Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹3.8 LAccepted-AOC PANCHSHEEL NAGAR PANDRA MEHAL RANCHI | L-1 | Accepted-AOC lowest quoted bidder |
Tender Value
₹3.6 L
EMD Value
₹4,500
Closing Date
26 Jan 2024, 5:00 pmClosed
PE(Elect.)
OFFICE OF PO CHP-CPP, Piparwar Area, CCL, PO - Bachra, Dist - Chatra, Jharkhand - 829201 CHP-CPP,PIPARWAR
Providing second power source of electricity (D.G Power) through 440 V O/H line from sangam vihar D.G set to Ray-Bachra Rail weighbridge under CHP-CPP/PPR.
2024_CCL_298507_1
PE(Elect.)/CHP/PPR/23-24/69
Open Tender
Electrical and Maintenance Works
Item Rate
10 days
CHP-CPP, PIPARWAR
2 documents required · 2 mandatory
₹4,500
15 Apr 2024
13 Jan 2024
27 Jan 2024
13 Jan 2024
26 Jan 2024
13 Jan 2024
13 Jan 2024 - 19 Jan 2024
Amount
Supply of PCC pole size (Length) 8 /9/9.5 mtrs. (3500.00 + Freight charge Rs 850.00 = 4350.00 + GST @ 12 % 522.00 =4872.00)
Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 8.0 metre and upto 11.0 metre
Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Providing and Laying /Erection of Aerial Bunch Cable (3 x35 + 1 x 16 +1 x 25 Sq mm)
Providing and Installation of insulating Piercing Connector Complete.
Providing & fixing of suspension Clamp for Stringing of Cable .On top of Pole.
Providing & Fixing of Dead End Clamp
Providing & Fixing of Double Anchoring Clamp
Providing and fixing of Distribution Box 140 A,4 Phase.
35 Sq mm. Aluminium Armoured cable.(4 core)
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .
250 A ,4 pole ,35 KA molded case circuit breaker (MCCB)
Total impact of GST for the purpose of CTC
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .