REAPIRS TO JOINERY, GLASS PAN, WIRE MESH, PARTITIONS, FLOORING, PLASTERING, PLINTH PROTECTION, RAIN WATER PIPES etc., UNDER ZONE C AND D UNDER GE CHENNAI

Amount

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each all as specified and as directed .

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each all as specified and as directed .

Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each all as specified and as directed .

Taking down shutters of any description n.exc. 1sqm each including builders hardware all as specified and as directed.

Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after cutting, easining etc with new iron mongry complete all as specified and as directed

Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed.

35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

30 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commericial type on both side etc. all as specified and as directed.

Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated all as specified and as directed.

Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs complete all as specified and as directed.

Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed .

Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Sheet glass 4.0mm thick,figured glass pin head type & glazing with oil putty or aluminium glazing clips in square n exc 0.5 sq.m in each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

Butt hinges, 75mm size medium weight cold rolled mild steel etc., complete all as specified and as directed.

Butt hinges, 100mm size medium weight cold rolled mild steel etc., complete all as specified and as directed.

Stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and as directed.

Aluminium handles cast type anodised 100 mm size complete all as specified and as directed.

Aluminium handles cast type anodised 150 mm size complete all as specified and as directed.

Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S&F in repairs Butt hinges, 75mm size medium weight cold rolled mild steel etc., complete all as specified and as directed.

S&F in repairs Butt hinges, 100mm size medium weight cold rolled mild steel etc., complete all as specified and as directed.

S&F in repairs stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and as directed.

S&F in repairs Aluminium handles cast type anodised 100 mm size complete all as specified and as directed.

S&F in repairs Aluminium handles cast type anodised 150 mm size complete all as specified and as directed.

S& F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete all as specified and as directed.

Cover plate 140 mm over all length, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Powder coated aluminum door shutters, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and as directed.

S&F in repairs aluminium powder coated sliding window with frame and shutter using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters etc ., The rate is inclusive of all fixings of builders hard ware such as aluminium wirmesh 1.4 mm aperture, hinges, handles, locking arrangements etc complete all as specified and as directed .

Powder coated anodised aluminium window and ventilator, side hung type without sash bars, alumimium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodosed lauminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) , hinges type B-21 100 m long (2Nos.) suitable handle (1 No. ) complete all as specified and as directed .

Aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ ventilator/ partition, glassing clipswith one or more tracks including joining cleats fot fixing complete all as specified and as directed .

18mm thick plywood, grade BWR, type BB with decorative laminate type1 0.90mm thick of surface finish colour and pattern as approved and fixed with approved adhesive as per manufacturers instructions fixed in repairs complete all as specified and as directed .

18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as fixed in repair complete all as specified and as directed .

12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair complete all as specified and as directed .

6mm thick external teak wood lipping over 18mm thick plywood fixed with nails complete all as specified and as directed .

6mm thick external teak wood lipping over 18/19mm thick particle board fixed with nails complete all as specified and as directed .

Continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open) 30mm in mm complete all as specified and directed.

Locks, drawer, cupboard shutters grade I, size 75 mm Brass 4 levers fixed in repair complete all as specified and directed.

Stainless steel Cabinet Hinges/self closing hinges (Bombay Hinges) fixed in repairs complete all as specified and as directed

Magnet closures to cabinet cupboards fixed in repairs complete all as specified and as directed

Aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clambs and fixed to wall PVC rawel plug and brass screws fixed in repairs all as specified and as directed including dismantling one of any description.

Aluminium designer curtain rod brackets suitable for above item complete all as specified and as directed.

Cast Aluminium (Die cast ) body door closer bydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg fixed in repairs complete all as specified and as directed.

Mortice lock vertical type mild steel size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors, fixed in repairs. complete all as specified and as directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls /floor complete including dismantling existing pipes all as specified and directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls /floor complete including dismantling existing pipes all as specified and directed.

PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) bends with oval access door75mm fixed in repairs complete all as specified and directed.

PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) juncton single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and directed.

PVC (SWR) juncton single (single T ) equal or un equal with access door 110 mm fixed in repairs complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

70 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates ) as in floor finshing, finish the surface even and smooth without using extra cement complete all as specified and directed.

75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.)

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and as directed

Fly ash brick work using sub class B bricks straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and as directed

15mm thick Rendering in CM 1:4 on fair faces of brickwork or concrete surfaces complete all as specified and as directed

M/L preparation of newly plastered wall surfaces and applying two coats of cement based paint incl primer complete all as specified and as directed

Demolition of Stone slabs and tiles of laid bedded and pointed in cement morter or in any description or thickness in floors, platforms, aprons etc. complete all as specified and as directed

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base 15 MM thick in CM 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (Note:- Tread of the stair case has to be provided with single stone.)

Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over backing coat of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. (Note:- Riser of the stair case has to be provided with single stone.)

Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises complete all as specified and as directed

Virified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4 complete all as specified and as directed.

Virified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement mortar 1:3, 10mm thich on fair faces of brick or concrete surfaces complete all as specified and as directed.

Non skid ceramic coloured joint free tile 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:6 laying in floor finish cement to match over complete all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingbacking coat in CM 1:4, 10 mm thick complete all as specified and as directed.

Glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and directed.

Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement plaster as a backing coat in CM 1:3 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or ceiling or from other concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

5 mm thick rendering using CM (1:3) on ceiling surfaces all as specified and as directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:4 and 5 mm thick in CM 1:3 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. (Note : WPC shall measured and paid separately.)

Expanded metal cut to lentgh, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples weight n,exc 4 kg/sqm fixed on wall oe ceiling surfaces with nails of screws to receive plaster to strengthen the member complete all as specified and directed.

Liquid water proofing compound (Make SIKA/FOSROC/CHOKSEY)

Preparation of new plasteres surfaces of wall and applying one coat of chalk whitening over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling/facia complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc., ) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with stapples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make: GYPTECH /ARMSTRONG complete all as specified and as directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs with threaded type including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs with threaded type including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Aluminium door , window (sliding and openable) , ventilator with fixing of screws and rubber beading fixed in repairs and making good the original position complete all as specified and as directed

Powder coated aluminum handle of weight n.exc 150gm/each suitable for side hung shutter fixed in repairs complete all as specified and as directed.

Powder coated aluminum peg stay 300mm long, weight n.exc 150gm/each fixed in repairs complete all as specified and as directed.

Double action floor spring hydraullically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of steel heavy duty and fixed including removing old floor spring complete all as specified and as directed.

Fully glazed shutters made out of toughened glass shutter suitable for opening n. exc 1.2 m wide as approved by GE, drilling holes for fixing handles and incl provision of stainless steel mat finish handle 100 mm- 02 nos, suitable lockjing arrangements, center lock, stainless steel floor spring, patch fittings consisting of bottom patch, top patch and top pivot with stainless teel fixing plate etc., complete incl taking down old unsevicable glass door all as specified and as directed. Note: The unit rtae quoated shall deem to include all necessary builders hardware except door closure

Taking down rolling steel shutters pull and push type n.exc 14 sqm of clear opening each incl hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing all the moving parts of roling shutters and straining rolling shafts, tightening and re-fixing the same complete all as specified and as directed.

Taking down rolling steel shutters/ collapsible gates complete all as specified and as directed.

Steel rolling shutters pull (1mm laths thickness) without ball bearing as specified including top cover anchoring rod, hasp and staples, guide channels and one shop coat of primer erected in position as per site requirement complete all as specified and as directed.

M/SJAYAM CONSTRUCTIONS

G.L.THIRUMALAI NAIDU AND COMPANY

SWIFTTECH ENGINEERS INDIA PVT LIMITED

KS CONSTRUCTIONS

G HARI ELECTRICALS