REPAIR TO JOINERY, FLOOR, PLASTERING, SANITARY FITTING AND PLUMBING WORK IN OD COMPLEX AREA UNDER GE (EAST ) MATHURA

Amount

Taking up or down tubes 15 mm dia galvanized iron and connections complete.

M&L GI tube medium grade with all fittings and fixed complete to walls and ceiling or laid in floor 15mm bore complete.

Taking up or down tubes 20 mm dia galvanized iron and connections complete.

M&L GI tube medium grade with all fittings and fixed complete to walls and ceiling or laid in floor 20mm bore

M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

S&F 500 liters capacity rotational moulded polyethylene three layer water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections including dismantling existing old water storage tank all as specified.

S&F 1000 liters capacity rotational moulded polyethylene three layer water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections including dismantling existing old water storage tank all as specified.

S&F in repair Gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls incl necessary clamps etc incl dismantling old pipes

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls incl necessary clamps etc incl dismantling old pipes

S&F in repair PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal.

S&F in repair CP Hand washer for EWC including mixer, CP connection etc complete.

S&F in repairs PVC Jet for EWC complete set including 15 mm long as directed .

S&F in repair 5.50mm thick looking mirror of size 900x600mm on 6mm thick Plywood backing (AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished.

S&F in repairs corner racks with glass of size 300x300mm 8mm thick bevelled on edges with two brackets CP all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long of 1st quality

S&F in repair PVC flexible waste pipe 32 mm dia.

S&F in repair PVC flexible waste pipe 40mm dia.

S&F in repair 15 mm bore fancy type Chromium plated Angle stop valve cast copper alloy scap screwed one ends to iron pipe or for unions and other end by PVC connection all as specified

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified. Make :- Commander/Hindware/Slim line/Parry ware.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern all as specified.

S&F in repair PVC connection 15mm size with brass nut of 450mm long size

S&F in repair PVC flush pipe of 32 mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified. Make :- Commander/Hindware/Parry ware.

S&F in repair viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repairs viterous china squating pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergal foot rest with 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).

S&F in repairs viterous china wash hand basin, white flat back size 550x400mm (excluding taps, waste pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified.

S&F in repairs 15 mm dia brass chromium plated bib tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as fixed in repairs.

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as fixed in repairs.

S&F in repairs CP brass shower rose 125 mm X 100 mm size suitable for 15 mm bore pipe complete all as specified. Make :- Romex/Plumber/Spring/Parko

S&F in repair soap dish,any type,fixed to plugs with chromium plated brass screws. Make :- Hindware/cera-1st quality.

S&F in repairs 32 mm bore and 75 cm long PVC waste pipe for WHB complete all as specified. Make :- Polyplast/Prayag/Symet

S&F in repairs PVC waste pipe of standard pattern, not less than 75cm long, 40 mm dia for steel sink waste cuppling or of suitable size complete all as specified. Make- Polyplast/Symet/Prayag

S&F in reapirs CP curtain rod 20 mm dia (with necessary brackets including CP type decorative end holders.)

S&F in repairs ball valve high pressure of PTMT with expoxy coated aluminum rod & high density plastic ball screwed for iron pipe & fixed (minimum wt 15 mm-142 grams) for 20 mm bore pipe complete all as specified. Make :- Prayag/Symet

Supply and fix stainless steel plate racks of approved quality of size 1.0m x 0.90 m, in repairs. Make:- Vinod or equivalent makes as approved by GE

S&F stain less steel sink 1.00mm thick with drainage board for kitchen or laboratory with plugs, waste pipe washer including cantilever cast iron bracket connecting union etc over all size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified.

S&F in repair toilet paper holder. Make :- Jaquar cat No : AKP 35753 P or equivalent make as approved by GE.

S&F in repair wash basin mixer 15mm bore all as specified. Make : Jaquar cat No : FUS-29005B or equivalent make as approved by GE.

S&F in repairs wall mixer and hand shower with CP lead and hook for hand shower rest15mm size all as specified. Make :- Jaquar cat No : FUS-29281, SHA-479L450, SHA-571, HSH-5537N or equivalent make as approved by GE.

S&F in repairs Towel rack with lower hanger 600mm all as specified. Make :- Jaquar cat No : AKP 35781P or equivalent make as approved by GE.

S&F in repairs Towel rail 600mm all as specified Make :- Jaquar cat No : AKP 35711P or equivalent make as approved by GE.

S&F in repair bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete. Make :- Jaquar cat No : FUS-29037 or equivalent make given under list of make.

S&F in repair wash piller cock 15mm bore all as specified Make :- Jaquar cat No : FUS-29001 or equivalent make as approved by GE.

S&F in repair chromium plated shower rose with 240mm long arm incl fixing to steel pipes or union all 15mm bore as specified and directed. Make :- Essco cat No : ALE-536A, EOS-542A or equivalent make as approved by GE.

S&F Hand jet health faucet 15 mm bore with all connected fittings Make :- Essco cat No : ALE-583 or equivalent make as approved by GE.

S&F in repairs corner glass shelf. Make :-Essco cat No : ACN-1173 as approved by GE

S&F in repairs glass shelf 600mm long. Make:- Jaquar cat No : ACN-1171N as approved by GE.

S&F PVC Bathroom cabinet mirror (Multi utility) of size 355X455 mm. Make :- Polytuf/Prayag

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 250 ltrs and n.exc 500 ltrs.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 500 ltrs .

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed

S&F factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of red oxide primer.

All As per Item No 55 above but without glazing bars

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F 3.0mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F 5.5 mm thick Sheet glass, tinted quality and glazing in Aluminium door in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire stapple etc wooden/fillets (15mm x 15mm) duly painted with synthetic enamel paint complete all as specified.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel over a coat of zinc chromate primer complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including PCC M-15 grade (Nominal mix) using 20mm graded stone agregate all as specified and as directed.

S&F 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed PCC M-15 grade (Nominal mix) using 20mm graded stone agregate all as specified and as directed.

S&F 30 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F Factory made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II.

S&F 100 mm size Stainless steel butt hinges medium weight, fixed to chowkhats all as specified and as directed by Engineer-in-charge.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium anodised handle fabricated type all as specified and as directed by Engineer-in-charge.

S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.

S&F 100 mm aluminium anodised hasp and staple fixed to wooden shutter complete all as specified.

S&F 19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work in partition of cupboard shelves, pelmets etc complete all as specified.

S&F Door closer hydraulically regulated aluminium die cast body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

M&L for providing cement concrete M-10 grade (Nominal mix) using 20 mm graded stone aggregate as in blocks for fixing hold fast or any other purpose all as specified.

M&L for providing MS work as in hold fast etc all as specified.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.

M&L for rendering 15 mm thick on brick / concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement complete all as specified.

M&L rendering 15 mm thick on brick or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete all as specified.

M&L for cement plaster 10 mm thick in CM 1:3 on concrete surface as on ceiling finished even and smooth with out using extra cement complete.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash all as specified and directed by engineer in charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Renewing tiles in patches, area n. exc 5.0 Sq.m including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complite all as site requritment.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in skirting over 10mm thick rendering in CM 1:4 pointed neat cement slurry and pointed in white or colour cement to match.

M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15mm thick screed bed or bedding layer in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M/S Mishra construction

ajay construction

M/S ANIL KUMAR

M/s Orient Traders

M/s Hoti Lal Contractor

M/s Om Infracon

RAJ CONSTRUCTIONS

M/S YATENDRA SINGH