REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION WIRINGS INCLUDING FITTINGS and FIXTURES AND REPAIRS TO FANS IN CERTAIN BUILDINGS AT AFS SALUA UNDER GE (AF) KALAIKUNDA

Amount

Taking down carefully (copper/aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators sub main wiring, light fittings etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Taking down carefully copper/ aluminium submain wirings of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc., complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) (HR&FR) as per IS 694: 2010 PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including 25mm wide double locking type PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) (HR&FR) PVC as per IS 694: 2010 insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for :-Note : Wiring to be done as per approved IE rules colour code.

One light/fan point controlled by one switch

One bell point controlled by one switch

One 3 Pin 5 Amps socket outlet independent

One 3 Pin 5 Amps socket outlet on the same board with other switch

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) (HR&FR) PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switch socket outlet etc and including 2.50 Sq. mm (nominal area) (HR&FR) PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 Pin 15 Amps socket out let independent, complete all as specified and directed.(i)Wiring to be done as per aproved colour code.

M & L for concealed point wiring with and including single core PVC insulated, unsheathed flexible conductor (HR&FR) cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor (HR&FR) cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: (i) The chases in the wall shall be cut with elect cutter and rates of the same will deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule.

One light/fan point controlled by one switch

One 3 Pin 5 Amps socket outlet independent

One 3 Pin 5 Amps socket outlet on the same board with other switch

One bell buzzer point controlled by one switch

Materials and Labour for concealed type point wiring with 2.5 Sq. mm (nominal area) (HR&FR) as per IS 694: 2010, ISI marked PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn in and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switch socket outlet etc and including 2.50 Sq. mm (nominal area) (HR&FR) PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 Pin 15 Amps socket out let independent, complete all as specified and directed.(Note: (i) The chases in the wall shall be cut with elect cutter and rates of the same will deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor (HR&FR) cable of 4.0 Sqmm as per IS 694: 2010, ISI marked (with colour code), drawn in but including PVC casing caping not less than 25 mm width, ISI marked, double locking type including one run of PVC insulated unsheathed, multistranded copper conductor (HR&FR) cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface complete all as specified and directed .

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor (HR&FR) cable of 6.0 Sqmm as per IS 694: 2010, ISI marked (with colour code), drawn in but including PVC casing caping not less than 25 mm width, ISI marked, double locking type including one run of PVC insulated unsheathed, multistranded copper conductor (HR&FR) cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surfaces complete all as specified and directed

Supply and fix switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and fix Polycarbonate angular lamp holder with back plate, complete all as specified and directed.

Supply and Fix,switch socket combination 2 in 1, 5A,flush type, complete all as specified and directed.

Supply and Fix,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and fix Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

S&F, bell electric, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

Supply and fix ,bell push, flush type, single pole, 5 Amps, complete all as specified and directed.

Supply and Fix , Modular Switch, one way, 6 Amps, 1 Module, complete all as specified and directed.

Supply and Fix , Modular Switch, one way, 16 Amps, 1 Module, complete all as specified and directed.

Supply and Fix Modular Bell Push, 6 Amps, 1 Module, complete all as specified and directed.

S & F modular socket outlet, 6Amps, 2 and 3 pin combined two modules complete all as specified.

S & F modular socket outlet, 6Amps/ 16 Amps, 2 and 3 pin combined two modules complete all as specified.

S&F Modular switch socket combination 16 A 6 pin, 3 module complete all as specified.

Supply and Fix , Modular Fan step regulator, 120W - 2 module,complete all as specified and directed.

Supply and Fix in repair , Modular Fan step regulator, 120W - 2 module,complete all as specified and directed.

S & F LED bulkhead light with pressure die-cast housing light fittings nominal power 12 watt LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts. frequency of 50 Hz, lumen output of minimum 1100, lumen , , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 3 KV, protection grade IP 65, CRI greater than 80%, THD below or less than 15%, CW available CCT of 6500K, power factor of minimum 0.95 polycarbonate housing with aluminium, life span of minimum 50000 working hours as per catalogue No. CENTURY - HWAR012C OR equivalent of CG/Philip/Wipro complete all as specified and as directed.

S & F in repair LED tube lamp nominal power 20 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts. frequency of 50 Hz, lumen output of minimum 2100Lumen efficacy of minimum 110 lumens per watt, integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 3 KV, protection grade IP 20, CRI greater than 80%, bema angle of 1200 clear, THD below or less than 15%, CW available CCT of 6500K, power factor of minimum 0.95 life span of minimum 50000 working hours as per Make :- Century . : Make : Century Cat No. TWPP020C (retrofit LED tube lamp 20 Watt, Single end connection) OR CROMPTON Make : Crompton Cat No. LTT8-20 LED (retrofit LED tube lamp 20 Watt with AL Heat sink),) OR equivalent of Philips/ Wipro complete all as specified and as directed.

S&F in repair LED 10 Watt tube light fitting intergated type, 240 v, PF > 0.90, colour Temp 6500 K, suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :- Century Model No. BWUL010C or CG/Philip/Wipro as approved by GE.

S&F in repair Coffer tube holder for T8 Tubes 4 ft 20/18 W complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :- Century CG/Philip/Wipro as approved by GE.

S & F in repair retro fit PLL type 4 pin LINEAR LED LAMP nominal power 18 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts. frequency of 50 Hz, lumen output of minimum 1800Lumen efficacy of minimum 110 lumens per watt, with output short circuit protection and surge protection upto 3 KV, protection grade IP 20, CRI greater than 80%, available CCT of 6500K, life span of minimum 50000 working hours as per Make :- Century . : Make : Century Cat No. LULN018C equivalent of Philips/ Wipro/CROMPTON complete all as specified and as directed.

Taking down existing unserviceable light fitting any type (600 mm x 600 mm) recess mounting/surface and S&F LED light fitting 36 watt recess mounting of size 600 mm x 600 mm , white powder coated CRCA housing with LEDs, seam less front frame with flat white high transmission diffisuer, classic design with glare free soft illumination, cool white,including making electric connection from source with PVC sheathed copper conductor wire complete all as specified and directed. . Make : Century Cat No. PCA C 036C or equivalent in CG/Philip/Wipro

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral, fixed in repairs including blanking plate , complete all as specified and directed. [Cat No. 5076 10 of Make Legrand or equivalent Model of Make L&T/ Seimens]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated bus bar, Single Pole & Neutral, fixed in repairs including blanking plate , complete all as specified and directed. [Cat No. 5076 11 of Make Legrand or equivalent Model of Make L&T/ Seimens]

Supply and Fix, Single door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 2 way, with 200 Amps rated bus bar, Single Pole & Neutral, including dismantling taking down unserv. DB complete all as specified and directed Make L&T or equivalent Model of Make Legrand/Siemens]

S&F in repair of Distribution board (DB) double door made out of sheet metal enclosure (CRCA sheet), IK09 , dust and vermin proof, V TPN 4 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 415 volts, incluiding Moulded Case Circuit Breakers (MCCBs), AC 415V, 4 pole, with current rating 100 Amps and 25 KA breaking capacity, Ics=100%Icu, with thermal setting adjustable – 0.8 to 1In & magneticsetting fixed 10In, complete used as incommer Double door, flush to wall including making good as per existing specification complete all as specified & directed.

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 415 Volts, 4 way, with 200 Amps rated bus bar, Triple Pole & Neutral, including dismantling taking down unserv. DB complete all as specified and directed [Cat No.DBTPE004DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) Single pole and neutral, 240 Volts, 10KA, 63 Amps C-curve ,as per IS 60898-1 2002 complete all as specified and directed.

Supply and fix in repair miniature circuit breaker (MCBs) single pole & neutral, 240 Volts, 10KA, 40 Amps,C-curve complete all as specified and directed. [Cat No. 4086 18 of Make Legrand or equivalent Model of Make L&T/ Seimens]

Supply and fix in repair miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 63 Amps,C-curve complete all as specified and directed. Make Legrand/ L&T/ Seimens]

Supply and fix in repair miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 40 Amps,C-curve complete all as specified and directed. Make Legrand/ L&T/ Seimens]

Supply and Fix, miniature circuit breaker (MCBs), single pole, 240 Volts,10KA,,C-curve 6-32 Amps complete all as specified and directed.

Supply and Fix, miniature circuit breaker (MCBs), single pole, 240 Volts,10KA,,C-curve 63 Amps complete all as specified and directed.

S & F in repair single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T.

Taking down carefully ceiling fan 1200 mm/1400 mm sweep,dismantaling of parts,cleaning internally and externally, lubrication of bearing / bushes using fresh lubricant as per OEMs reccommendations, replacement of defective parts,re-assembling, hanging in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares for replacement will be measured and paid separately.

Taking down carefully exhaust fan 250 mm/300 mm /380mm/ 450 mm size,dismantaling of parts,cleaning internally and externally, lubrication of bearing / bushes using fresh lubricant as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares for replacement will be measured and paid separately.

Taking down carefully wall fan 300 mm /450mm size,dismantaling of parts,cleaning internally and externally, lubrication of bearing / bushes using fresh lubricant as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares for replacement will be measured and paid separately.

Taking down carefully pedastal fan any size,dismantaling of parts,cleaning internally and externally, lubrication of bearing / bushes using fresh lubricant as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares for replacement will be measured and paid separately.

Taking down carefully ceiling fan 1200 mm sweep, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, hanging in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, , down rod,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully ceiling fan 1400 mm sweep, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, hanging in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, , down rod,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully exhaust fan 250 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size as per OEMS specfications including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, ,,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully exhaust fan 300 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, , down rod,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully exhaust fan 380 mm/450 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, , ,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully wall fan 300 mm/450 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and flexible copper connection wire, , ,Bearings, clamps) for replacement will be measured and paid separately.

Taking down carefully pedastal fan any size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Spares ( condenser and, ,Bearings, ) for replacement will be measured and paid separately.

M&L for lathe work for proper filling/fixing of bearing/bushes in the top cover of the fan by filling a layer of matter after blazing & bottom cover of fan through authorised technicians of the OEMs as approved by GE complete all as specified and directed.

Materials and labour flexible twin core copper cable of size 23/0.0076 complete all as specified

Supply only chrome Steel Ball Bearing, size 6201/6202 suitable for ceiling fans 1200 mm/1400 mm/ 1500 mm sweep as per OEMs specifications, complete.

Supply only chrome Steel Ball Bearing, size 6203 suitable for ceiling fans 1200 mm/1400 mm/ 1500 mm as per OEMs specifications, complete.

Supply only Gun Metal Bushing/Sleeve Bearing of suitable for shaft size suitable for ceiling fans 1200 mm/1400 mm/ 1500 mm sweep as per OEMs specifications, complete.

Supply only, chrome steel exhaust fan ball bearings, size 6001/6002 as per OEMs specifications, complete. (Make: TATA/NBC/SKF)

Supply only Shackle type rubber reel,'U' clamps, bolts,split pin & washer as per OEMs specifications, complete.

Supply only,Capacitors for electric fan motors, 2.5 mfd, 220 V conforming to IS:1709 (Cat No. QHPCWC5002X5 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS or as per OEMs specifications, complete.)

Supply only Capacitors for electric fan motors,3.15/4.00 mfd conforming to IS: 1709 (Cat No. QHPCWC5003X1 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS)or as per OEMs specifications, complete.)

Supply only, Down rod with splitted ends and fixing/hanging arrangement with clamps,nuts, bolts, washer and split pins.as per OEMs specifications, complete.)

Supply only Fan blades suitable for 1200 mm sweep fan as per OEMs specifications, complete.)

Supply only Fan blades suitable for 1400 mm sweep fan as per OEMs specifications, complete.)

Supply only Exhaust fan blade of 450/380 mm sweep complete as per OEMs specifications, complete.)

Supply only Exhaust fan blade of 300/250 mm sweep complete as per OEMs specifications, complete.)

Supply only wall mounting fan blade of 300/450 mm sweep complete as per OEMs specifications, complete.)

Supply only Oscalating mechanism suitable for wall mounting fan of 300/450 mm sweep complete as per OEMs specifications, complete.)

Supply only heating element of geyser any type (i.e; Cup,thread or triangular) as per existing sample 1.5 KW, 220/230 volts ISI marked as per OEMs specifications, complete.)

Supply only heating element of geyser any type (i.e; Cup,thread or triangular) as per existing sample 2.0 KW, 220/230 volts ISI marked as per OEMs specifications, complete.)

Supply only Thermostat, stem type, adjustable upto 75 Degree Celcius, ISI Marked (IS 3017).as per OEMs specifications, complete.)

S&F in repair single phase direct connection type KWH meter , temper proof, plastic body with LCD display, 230/240V, 10-30 Amp, accuracy class I, 50 Hz, Conforming to IS 13779, IP 54, with ( parameters to show Date, time, current reading, KW, PF) in existing position by providing Polycarbonate box cover, including making complete electric connections complete all specifed and directed Make : Secure (Model Saral) or eqivelent in L&T Note : Old meter to be deposite in AGE E/M store.

Guru Charan Mahata

M/S Jamuna Traders

VICKY ENTERPRISE

SUMAN CONSTRUCTION

CLASSIC CONSTRUCTION AND SUPPLIERS

SG ENTERPRISE

M/S OM BUILDERS