Repair/Renovation of Traffi...

Amount

Supply, Installation, Testing and Commissioning of 12 Volt 150AH, Inverter Battery with 24 Months Warranty complete in all respect up to entire satisfaction of Engineer-in Charge. Make: - Microtek/Luminous

Design, Supply, testing and commissioning of 4G Modem and GPRS Data Receiving and Sending Communication Devices working on Serial/I2C/ Mod bus TCP/ Ethernet TCP/IP protocols to be connected with separate City Signal Dashboard and Cloud Server System having following features and compatible for receiving and sending data of Traffic Signal Controllers Systems at junctions. The device should allow for the following tasks: i. Register and Login for the Application to communicate with the existing Controller Systems ii. Location of Traffic Signal Systems iii. Sending Programs and Data to the Controller Stations iv. Live display of Power Supply/Connectivity/Signal System UP or failure status v. Live Display of Traffic Signal Lights working with 4g time lag vi. Phone notification or SMS trigger to various Officials for Signal Failures indicators such as Power failure/ Signal Lights OFF complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - RRE/BEL/KELTRON/TP/CISCO/Zembros)

Supply and erection of 1 Nos. X 12V 42Amp-Hr Power safe Sealed Maintenance free Battery Model EP-42-12 complete in all respects with connecting terminals etc. The Batteries should be mounted in existing Panels/MS Boxes and duly provided with special arrangement so as to prevent thefts. complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Exide/Luminious/Amron)

Supply and erection of MS pipe pole 8 Mtr. long with cantilever. The pole shall be fabricated in two steps with ISI marked MS pipe 125mm NB dia 3.0 Mtr. (B-Class) and 100 mm dia (B-Class) 6.0 Mtr. Long. The top side of the pole shall be provided with 50mm NB dia (A-Class) MS pipe bracket (3.0 mtr. long) to make the pole P-type dia MS pipe and petty items such as MS supporting plates, MS flanges for jointing of pipes including necessary nuts and bolts for fixing of signals head assemblies shall also be provided. The pole shall be installed on the MS Sheet 200 x 200 x 6 mm and pole top at the top of the pole complete as per design / drawing attached. The pole Structure should be provided with Polyurethane paint coatings after 2 coats of etching with all dimensions as per attached drawing complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Jindal/TATA/Hindustan)

Supply and Erection of Live Communication based Intelligent Motherboard Traffic Signal system compatible with GSM Model and facility for connectivity to control room, Vehicle Actuation and Area Control Connectivity, including sending of Time data to the Matrix Timers after determining the Traffic Intensity from Traffic Sensors and Cameras for Vehicle Management. The detailed specifications of the controller are as below: -: HARDWARE (Memory: NOVRAM with built in battery backup System clock: Calendar clock (RTC) with minimum 5 years Battery back-up clock iii. Sending Programs and Data to the Controller Stations. Accuracy of Programming ? 1 sec per week Programming Facility: -Through external Engineering Application WITH BLUETOOTH operation. Live Display of Traffic Signal Lights working with 4g time lag.) FEATURES (Number of signals: -Minimum 16 signals group should be programmable as either vehicular or Pedestrian groups. Additional Programmable dummy groups as desirable. Number of stages: - 16 stages. Outputs: - The Motherboard should have Connector to connect further to the Sub Control Unit). Vehicle Actuation: RS232/RS485/DI ports should be provided for communication with sensors and inbuilt software should be provided for Vehicle Actuation Facility so as to run the Traffic Signal in Vehicle Actuation Mode. The control system should have facility for working in Vehicle Actuation Mode. It should sense the inputs from various existing Traffic Sensors and adjust the Traffic Signals according to the intensity of traffic on all four/six roads of the Traffic Junction. The controller should be programmable so as to work in Vehicle Actuation at a particular time of the day/whole day/particular date etc. The controller should be integrated with Vehicle Detector cards, Vehicle Sensors cards etc. complete in all respects. Area Traffic control compatibility Controller should have live Ethernet/internet port for connecting to the area traffic control centre. Live port should be provided and testing / demo should be done /displayed before commissioning of controller. No hardware/software should be required to be provided up to controller at later stage when connection is required for area controller. ENVIRONMENTAL FEATURES: - Operating voltage: 24VDC, Temperature: 00 C to 700 C, Relative Humidity: Max 95% The controller shall be installed in the pedestal and also making connections to it with all the incoming and outgoing cables as per site requirement complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge. (Make: - Siemens/Keltron/RRE/Bel/APPTrans)

Supply and erection of IP-65 Approved One Aspect Signal Head LED Light Assembly of 300mm dia fabricated from polycarbonate materials die moulded Complete in all respects of nominal size 380 X 350mm complete in all respect with LED type traffic signals glasses. The visor shall be fabricated from UV Stabilised HDPE Materials of length min 254 mm depth and tilted 50 along the geometric axis from the back side to front end as per IS 7537-1974 and the assemblies shall have provision for mounting of pole to permit directional adjustments. The lenses of red, amber or green colour shall be fabricated from 5mm dia LEDs of light intensity of minimum 5000 mcd and the electronic switching circuit wired on printed circuit board of epoxy material with transparent covering glass of polycarbonate materials. LED Viewing Angle should be 23 degrees with max. Forward Current as 20 mA and lamp shall be visible from 400m under normal atmospheric conditions (Conforming to IEC60529) a) Signal Head Assembly with a minimum of 190 LEDs of Red/Amber colour complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Keltron/RRE/Bel/Siemens/ APPTrans)

Supply and erection of IP-65 Approved One Aspect Signal Head LED Light Assembly of 300mm dia fabricated from polycarbonate materials die moulded Complete in all respects of nominal size 380 X 350mm complete in all respect with LED type traffic signals glasses. The visor shall be fabricated from UV Stabilised HDPE Materials of length min 254 mm depth and tilted 50 along the geometric axis from the back side to front end as per IS 7537-1974 and the assemblies shall have provision for mounting of pole to permit directional adjustments. The lenses of red, amber or green colour shall be fabricated from 5mm dia LEDs of light intensity of minimum 5000 mcd and the electronic switching circuit wired on printed circuit board of epoxy material with transparent covering glass of polycarbonate materials. LED Viewing Angle should be 23 degrees with max. Forward Current as 20 mA and lamp shall be visible from 400m under normal atmospheric conditions (Conforming to IEC60529) a) Signal Head Assembly with a minimum of 66 LEDs of Green colour in Arrow complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Keltron/RRE/Bel/Siemens)

Supply and erection of Heavy Duty 24V cum 12V DC Rectifier of up to 20Ampere Capacity for extra charging of 24V DC 300AH Batteries complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge. (Make: - Exide /Tata/Amron)

Supply and erection of Industrial Grade Intelligent 1400W Battery Charger Systems provided with intelligent float charging circuit for total capacity of 300Ahbatteries @ 24V and 1 No 12V 42Ah. The system shall be provided with low/high voltage cut arrangement so as to ensure that in the event of continuous power failure, the batteries do not get deep discharged/ over charged. The charger shall be fabricated from weather resistant heavy duty Power Diodes, Switching FETs/Transistors assembled on Aluminium Heat Sink units, charging circuits and metering to show Voltage levels etc. The Charger should also have integrated 12V Charging System. The system shall be housed in existing box. The cost shall include required wiring of the same complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge. (Make: - APLAB/ RRE / ELAK/ ABB)

S/E of CDT with in-built Timer display for showing Traffic Light Remaining Time. 1. Timer Display part - Two Colour Microprocessor based Down Counter Timer for computerized ATC Signals to display the timings of Red, Straight Green or Side Green timings independently (as per requirement) in respective red or green colour. The down counters should have 2½ digits with a capability of counting down of Red/ green times duly synchronized with multi programmable microprocessor controller. The system should itself note the change in programmable timings of the controller and it should adjust to changed Red/ Green timings in the next cycle. The display of amber cycle should be optional. The job also includes the cost of calibration of the system including the cost of material and labour existing Lamp/ sub control unit to the down counter with PVC sheathed Copper wire complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge. (Make: - Siemen/Bel/RRe/Cms/Keltron/APPtrans)

Supply and erection of Aspect holding Stands (Arms): -Aspect stands suitable for moving of aspects L/R and S/F position according Traffic waves. The aspect stand made with M S Patti. square Strips duly polished (Special Coating) complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge.

Analysis of Rate Supply and erection of PVC insulated and PVC round sheathed, Multicore Annelaed Bare Copper Conductor (flexible) of size 1 sq. mm 8 core industrial cable for working voltage up to 1100 volts, conforming to IS 694: 2010 ISI marked complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Grandlay | Havells| KEI or its equivalent)

Supply and erection of PVC insulated and PVC round sheathed, Multicore Annelaed Bare Copper Conductor (flexible) of size 1 sq. mm 10 core industrial cable for working voltage up to 1100 volts, conforming to IS 694: 2010 ISI marked complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - Grandlay | Havells| KEI or its equivalent)

Supply and erection of Junction box having size 10x6 complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge. Make: - Sintex

Supply and erection of 8mtr Pole for Supporting traffic Lights Wire Service Cable in two step 100mm 20`and 80mm 10` Long with all clumps complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge.

Bidder Name

Amount

ASSURED PACIFIERS PVT LTD (GSTN-03AANCA8450A1Z1) BID ID -1131232

Protele Engineers (GSTN-04BJBPS6062F1ZC) BID ID -1131297

Protele Engineers

Protele Engineers