast iron floor trap with grating including jointing to wate pipe fixed in cement concrete type B-1 (1:2:4) in 75mm bore dia, complete all as specified and directed

M&L cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in surface channel and saucer drain etc complete all as specified and directed.

Extra for forming fair finished of drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed.

M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 including taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only water proofing compound.

M&L for rendering 10mm thick on brick or concrete surface of wall/ceiling in cement mortor 1:4surface finished even and smooth without using extra cement including taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 1.5 mm thick wall care putty on wall complete all as specified and as directed.

M & L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M&L for Preparing old plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed.

Material and labour for complete removal with mechanical process & preparation of old decorative surfaces of walls, washing rubbing down and stopping of distempered of existing old treatment of wall and applying 1.5mm thick wall care putty and two coat of weather proof exterior emulation (APEX of Asian paint or equivalent) upto three story building, complete all as specified and directed. Note- 1) All painting will be done through mechanical process(Spray Painting) masking and cleaning of floor,door,windows etc during spray painting. 2) The rate shall be inclusive of Scaffolding

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including taking down PVC eave gutter and rain water pipe/waste water pipe (any size or description) including all fixtures, heads, shoes, bends, swan necks, etc including stacked at site and also removal from site

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including taking down PVC eave gutter and rain water pipe/waste water pipe (any size or description) including all fixtures, heads, shoes, bends, swan necks, etc including stacked at site and also removal from site

S&F 110mm bore PVC (SWR) bends any radius with access door

S&F bands, straps, supports or stays for rainwater, large hasp and staple, chains, clamps, hold fasts, wall ties etc and small articles confirming to Fe 290 Gde-E-165, complete all as specified and as directed.

S&F in repairs Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc.complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C1 (Using 20 mm graded stone aggregate) as in plinth protection finishd even and smooth with out using extra cement.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed by Engr-in-charge

Material and labour for point wiring for the One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed.

All as per serial item No 70 here in before but for one 3 pin 5 Amp socket outlet on same board.

All as per serial item No 70 here in before butusing 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15 A socket on independent board, complete all as specified and directed by Engr-in-charge.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed/directed.

Supply and fixing of one 3 pin socket outlet, 5 Amps on the same board with other switches, with cable 1.5 sqmm size, complete all as specified/ directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board, complete all as specified directed.

Material and labour for ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block, 6A, Pilot 2 Plate, complete all as specified and directed by Engr-in-charge

Material and labour for bulb holder angular PVC/Polycarbonate suitable for batten fitting with 9 Watt (warm white), complete all as specified and directed by Engr-in-charge

Supply and fixing of LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: Havell's Cat Part No: REGALBATTENT5UPTO1X18WDSBSWH for batten and TITANIANEO1213T8SSTL18WLED865SPC for tube light, HPL Cat part No: HPLEDT8 PC18(CW) for batten and HPLT81418PC(CW) for tube light, Crompton Cat part No: DIJB12LT8-20 for batten and LT8-13-865-(3) for tube light or its equivalent in Philips/Jaquar

Supply and fixing of wall mounted LED batten mirror light with polycarbonate housing and integarted electronic drive of capacity 7 W, complete all as specified and directed by Engr-in-charge

Schedule of Credit

M/s Jaiswal and Co

M/S N K associates