CONSTRUCTION OF 11 KV LINE AND LT LINE FOR POWER SUPPLY TO UPCOMING INDUSTRIAL CONSUMERS AT BARPALLI MSME PARK, IDCO UNDER LOCHAPADA ELECTRICAL SECTION, BERHAMPUR.

Cost of Matterial for Construction of 3Ph 3W 11KV line =0.69CKm,Cut point=06 nos,Guarding-02

Supply ( of all reqd. Materials ), Erection, testing & commissioning of 11mtrs long WPB (160 x 152mm) (30.44 KG/Mtr) Pole with base plate 300x300x12 and Excavation of pole pit in all kind of soil and rock up to a depth of 1.8 mtr from ground level & installation with mass concreting Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375Cu.mtr & couping of poles in ratio 1:1.5:3 (500X500 X450)= 0.1125 Cu mtr with necessary curing.complete in all respect with curing & as per approved technical specification & direction of EIC.

Supply & installation of Earthing of support (coil type). complete as required & as per approved technical specification & direction of EIC.

Supply ( of all reqd. Materials ), Erection & testing , commissioning of 9 mtr long 300 KG PSC pole (IS 1678-1998) for stud with RCC base plate (450 mm X 450mm X 75mm) & with Excavation of pole pit in all kind of soil and rock & installation with Cement concreting for stud with ratio 1:2:4, 0.2 Cu.m with necessary curing. complete in all respect as per approved technical specification and direction of E.I.C.

Supply & installation of Clamp for stud pole. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 100x50x6 mm GIchannel for straight Cross arm 1.2 mtr each 2 nos & 0.2 mtr long 2 Nos. for 1 Nos cut Point. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11KV GI V-Cross arm(10.2KG each) with G.I Back Clamp for V cross arm(0.85 KG each). complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11KV GI F-Clamp(2.9KG). complete as required & as per approved technical specification & direction of EIC.

Supply & installation of Fish Plate per cut point (0.428Kg, 4 nos each ). complete as required & as per approved technical specification & direction of EIC.

Supply & Stringing of 80 mm² AAAC conductor. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of PG Clamp for 80mm2 conductor. complete as required & as per approved technical specification & direction of EIC

Supply & installation of 11KV Pin Insulator (POLYMER). complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11 KV Disc Insulator B & S Type 70 KN POLYMER. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11 KV hard ware fitting B & S Type 70KN. complete as required & as per approved technical specification & direction of EIC.

Supply & fixing of G.I Nut, Bolt & Washers of assorted size. complete in all respect as per approved technical specification and direction of E.I.C.

Supply & installation of 100X50X6mm. GI Channel for straight cross arm (1.8 m X 4 pcs) for Guarding. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of EYE hook for Guarding. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of No-6 GI wire for guarding. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of No-8 GI wire for guarding. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of Alumunium Binding wire. complete as required & as per approved technical specification & direction of EIC.

Earth Pit : Supply (of all reqd. Materials ) ,Erection, testing & commissioning of pipe earth electrode made out of 40 mm dia class-B G.I Pipe of 3 mtr. Long with arrangements for fitting and termination of G.I Flat (25x6) mm 1.2 kg/Mtr with G.I nut-bolts and washers including cost of excavation of earth pit in all kind of soil & rock, filling with burnt wood charcoal, salt & soft soil and making brick masonry chamber with removable RCC cover complete as per approved technical specification and direction of E.I.C.

SITC of Anticlimbing Device using GI barbed wire (3kg per support) with Back Clamp (25X3 mm GI flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)). complete in all respect as per approved technical specification and direction of E.I.C.

Supply and installation of Danger Board using GI Back clamp (Pole-clamp) made of 25x3 mm flat flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). complete in all respect as per approved technical specification and direction of E.I.C.

Supply (of all reqd. Materials ) ,Erection, testing & commissioning of HT Stay Set complete including excavation of stay pit in all kind of soil and rock as required with GI HT Stay Set, Stay Clamp , Stay Insulator & 7/8 GI stay Wire Grade-2 & Concreting (1:2:4) of Stay Anchor plate of size (0.5x0.5x0.8)=0.2 Cu. Mtr. complete with curing as required & as per approved technical specification & direction of EIC.

Sundries (Binding wire, Insulating tape, pole numering etc). complete as required & as per direction of EIC..

Cost of Matterial for 11KV DP with AB Switch-1 nos

Supply ( of all reqd. Materials ), Erection, testing & commissioning of 11mtrs long WPB (160 x 152mm) (30.44 KG/Mtr) Pole with base plate 300x300x12 and Excavation of pole pit in all kind of soil and rock up to a depth of 1.8 mtr from ground level & installation with mass concreting Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1500mm) = 0.375Cu.mtr & couping of poles in ratio 1:1.5:3 (500X500X450)= 0.1125 Cu mtr with necessary curing.complete in all respect with curing & as per approved technical specification & direction of EIC.

Supply, fabrication, Erection, testing & commissioning of GI structural Members for DP structure: a)-Top Pressure GI Channel (100x50x6) 2.8mtr long 2 Nos (9.2kg/mtr) . b)-75x40x6 mm GI Channel 2.8 mtr long 2 Nos for AB Switch mounting(6.8kg/mtr). c)-75x40x6 mm GI Channel 2.8 mtr long 2 Nos Supporting Cross Bracing at bottom of DP. d)-50x50x6 mm GI Angle 3.6 mtr long 2 Nos for providing cross bracing at bottom of [email protected] Kg/ mtr . e)- Fish Plate per cut point (0.428Kg ,4nos each) . Complete in all respect as per approved technical specification & direction of EIC.

SITC of 11 KV,3-Pole 400A Line AB Switch. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11 KV Disc Insulator B & S Type 70 KN POLYMER. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of 11 KV hard ware fitting B & S Type 70KN. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of Earthing of support (coil type). complete as required & as per approved technical specification & direction of EIC.

Earth Pit : Supply (of all reqd. Materials ) ,Erection, testing & commissioning of pipe earth electrode made out of 40 mm dia class-B G.I Pipe of 3 mtr. Long with arrangements for fitting and termination of G.I Flat (25x6) mm 1.2 kg/Mtr with G.I nut-bolts and washers including cost of excavation of earth pit in all kind of soil & rock, filling with burnt wood charcoal, salt & soft soil and making brick masonry chamber with removable RCC cover .complete as per approved technical specification and direction of E.I.C.

Supply (of all reqd. Materials ) ,Erection, testing & commissioning of HT Stay Set complete including excavation of stay pit in all kind of soil and rock as required with GI HT Stay Set, Stay Clamp , Stay Insulator & 7/8 GI stay Wire Grade-2 & Concreting (1:2:4) of Stay Anchor plate of size (0.5x0.5x0.8)=0.2 Cu. Mtr. complete with curing as required & as per approved technical specification & direction of EIC.

Supply & fixing of G.I Nut, Bolt & Washers of assorted size. complete in all respect as per approved technical specification and direction of E.I.C.

SITC of Anticlimbing Device using GI barbed wire (3kg per support) with Back Clamp (25X3 mm GI flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)). complete in all respect as per approved technical specification and direction of E.I.C.

Supply and installation of Danger Board using GI Back clamp (Pole-clamp) made of 25x3 mm flat flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). complete in all respect as per approved technical specification and direction of E.I.C.

Sundries (Binding wire, Insulating tape, pole numbering etc). complete as required & as per direction of EIC..

Cost of Matterial for New LT Extension (3 ph 4w) line with AB Cable - 0.0.83KM

Supply ( of all reqd. Materials ), Erection & testing , commissioning of 9 mtr long 300 KG PSC pole as support (IS 1678-1998) with RCC base plate (450 mm X 450mm X 75mm) & with Excavation of pole pit in all kind of soil and rock up to a depth of 1.5 mtr from ground level & installation with mass concreting Concreting of poles in ratio 1:1.5:3 & couping of poles in ratio 1:1.5:3 (500X500X450)= 0.1125 Cu mtr with necessary curing. complete in all respect as per approved technical specification and direction of E.I.C.

Supply & Stringing of 3x 95 + 1 x 70 + 1 x 16 sqmm LT XLPE Aerial bunched Cable. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of Suspension clamp with I-Hook. complete as required & as per approved technical specification & direction of EIC

Supply & installation of Dead end clamp. complete as required & as per approved technical specification & direction of EIC

Supply & installation of Eye hook. complete as required & as per approved technical specification & direction of EIC.

Supply & installation of Pole clamp for I-Hook. complete as required & as per approved technical specification & direction of EIC.

SITC of Anticlimbing Device using GI barbed wire (3kg per support) with Back Clamp (25X3 mm GI flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)). complete in all respect as per approved technical specification and direction of E.I.C.

Supply( of all reqd. Materials ) & installation, testing & commissioning of GI Coil type Earthing device & Earthing connection from coil earthing to metallic parts using GI No-8 Wire for PSC Pole .complete in all respect as per approved technical specification and direction of E.I.C.

Supply and installation of Danger Board using GI Back clamp (Pole-clamp) made of 25x3 mm flat flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). complete in all respect as per approved technical specification and direction of E.I.C.

Supply (of all reqd. Materials ) ,Erection, testing & commissioning of LT Stay Set complete including excavation of stay pit in all kind of soil and rock as required with GI LT Stay Set, Stay Clamp , Stay Insulator & 7/12 GI stay Wire & Concreting (1:2:4) of Stay Anchor plate of size (0.5x0.5x0.8)=0.2 Cu. Mtr. complete with curing as required & as per approved technical specification & direction of EIC.

Supply & fixing of G.I Nut, Bolt & Washers of assorted size. complete in all respect as per approved technical specification and direction of E.I.C.

Sundries (Binding wire, Insulating tape, pole numering etc). complete as required & as per direction of EIC..

Cost of Matterial for Survey and Dismentalling

Survey of incremental/ delta network and assets changes of 11 kV network and updation in GESW databas.

Survey of incremental/ delta network and assets changes of LT network and updation in GESW databas.

Labour Charges for dismentalling of HT pole=01no.