Flood Protection Works in Right Bank of Pennaiyar river at Kandarakottai and Melkumaramangalam Villages in Panruti Taluk of Cuddalore District.

Amount

Clearing scrub jungle etc, complete complying with standard specifications and as directed by the departmental officers

Dismantling and clearing away for any thickness of wall complete complying with standard specification and as directed by the departmental officers..plain cement concrete

Earth work excavation in all soils except hard rock requiring blasting and conveying for formation of bund with lead 5 Km by deploying earth moving machineries and tippers including benching formation of bunds, breaking clods, ramming, sectioning with extra watering and consolidation by power roller and including hire charges etc. complete complying with standard specifications and as directed by the departmental officers

Earth Work Excavation for foundation in all soils and sub soils to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers. (Open excavation)

Earth Work Excavation for foundation in all soils and sub soils to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers. (Narrow excavation)

Providing and placing in position of plain cement concrete M10 grade using sand graded hard blue granite broken stone jelly of 40 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

For works above 4.50m to 9.00 m below ground level

Providing and placing in position of plain cement concrete M 20 grade using sand graded hard blue granite broken stone jelly of 60% of 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers oincluding the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

For works above 1.50m to 4.50m below ground level

For works upto 1.50m depth below ground level and upto 1.00m height above ground level

For works above 1.00m to 4.50m height above ground level

For works above 4.50m to 9.00m height above ground level

Providing and placing in position of plain cement concrete M 15 using sand hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

For works above 1.50m to 4.50m below ground level

For works upto 1.50m depth below ground level and upto 1.00m height above ground level

Providing and placing in position of Reinforced Cement Concrete M20 using sand hard blue granite broken stone jelly of 20 mm size mixing with mixer machine and laying in layers of not exceeding 15 cm thick excluding form works, centring, shuttering and steel fabrications including laying, compacting, consolidation by using vibrators, finishing, watering, curing, etc complete complying with standard specifications and as directed by the departmental officers

For works above 1.00m to 4.50m height above ground level

Supplying and laying of ready mix for M 25 grade of concrete having charaterstic strength not less than specified in the IS 456 - 2000 using Ordinary portland cement with minimum cement content of 300 Kg / cum confirming to IS 8112. Coarse aggregates having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without flyash as per IS 383 - 1970 ( 2007 ) with suitable water cement ratio not less than 0.45 and not exceeding 0.50 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all locations and levels with specified high workability as per IS 1199 - 1959 ( 2004 ). The initial & final setting time confirming IS 12269 - 1987 ( 2004 ) with maximum temperature of concrete at the time of placing should not exceed 32 0 C. The admixtures affecting the quality and strength of the concrete should not be used and should confirm IS 9103 - 1979 [ usual admixture - Air entraining & water reducing ]. including the cost of hire charges for pump and pumping charges to the required locations & levels as specified by the Engineer - in - charge,. laying, compacting, consolidation by using vibrators, finishing, watering, curing, testing charges as per IS 456 - 2000, 4031 - ( Part 3 & 6 ) / 1988 ( 2005 ) & ( Part 2 ) / 1999 ( 2004 ) and 516 / 1959 ( 2004 ), 4926 - 1976 ( 1990 ), mix design details to be got approved before commencement of the work adopting pour card system and other OK cards. Excluding the cost of form works, centering and shuttering placed in position etc, complete complying with standard specifications and as directed by the departmental officers. (RCC work)

Providing launching apron using new jeddy stone of size not less than 300 mm thick and weight not less than 40 Kg including the cost of new wedges for filling the gaps, finishing etc complete complying with standard specifications and as directed by the departmental officers

Supplying and laying with graded hard blue granite broken stone jelly of varying of size from 80 mm, 63 mm, 50 mm, 40 mm, 25 mm, 20 mm, 12 mm and 10 mm in equal proportions for formation of filter drains and filter bed as shown in drawing etc complete complying with standard specifications and as directed by the departmental officers

Supplying and filling with clean river Sand in layers of not more than 15 cm thick, well watered, rammed and consolidated etc., complete complying with standard specifications and as directed by the departmental officers

Gravel packing in gaps between cement concrete blocks including cost of gravel and filling charges to full depth and stacking for premeasurements etc complete complying with standard specifications and as directed by the departmental officers

Supplying and spreading sand gravel mix ratio of 30:70 for 10 cm thick over the top of bund and other places as required at site of work including watering and consolidation using power roller, etc, complete complying with standard specifications and as directed by the departmental officers

Supplying and erecting centering for vertical plain / RCC concrete walls of supply channel, retaining wall etc for following height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers

Vertical centering- Upto 0.90 M Height

Upto 1.80 M Height

Upto 2.70/3.00 M Height

3.00 to 4.00 M Height

4.00 to 5.00 M Height

5.00 to 6.00 M Height

6.00 to 7.00 M Height

7.00 to 8.00 M Height

Supplying and erecting centering for sides and soffits and strutting follows height for plane surfaces such as RCC works etc, with all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 10 cm x 6.5 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, and removing the same without any damages etc., complete complying with standard specifications and as directed by the departmental officers

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and placing in position of plain cement concrete blocks of size 1.50x1.50x0.90m of M 15 grade concrete using M sand and hard blue granite broken stone jelly of size 20 mm mixing with mixer machine and laying in rows wherever necessary, compacting, consolidation by using vibrators, finishing, watering, curing including the cost of erecting and centering including necessary support for plain surfaceses for concrete block of size 1.50 m X 1.50 m X 0.90 m using MS sheets of size 1.50 m X 0.90 m of 10 gauge stiffened with MS angle of size ISS 25 mm X 25 mm X 3 mm supported by MS flats of size 25 mm X 3 mm, conveyance to site with all labour charges etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete

Supplying and laying porous concrete plugs of 1:4 mix ( one cement and four jelly ) using hard blue granite broken stone jelly of size 20 mm for 10 cm dia, 30 cm long including mixing, laying, finishing, curing, etc., complete complying with standard specifications and as directed by the departmental officers

Dewatering using 7.5 HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.

Providing and placing in position of wheep holes for retaining wall using 110 mm dia / 4Kg PVC pipe heavy duty (PVC) including cost of all metrails, labour charges etc complete complying with standard specifications and as directed by the departmental officers.

Regrading the river bed including jungle clearance deploying the heavy machinery on hour basis including cost of hire charges, fuel, labour etc complete compyling with standard specifications and as directed by epartmental officers( D-80-A12)

Fabricating, supplying and fixing of 80mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete

Supplying and fixing of Head Set Assembly Heavy duty with hexagonal nut (Approximate 120 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required rust free bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section Store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc, complete.

GST 18 % in Figures

srinivasa construction (BID ID -1541878)