Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC AOC | |
| 2 | L2₹37.5 L+₹2.7 L (7.87%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹42.9 L+₹8.1 L (23.4%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹42.9 L+₹8.2 L (23.5%)Rejected-Finance WARD NO 26 RCP TALL COLONY SURATGARH 335804 | GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyesh Srivastava
GE (AF) SURATGARH
PETTY REPAIR IN ZONE B AND REPAIR TO ROOFING , CHAJJA REPAIRS AND ALLIED WORK IN ZONE A OF TECHNICAL AREA AT AF STN SURATGARH
2023_MES_593763_1
8034/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹90,000
Yes
24 Jun 2023
8 May 2023
7 Jun 2023
8 May 2023
5 Jun 2023
22 May 2023
Amount
BOQ (PETTY REPAIR IN ZONE B AND REPAIR TO ROOFING , CHAJJA REPAIRS AND ALLIED WORK IN ZONE A OF TECHNICAL AREA AT AF STN SURATGARH)
M&L for petty repairs to leaking in bib taps, pillar taps, stop cocks, angle valves and low level flushing cistern etc of any description including changing the washer etc, complete all as specified and directed.
Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore cleaning the pipe or fittings etc and refixing in the same position, complete all as specified and directed
Petty repairs to leakage in by refixing/resecuring in GI / CI pipes etc of any bore, complete all as specified and directed
M&L CP cast copper alloy bib taps with wall flange type of 15 mm bore quarter turn fixed in repair, complete all as specified and directed
M&L CP Fancy type Pillar cock 15mm bore cast copper alloy with capstan heads rocket type with areator fixed in repair, complete all as specified and directed
S&F in repairs 15mm bore of pipe Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), complete all as specified and directed
S&F in replacement of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend (L bend) pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed
S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified and directed
S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms), complete all as specified and directed
S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
S&F soap dish chromium plated , complete all as specified and directed.
S&F in repairs bras chromium plated tubular towel rail 20mm dia D type, 600 mm long between flanges, complete all as specified and directed.
S& F in repair CP concealed stop Cock fancy type/ angle stop cock screwed both end for iron pipe 15 mm bore, complete all as specified and directed.
S& F in repair Chromium plated Overhead Rain shower rose in square pattern of size 200mmx 200mm with revolving joint and shower arm with wall flange 15 mm bore fancy type any colour and, complete all as specified and directed.
M&L in repair 15mm bore angular Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F in repairs CP grating with or without hole 100/125 mm dia round fix on floor / nahani trap , complete all as specified and directed.
S&F, Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge.
S& F as in repairs PVC in connection 15mm dia 60cm long with 2 Nos PVC check nuts with washer complete all as specified.
S&F in repairs flush pipe of polythylene of low or high density of PVC 32 mm dia for low level cistern including all joints , complete all as specified and directed.
S & F in repairs internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 9/10 Ltr, complete all as specified and directed.
S& F in repairs PVC handle incl lever arm assembly for PVC Low level flushing cistern completee all as specified and directed.
S& F in repairs 32mm dia PVC waste pipe flexible type for WHB or sink 90cm long with unioncompletee all as specified and directed.
S& F in repairs waste fittings brass chromium plated 32mm dia, completee all as specified and directed.
Taking up or down 15mm steel water tubing and connection incl cleaning for refixing or removal to stores, complete all as specified and directed.
Taking up or down 20mm steel water tubing and connection incl cleaning for refixing or removal to stores complete all as specified and directed.
S&F 15mm bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F 20mm bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S& F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple up to size 200 mm , tee etc for 15mm bore pipe including opening the connected pipe and refixing in the same location, complete all as specified and directed.
S& F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple up to size 200 mm , tee etc for 20mm bore pipe including opening the connected pipe and refixing in the same location, complete all as specified and directed.
S&F in repairs GI Tank connection Nipple 15 mm bore 75mm long complete all as specified and directed.
S& F in repairs GI union 15 mm bore (with or without replacement) complete all as specified and directed.
S& F in repairs GI Tank connection Nipple 20/25 mm bore 75mm long complete all as specified and directed.
S& F in repairs GI union 20 mm bore (with or without replacement) complete all as specified and directed.
S& F in repairs PVC sintex water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks complete all as specified and directed.
S& F in repair 25mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe including opening the GI pipe and resecuring the GI pipe in the the same location. (no separate measurements for refixing of pipe will be given) complete all as specified and directed.
Dismantling existing water tank of capacity exc 250 and n exc 500 ltrs capacity and removing to store complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs complete all as specified and directed.
Dismantling existing water storage tanks exc 500 litres but n.exc 1000 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge.
S&F, Rotational moulded PVC, triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 250 to 500 ltrs capacity of tanks as directed by Eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning)
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 500 but n exc 1000 ltrs capacity of tanks as directed by Eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning)
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore complete all as specified and directed by Engineer-in-Charge.
S& F as in repair PVC (SWR) bend of any radius of 110mm bore complete all as specified and directed by Engineer-in-Charge.
S&F Vitreous China Squatting pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repair complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of urinal partition of vitreous china white colour of size 310x 700mm, with and including all fitings and accessories, duly fixed to walls, complete all as specified and directed by Engineer-in-Charge.
S&F Vitreous China wash down water closed pan (Pedestal pattern) white , including connection to drain(or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.
S&F in repairs plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.
S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair of stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug, waste pipe, washers, including mild steel brackets, connecting union etc to pipe,overall size 495 x 420mm bowl size 410mm x 330mm x 160mm etc, complete all as specified and directed by Engineer-in-Charge.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F of cantilever bracket for sink or wash hand basin complete all as specified and directed by Engineer-in-Charge.
Easing of door/windows (Complete for one no of door or window) shutters of any size/any number of panels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of lower bolts, Sliding bolts etc complete all as directed.
S&F stainless steel peg set of five/Six complete all as specified and directed by Engineer-in-Charge.
S&F in repair Stainless steel plate rack of overall dimension not less than 750mm x 600mm x 250mm, thickness should not be less than 0.50mm complete all as specified and directed by Engineer-in-Charge.
Repairs and resecuring to cup boards including easing of CB shutters, tightning of hinges or handles/knobs hasp and staple etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs aluminium handle,150mm size cast type, anodised, ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F in repairs aluminium tower bolts, 150mm size cast type, anodised, ISI marked, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs of mild steel barrel tower bolt 200 mm long stove enamelled black with bright boltcomplete all as specified and directed by Engineer-in-Charge.
S&F in repairs of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple platecomplete all as specified and directed by Engineer-in-Charge.
Welding in any situation and in any floor butt hinges 100 mm medium weight to chowkhat after taking down shutters and refixing in position the same and making functional complete all as specified and directed by Engineer-in-Charge.
S&F in repairs butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed by Engineer-in-Charge.
Welding in any situation and in any floor Mild steel body single action door spring hinge size 100 mm including taking down door of any size and refixing in same opening complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm size Extruded alumium alloy handles, fabricated type polished, complete all as specified and directed by Engineer-in-Charge.
S&F in repair aluminium door stopper, complete all as specified and directed by Engineer-in-Charge.
Taking down of existing PVC Door shutter & refixing in the same opening after necessary repairs like tightening of cleats , repairs to hinges , governing pivots etc all as directed to obtain smooth opening /closing operation , complete all as specified and directed by Engineer-in-Charge.
Taking down of existing unsv Seal Door and S&F 4mm thick and 75mm width rubber door seal, complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed by Engineer-in-Charge.
S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane, complete all as specified and directed by Engineer-in-Charge.
S&F 200X200 mm high toughned glass corner shelf made of 5mm thick of glass all as per specification and directed by Engineer-in-Charge.
S& F in repair Stainless steel chromium plated curtain rail 25mm dia, with & including fixing brackets, knobs and wall side ,stops, rollers etc complete all as specified and directed by Engineer –in-Charge.
S & F door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each cast iron body all as specified.
Attending to repair of broken brick/stone wall and ceiling plastering (area of plaster exc 1.0 sqm but n exc 5.0 sqm in each job) to wall etc in Tech area of air force station suratgarh directed by Engieer-in-Charge. Note (i) Any item/material which are required for repair work provided by the contractor like cement,sand, aggregrate and white cement etc shall be deemed to be included in this item only.
S&F 75mm cast iron floor trap, with gratting including jointing to waste pipe fixed in cement concretetype B1(1:2:4), fixed in repair, complete all as specified and directed by Engineer-in-Charge.
M&L machine cut Kota stone 18-20mm thick in patches (each patch area upto 1.0 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20 mm thick for laying of floor finishes in CM 1:6, rubbing and polishing complete (mirror face) , complete all as specified and directed by Engineer-in-Charge.
M & L in repairs non-skid ceramic coloured tiles in patches (each patch area upto 1.0 sqm) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.laid over and including 15 mm tnick cement screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.
M&L in repairs glazed ceramic colour tiles in patches (each patch area upto 1.0 sqm) in vertical surface of size 450 X 300 x 7 mm thick,over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.
M&L in repairs Light coloured vitrified tiles, in patches (each patch area n exc 1.0 sqm) 8 to 10 mm thick (square/rectangular) jointless , area of each tiles exceeding 0.36 sqm but n exc 0.42 Sqm, in floors etc laid over and including 15 mm thick cement screed in CM 1:6, set and jointed, complete all as specified and directed by Engineer-in-Charge.
M&L for two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots, complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed by Engr-in-Charge.
M&L for 1.5 mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.
M&L for painting of treated surfaces to receive two coats of dry distemper on surfaces of walls and ceiling complete all as specified and directed.
M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc complete all as specified and directed by Engineer in Charge.
M&L for painting old steel surfaces exc 10cm width or girth with one coat of synthetic enamel paint of approved tint including preparation of surfaces complete all as specified and directed by Engineer in Charge.
M&L for painting old wooden surfaces exc 10cm width or girth with one coat of synthetic enamel paint of approved tint including preparation of surfaces complete all as specified and directed by Engineer in Charge.
Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in Charge.
M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra complete all as specified and directed by Engineer in Charge.
M&L for two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation over new plastered over a coat of primer surfaces complete all as specified and directed.
Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed.
Designer type gypsum ceiling board / mineral fibre board of size 595 mm x 595 mm x 7-8 mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600 mm, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25 mm x 25 mm x 1.25 mm, hanging arrangements with roof with GI wire not less than 4.00 mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
Easing of window shutters/CB (one unit shall comprise of one complete window/CB/showcase irrespective of number of leafs) to ensure smooth closing /opening tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as directed.
Easing of door shutters (one unit shall comprise of one complete door irrespective of number of leafs) to ensure smooth closing /opening tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as directed.
Easing of aluminium door shutters/CB (one unit shall comprise of one complete door/CB/showcase irrespective of number of leafs) to ensure smooth closing /opening tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as specifed and directed.
Easing of PVC door shutters to ensure smooth closing /opening tightning of hinges or changing the position of hinges adjustments of tower bolts including welding to angle iron chowkhats etc complete all as specifed and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed.
M & L for ceramic joint free non-skid tiles area of tiles exceeding 0.06 sqm but not exceeding 0.11 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement to match the shade over over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M & L for ceramic joint free non-skid tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement to match the shade over over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L Glazed colour joint free ceramic tiles in vertical surface 300mm x 450 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces laid over and including 10 mm thick rendering incement mortar (1:4) all as specified and as directed by Engr-in-Charge
M&L for Vitrified tiles of premium quality, light shade, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in Charge.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish in low lying area, complete all as specified and directed by the Engineer in Charge.
M&L for PCC 1:3:6 type C2 (using 40 mm grade aggregate) 75 mm thick as in plinth protection / paving finished fair and even without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 metres and every changes of direction and filling the same with and including bitumen and sand 1:3 by weight complete with necessary formwork complete all as specified and as directed by Engr-in-Charge.
M&L for 75mm thick cement concrete 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in top surface of hardstanding etc finished even and smooth without using extra cement complete all as specified and directed.
Dismantling of pavers blocks/tiles of any description or thickness in floors, aprons etc. laid dry or laid dry or pointed, complete all as specified and as directed by the Engineer in Charge.
M&L for 75 mm thick PCC 1:4: 8 type D-2 using 40 mm graded stone aggregate as in sub base of floor/tiles etc, complete all as specified and directed.
M & L for Factory made machine pressed precast concrete interlocking paver block any shape or size conforming to IS 15658 of 80 mm thickness M-40 grade with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by the Engineer in Charge.
Fixing only retrieved Machine pressed precast concrete interlocking tiles/paver block any shape and size with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by the Engineer in Charge. Note: Servicable paver block / tiles retrived from serial item No 108.00 above shall be used after proper cleaning and washing of old tiles.
M & L for Factory made machine pressed precast concrete interlocking paver block any shape or size conforming to IS 15658 of 60 mm thickness M-35 grade with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by the Engineer in Charge.
Dismantling plain or corrugated or semi steel sheeting, any gauge, thickness, includidng nainital or similar pattern as in roof covering or wall cladding complete all as specified and directed.
"S&F pre-painted galvalume aluminium zinc coating GI based corrugated or steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for.
S&F Mild steel plates, plain or chequered, 5 mm thick or over in available sizes, Fe 410-W (Gde E-250) quality A all as specified and directed.
S&F steel work in tubular truss /verticle pipe including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st-240 all as specified and directed.
S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other coveriong, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge
Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-Charge
M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.
S&F 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site, complete all as specfied and directed by the Engineer-in-Charge
Dismantling of boarding of any description fixed in any position with nails in CB's loft, showcases, utensil racks etc all as specified.
S&F 19/20mm Pre-laminated board exterior grade both side laminated board fixed with screws as directed by Engineer-in-charge.
S&F, 40 mm width continous (piano) hinges,brass, bright finish or electro galvanised complete all as specified and directed.
Supply & fix magnet catcher suitable for cupboard shutter complete all as specified and directed.
"S & F in repair vitreous china urinals half stall type white with 32 mm bore PVC waste pipe of length 900 mm to 1200 mm including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug, waste coupling and and making good the surface by white cement to match the wall shade complete all as specified and as directed.
M&L for preparing of RCC projection, chajja,roofs, facia etc by necessary preparation i.e scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surface of damaged, fixing of welded wiremess,binding of reinforcement bars with binding wire, removal of loose RCC surfaces and one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 sqm and thickness RCC member n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork , welded wiremesh and reinforcement shall be deemed to be included in unit rate quoted by the contractor.
Rounding toedges of stone slabs one edge such as in steps cooking platform and other similar situation as directed.
S&F floor door stopper 150mm overall length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engr-in-Charge
"S&F in repair Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32 mm dia HDPE waste pipe and including new brackets, complete all as specified and directed by the Engineer in Charge. "
S&F 0.9 mm thick decorative laminate type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per maker's instructions as directed by Engineer-in-charge.
Supply & fix as in repair 18/19 mm thick block boards grade 1 quality exterior grade commerical type fixed with screws to timber framework complete all as specified and directed.
M&L PCC type B1 1:2:4 (using 20mm graded aggregate) 25 mm thick as in floor finished surfaces fair and even to receive tile, complete all as specified and as directed by Engr-in-Charge
M&L for rubber finish Chequered cement concrete tiles 300X300X25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge
M&L providing 2 coats of topcrete /pedicrete /nitobond/(cementious polymer modified compound ) in repairs on surface of any description in any position by mising the chemical in cement slurry 1:1 ratio, complete all as specified and as directed by Engr-in-Charge
Dismantling brick tiles or terracing tiles single layer on roofs complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for wire brushing neat cement slurry with 3kg of cement per sq m at top and bottom of base coat and cleaning top surface complete all as specified and directed.
M & L for PCC padding in 1:2:4 type B-1 (using 20mm graded aggregate ) average 50 mm thick to be provided in slope, complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:4 mixed with WPC over cleaned concrete surfaces (WPC measured and paid separately) complete all as specified and directed.
Supply only integral waterproofing compound .
M&L for fixing mineral finish APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) land on primered surface by forced application and Applying two Coats of aluminium paint over surface of any description complete all as specified and directed.
M&L 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
All as per above item no 146 but except tiles.
M&L flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3 complete all as specified and directed.
M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of white wash to match with the existing surfaces at any height complete all as specified and directed.
. M&L for coloured glazed ceramic tiles of size 300x200x7 mm thick as in vertical surface such as skirting , dado and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge.
. M&L for Vitrified tiles of premium quality, light shade, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sq.m, as in skirting, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in Charge.
S&F Gypsum ceiling board of size 595 mm x 595 mm x 12 mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600 mm, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25 mm x 25 mm x 1.25 mm, hanging arrangements with roof with GI wire not less than 2.00 mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
S&F Fibre insulation ordinary type board 12mm thick of any size (size of board as per site requirement) as in ceiling, fixed with screws on GI grid frame work, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25 mm x 25 mm x 1.25 mm, hanging arrangements with roof with GI wire not less than 2.00 mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
S&F in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position in walls, ceiling and floors etc complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position in walls, ceiling and floors etc complete all as specified and directed.
S&F in repairs, PVC float valve 15mm dia, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed.
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
M/S Shree Ram Enterprises
Bhawani Enterprises
DIKSHA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .