SPECIAL REPAIRS TO STEEL FURNITURE AGAINST BER ITEMS OF FURNITURE UNDER GE MISSAMARI

Amount

Manufacture and supply of Locker Bed Side Steel, complete all as shown in Drawing no. (FD-1029). DIMENSION : Overall size shall be 760mm long, 600mm wide and 1100mm high. DESCRIPTION : The locker shall be made of mild steel sheet 1mm thick. 20mm dia conduit pipe chrome plated with wall thickness of 1.6mm shall be fixed with side sockets. One 100mm CP handle alongwith three way locking system shall be provided in place of hasp and staple irrespective of what is shown in drg. The lock provided shall be ISI marked. The left shutters shall be provided with 75mm long tower bolt inside at upper and lower ends also. The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet. FINISH : All steel surface internally and externally, exposed to view when placed in position shall be given two coats of silver grey enamel paint over a coat of primer of approved make after proper smoothening of the surface with sand paper. A mark of MES shall also be provided at top left corner of front shutter of visible colour. Painting shall be done with spray machine. The weight of the locker shall not be be less than 42 kgs. Rest all specifications are as per drg.

Manufacture and supply of Bed Hard Steel, complete all as shown in Drawing no. (FD/E6/MAP/08 (R)). DESCRIPTION : Overall size shall be 2050mm long, 980mm wide and 800mm high.All steel shall be of rectangular MS pipe of 18 Gauge. The head board shall be 800mm high and foot board shall be 500mm high. The frame of head board and foot board shall be of 38mm x 38mm square MS pipe. 18mm x 18mm square MS pipe shall be provided in the inner of head board frame/foot board frame as shown in drg. 18mm thick both side decorative prelaminated MDF board of approved shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick square MS pipe with standard workmanship both in head board / foot board. 25mm x 65mm rectangular MS pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg. One stiffener of size 25mm x 25mm shall be welded between the two legs of head board over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mm x 25mm SQ MS pipe in line with bottom of 25 x 65mm long rail section. PVC shoes shall be provided to legs of bed. FINISH : All metal / iron work shall be pre treated with epoxy powder coated oven baked with synthetic enamel black after doing two coats of metal primer. Rest all as per drg.

Manufacture and supply of Trestle Store Room Steel,complete all as shown in Drawing no. ( FD-1043) Overall size shall be 2440mm long, 600mm wide and 300mm high. Two long angle iron 40mm x 40mm x 6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mmx 3mm flat iron bracing, four in numbers and equally spaced with 50mm x 50mm x 6mm T iron and Two angle iron of size 40mmX40mmX6mm and 2440mm long shall be provided at the top. All steel and iron work surfaces exposed to view shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. Rest all as per drg

M/S NARAYAN ENTERPRISE

SRI JAINATH SINGH

M/S B.N. Prasad

Anand Construction

L.BHIMSEN

Rana Construction Co

Capital Construction Company