Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.8 L+₹4.8 L (32.4%)Rejected-AOC 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L2 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (AF) SHILLONG
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
CA NO GE(I)(AF)/SHL/ OF 2022-23 REPAIR TO DRAINS, HARD STANDING, INTERLOCKING TILES, CHEQUERED TILES, CULVERT, RETAINING
2023_MES_574376_1
8065/22/SHL/2022/23
Open Tender
Civil Works
Item Rate
180 days
LAITKOR PEAK SHILLONG
For Enlisted Contractors Class E Category a i and for unenlisted contractors meeting enlistment criteria for required Class and Category
8 documents required · 8 mandatory
₹500
GE (I) (AF) SHILLONG
₹40,000
Yes
9 Mar 2023
11 Jan 2023
11 Feb 2023
11 Jan 2023
9 Feb 2023
23 Jan 2023
11 Jan 2023 - 20 Jan 2023
Amount
Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same.
Excavation in post holes (or similar holes) each not exc 0.50 Cum getting out returning filling in rammingearth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance of not exc 50M and making good the entire areas as directed.
Dismantling posts or structs (wood, steel or RCC) any section including taking out embeded portion and making good distrubed concrete ground all as directed.
M & L for providing precast reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area not exc 100 Sqcm with or without chamfered.
M & L for mild steel deformed bars 10mm dia and over cut to length, bent to shape required including binding with and including mild steel wire (annealed) not less than 0.90mm dia all as specified and directed.
All as per item 4 hereinbefore, but 5mm dia and over upto and including 10mm dia as in stirrups, spacersand binders all as specified and directed.
M & L for PCC 1:4:8 typeD2 using 40 mm graded stone aggregate as in foundatio, filling and mass concrete all as specified and directed.
Supply and fixing in angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire incl all necessary drilling bolts or rivetting & similar work confirming to Fe-410-0 or Fe 310-0 and flat iron 40x4mm fillets (for securing chain link fencing etc) complete all as specified and as directed by Engineer-in-Charge.
Dismantling fencing wire mesh any type all as directed.
Supply only chain link MS galvanised fencing any size or type.
Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire all as specified and directed.
Supply and fix mild steel flat iron fillets (for securing wire mesh etc) including bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 and steel bars for tightening the fencing all as specified and as directed.
Supply and fix mild steel screw bolts of 5 to 10mm dia of Shank (machine made) with hexagonal or square heads at one end and scewed the other each scewed the other each screwed ended to be fitted with washers and one hexagoal or square nut, exceeding 10cm and not exceeding 15cm.
Demolition of cement concrete of any description in any position all as directed.
Material and labour 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded mechanically crushed stone aggregate) as in path, pavings, etc. finished even and smooth using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour machine pressed precast concrete interlocking paver block with grey cement and pigment of design of existing pattern conforming to IS 15658-2006 of 80mm thickness M-40 grade crushing strength not less than 250kg/sqm laid over 25mm thick sand cushioning layer.
All as per item No.15 above but except tiles.
Material and labour PCC 1:2:4 Type B-1 (using 20mm graded mechanically crushed stone aggregate) as in bonding/locking of edges of interlocking tiles including weathering and slightly rounded or chamfered on edges and threating including necessary form work complete all as sppecified and as directed by Engineer-in-Charge.
S & F in repairs galvanized 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75 mm spacings and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pins incl dismanting of barbed wire etc all as directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate 75mm thick in sub base of floor all as specified and directed.
M & L 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement all as specified and directed.
M/L forming 12mm thick expansion joints filling with pre-formed bituminous fillters and top 30mm primed and sealed with sealing compound grade B
Demolition of brick work/stone boulder built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings, dressed sone work and pre cast concrete articles as directed.
M & L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in beds of surface m channels & drains including smooth finish complete all as specified and directed.
M & L Precast cement concrete block C1, 1:3:6 (20mm aggregate) set in cement mortal 1:6 complete.
M & L rendering 15mm thick on other than fair faces of brick work or concrete inner surfaces of drain in cement mortar 1:4 and finished the surfaces fair and even smooth without using extra cement as specified and directed.
M & L continous brick edging with width equal to the length of the old size brick laid dry, on edge complete all as specified and as directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in coping kerbs, benching and bed block etc incl necessary form work all as specified and directed.
Demotion of Reinforced cement concrete of any type all as specified
M & L for RCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in precast manhole covers, septic tank etc and set in cement mortar 1:4 complete all as specified and directed.
M & L for mild steel TMT bars 8mm to 10mm dia cut to length bend to shape required incl cranking bending and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed.
Material and labour for preparing surfaces of new/ previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete as specified.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed by Engineer-in-charge.
Suply and fixing MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge.
M & L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete surfaces complete all as specified in SSR Part-I clause 14.22 complete all as specified and as directed Note: Rough cast finish shall be made as under: (i) After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel/ aggregates (of size between 6 to 12mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are throughly covered.
M & L Chequered cement concrete prepolished colour tiles 20 cm x 20 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floor using grey cement with pigment including 20mm thick screed bedding in CM 1:6 over and 75 mm thick cement concrete type D-2, 1:4:8 using 40 mm graded aggregate complete all as specified and directed.
M & L Rendering 15mm thick cement plaster (1:4) on fair faces of concrete surfaces finished even and smooth without using extra lime or cement (externally) complete all as specified and as directed complete
M & L preparation of new or previously treated plastered/ concrete wall surfaces, etc. and applying two coats of 100% exterior acrylic emulsion painting having VOC less than 50 Gm/litre and UV resistance as per IS-15489-2004, Alkali and Fungal resistance, dirt resistance exterior paint of required paint with silicon additives @ 1.43 Litre/10sqm over and including priming coat of exterior primer applied @0.90 liter/ 10 sqm over new surfaces complete.
M/S RAGHU NATH SAH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .