Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC MAYURESH BHARAT CHS PLOT NO 170 181 B 09 SECTOR 21 NERUL NAVI MUMBAI 400706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Quoted rate found reasonable | |
| 2 | L2₹35.3 L+₹52,261.20 (1.50%)Rejected-Finance | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹35.4 L+₹67,826 (1.95%)Rejected-Finance 601 A WING SAI PARAMOUNT APARTMENT SHRADDHA VIHAR COLONY INDIRANAGAR NASHIK NASHIK MAHARASHTRA 422009 | NASHIK | MAHARASHTRA | 422009 | L3 | Rejected-Finance GREATER THAN L1 | |
| 4 | L4₹35.5 L+₹75,656 (2.18%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance GREATER THAN L1 | |
| 5 | L5₹35.5 L+₹76,181.40 (2.19%)Rejected-Finance BHAIRAVNATH NAGAR AT KUSGAON POST LONAVLA 410 401 DISTT PUNE | PUNE | MAHARASHTRA | 410401 | L5 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹34.2 L
EMD Value
₹69,000
Closing Date
14 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Gaurav Tiwari, IDSE, EE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
PROVN OF TECH STORE FOR LOGISTIC SECTION AND RAIN PROTECTION AT CERTAIN BLDG and ADDN /ALTN TO VARIOUS MESSES AT AF STATION LONAVLA
2024_MES_640958_2
GE/LONAVLA/8223/E8
Open Tender
Civil Works
Item Rate
210 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹69,000
Yes
18 Jul 2024
25 May 2024
17 Jun 2024
25 May 2024
14 Jun 2024
8 Jun 2024
25 May 2024 - 7 Jun 2024
Amount
M&L for Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out hard / dense soil complete all as specified and directed by Engr-in-charge
Excavation in trenches n.exc 1.5m wide, & n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-charge
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation and getting out in hard rock complete all as specified and directed by Engr-in-charge
Returning filling in, including, spreading levelling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed by Engr-in-charge
Removing excavated material exc 100 m but n.exc 250 m and depositing where directed as in soils complete all as specified and directed by Engr-in-charge
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed by Engr-in-charge
Plain Cement Concrete Type C2 1:3:6 (using 20 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge
M&L for 75 mm thick PCC (1:3:6) type C 2 (usin 20 mm gradded stone aggregate) as in plinth protection complete all as specified and directed by Engr-in-chargeby Engineer-in-charge.
M & L for RCC M-30 (Nominal mix) for foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed by Engr-in-charge
M&L for RCC M-30 (Nominal Mix) for roof beam supported on walls, beams and lintel above 1.5 m clear span complete all as specified and directed by Engr-in-charge
M&L for RCC M-30 (Nominal Mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like etc complete all as specified and directed by Engr-in-charge
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge
M&L for Formwork to sides of concrete foundations, footings, columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams,lintel beams and similar work vertical or to batter complete all as specified and directed by Engr-in-charge
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips on slab, MH cover etc. complete all as specified and directed by Engr-in-charge and directed by Engineer-in-charge.
All as per item no 14 here-in-before but 8 mm dia bars etc
Demolition of brick work/stone masonry built in cement mortar including all quoins arches, pillars complete all as specified and directed by Engr-in-charge
M&L for pre-cast cement concrete block type B1 1:2:4 masonary with solid blocks, exc. 10 cm in width and setting in CM 1:4 complete all as specified and directed by Engr-in-charge
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete all as specified and directed by Engr-in-charge
Supply for material for Integral waterproofing compound for external plaster complete all as specified and directed by Engr-in-charge
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 25 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed by Engr-in-charge
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge
M&L and Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed by Engr-in-charge
M/L for rendering 10mm thick in cm 1:4 on concrete roof and chajja surface finished even and smooth without using extra cement to get a uniform level surface for laying of membrane treatment complete all as specified and directed by Engr-in-charge
M/L for PCC 1: 2 : 4 type B-1 (using 12.5mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cementcomplete all as specified and directed by Engr-in-charge by Engr-in-Charge.
M/L for applying oil based bituminous primer @ 0.10 Kg/Sqm providing and laying 4mm thick. APP modified water proofing membrane weighing not less than 4kg/sqm re-inforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sqm, tearing strength of 180N and with thermal insulation with the mineral / graved finish on upper side and laying with torches application and with 10 cm minimum lap in both direction length wise and width wisecomplete all as specified and directed by Engr-in-charge by Engr-in-charge.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge
M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/manglore tile roof drops fixed with self tapping screws complete all as specified and directed by Engr-in-charge
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge
S&F trusses (framed), sunshade frames, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W(Gde-E-250)complete all as specified and directed by Engr-in-charge by Eng-in-Charge.
S & F MS steel work in tubular/roof trusses (framed),purlines,rafters etc, complete including nessary cutting, welding,fabrication and eraction Machine hydraulic bending etc complete using ERW pipes or indution butt welded tubes,confirming to IS 1161-1979 (Gde E-250) quality-A, complete all as specified and directed by Engr-in-charge
M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and directed by Engr-in-charge
S&F 10mm dia 100mm long bolt fastner complete all as specified and directed by Engr-in-charge
M&L for framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F Welded steel wire fabric weight not less than 2.5 kg/sqm complete to wood or steel members complete all as specified and directed by Engr-in-charge
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge
M & L for Machine cut kota stone slab flooring 18-20mm thick for floor, window cill, jambs and sofits over and including cement screed base 20 mm thk in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge
Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed by Engr-in-charge
M&L for vertified ceramic tiles 8-10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors, etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, including 15 mm thick screed bed CM 1:6 complete all as specified and directed by Engr-in-charge
M&L for rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed by Engr-in-charge
M&L for vertified ceramic tiles 8-10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.complete all as specified and directed by Engr-in-charge
M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors,vertical surfaces etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed by Engr-in-charge
S&F glazed ceramic coloured tiles (300mmx 450mmx7 -8mm) in vertical surfaces jointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc over 10 mm thick backing coats of cement plaster in CM (1:4) complete all as specified and directed by Engr-in-charge
M&L for preparation of old un-decorated surfaces of walls by applying two coat of acrylic oil emulsion distemper of any tint/shade including a coat of wall care putty to get a even and smooth surfaces of walls complete all as specified and directed by Engr-in-charge
Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and directed by Engr-in-chargeincl stacking the materials properly.
Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to store/sitecomplete all as specified and directed by Engr-in-chargeby EIC.
S&F powder coated aluminium ventilator partly fixed and partly louvered type without sash bar section as per minimum 15 micross anodised including necessary jointing, clip, rubber packing, anodised snap beading crews and 4mm thick pin headed glass complete all as specified and directed by Engr-in-charge
S&F for factory made Solid PVC door frame of size 50mm x 47 mm made out of prelaminated wood grain PVC solid core reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and directed by Engr-in-charge
S&F factory made Solid PVC Double door frame of size 50mm x 95mm made out of prelaminated wood grain PVC solid core reinforced with M.S. tube, supplying & Fixing in opening as directed by EIC.
S&F for 35 mm Factory made Moulded door shutter(Wood grain) consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer's specification & drawing etc, complete all as specified and directed by Engr-in-charge
Ditto all as SI Item No 50 above but wire gauzed i.e pannel will be of wire gauze in lieu of single side prelam PVC sheet pannel. The wire gauze shall be wrapped on an addtional square 8 mm MS solid tube and and this tube shall be welded to MS tubes. The wire shall be streched to tighten firmily complete all as specified and directed by Engr-in-charge
S&F Butt hinges,125mm stainless steel, with stainless steel hinge pin complete all as specified and directed by Engr-in-charge
S&F aluminium handles cast type anodised 150mm size complete all as specified and directed by Engr-in-charge
S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size complete all as specified and directed by Engr-in-charge
S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 300mm length complete all as specified and directed by Engr-in-charge
M&L for machine cut Granite (of any type) tiles 20-25mm thick for kitchen platform over and including bedded and jointed with grey cement slurry/backing coat 15 mm thick in CM (1:4) and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types
M & L for rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity triple layered hoisted and fixed in position including 25mm dia float ball brass valve and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed by Engr-in-charge.
Demolition of reinforced cement Concrete in any description and any position complete all as specified and directed by Engr-in-charge (Old RCC Tank)
Taking up or down steel tubing and connections, 20 mm bore including cleaning for re-fixing or removal to store
Taking up or down steel tubing and connections, 25 mm bore including cleaning for re-fixing or removal to store
Tubes, ‘medium grade’ galvanised, 20 mm bore with concealed all fitting and fixed complete to walls and ceilings or laid in floors
S&F tubes, ‘medium grade’ galvanised, 15 mm bore with concealed all fitting and fixed complete to walls and ceilings or laid in floors
S&F tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors
S&F repairs vitreous china wash down water closet (Padestal pattern) pan white including bolts and flush pipe, pedestal pan and trap including connections to drain (or outgoing pipe) and flushing pipe etc including seat cover closed type complete fixed in repairs.
S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specified and directed by Engr-in-charge.
S&F Vitreous china white flat back of size 580x450mm wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.
S&F Vitreous china white ovel shape counter shank of size 550x400mm wash basins, including cutting of granite, coupling, waste pipe but excluding WHB mixer complete all as specified and directed by Engr-in-charge & directed by Engr-in-Charge.
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60 gms) complete all specified and directed.
S&F in repairs Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortatr 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.
S&F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.
S&F Brass CP central hole basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed.
S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed by Engr-in-charge
S&F Brass CP wall mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed.
S&F toilet paper holder of stainless steel of size 10.5cm X 9cm fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-charge
S&F SS soap dish complete all as specified and directed by Engr-in-charge
S&F acrylic cabinet mirror of size 450mm X600mm fixed with wooden plugs with cromium plated screw and cup washers, complete all as specified and directed by Engr-in-charge and directed, Make shall be of M/s Commander , M/s Jasmine or equivalent.
S&F hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook complete all as specified and directed by Engr-in-charge Cat No:- ALD - 573 of Jaquar or equivalent model Manufactured by Esess/ Marc.
S&F Angle/stop cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge
S&F 20mm dia towel rail chromium plated 60cm long including bracket fixed with stainless screws complete all as specified and directed by Engr-in-charge
S&F chromium plated swivel shower rose 125mm dia along with 150mm arms for fixing with 15mm pipe complete all as specified and directed by Engr-in-charge
S&F PVC (SWR) pipes of dia 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge
S&F PVC (SWR) pipe of 75mm bore in double socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed by Engr-in-charge
S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and directed by Engr-in-charge
S&F PVC (SWR) bends of 75mm bore in radius complete all as specified and directed by Engr-in-charge
S&F PVC (SWR) bends of 110mm bore in radiuscomplete all as specified and directed by Engr-in-charge
M&L rendering 10mm thick on fair faces of brick/block work or concrete surfaces in CM 1:6 complete all as specified and directed by Engr-in-charge
M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces with WPC 3% complete all as specified and directed by Engr-in-charge
M&L for rendering 5mm thick to celing concrete surfaces in CM 1:3 complete all as specified and directed by Engr-in-charge
M & L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper including application of white cement based wall care putty finish (3mm thick) for smooth finish.etc complete all as specified and directed by Engr-in-charge
M&L for preparation of new plastered surfaces on ceiling and applying three coat of white wash etc complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge
S& F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and directed by Engr-in-charge
M&L for applying two coats of oil bound distemper to wall surfaces, etc over the primer and make ,shade /tint complete all as specified and directed by Engr-in-charge
M&L for preparation of new surfaces of wall and applying two coat of exterior grade, weather resistant antifungal acrylic latex paint over one coat of primer complete all as specified and directed by Engr-in-charge
M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed by Engr-in-charge (a) One light point or one fan point or bell point controlled by one switch
(b) One 3 pin socket outlet, 5 Amp independent
(c) One 3 pin socket outlet, 5 Amp on the same board with other switches
All as per item No.98 here in before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed by Engr-in-charge (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately).
S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and directed by Engr-in-charge
S & F socket out let, 2 in 1, 3 pin, 5 Amps, 240 volts complete all as specified and directed by Engr-in-charge
S & F Switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed by Engr-in-charge
S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed by Engr-in-charge
S & F Ceiling rose, 3 way PVC insulated body complete all as specified and directed by Engr-in-charge.
Supply and fixing LED lights fitting Rod and Batten for 1x 18W, 220V,AC decorative type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete.Make: Bajaj(BLRB-DB 118 for Batten and BLRB 18W LED Rod,18W LED) or equivlent Philips/Havells
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Crompton or equivlent Bajaj/Philips/Havells
Supply and fix in repairs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating upto10/20 Apms
S&F in replacemen MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engr-in-charge
S&F in repairs MCB SPN 40 to 63 AMP, 240 Volts 10KA 'C' curve , complete all as specified and directed by Engr-in-charge
S&F in repairs MCB SP 5 To 32 AMP, single pole 240 Volts 10KA 'C' curve, complete all as specified and directed by Engr-in-charge
M&L sub main wiring of PVC FRLS insulated unsheathed two single core 4.00sqmm copper multi stranded conductor including one run of single core copper conductor of size 2.5 sqmm as earth wire drawing into PVC conduit on surface complete complete all as specified and directed by Engr-in-charge.
Supply and fixing LED street light fitting/Building light 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Crompton or equivlent Bajaj/Philips/Havells
S&F in repairs MCB SPN 6-32 AMP, 240 Volts 10KA 'C' curve , complete all as specified and directed by Engr-in-charge
Expert Electric Service And Stores
SAI SAMARTH ENTERPRISES
M/s S.D Construction Co
seema enterprises
RK AND SONS CREATION
KGN builders
VIJAYA ENTERPRISES
DWARKESH STRUCT-CON
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .