REPAIR/MAINT OF INTERNAL ELECTRIFICATION AND REPAIR/MAINT OF EXTERNAL SERVICES INCLUDING REPLACEMENT OF OLD UNSV LT UG CABLE OF 652 COY ASC (CIV GT) AT IMTRAT UNDER GE (AF) HASIMARA

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately), removing from site and making good disturbed surfaces of walls, floors, etc. to match the existing complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor cable (FRLS) 1100 Volts grade drawn through and including 20 mm dia (medium grade) rigid non metallic PVC surface conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor cable (FRLS) for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item No.2 above but for one three / five pin switch-socket outlet, 5 Amps on the same board complete all as specified and as directed.

All as per item No.2 here-in-before but for one three / five pin switch-socket outlet, 5 Amps on independent board complete all as specified and as directed.

All as per item No.2 here-in-before but for one 16 Amp 3 pin / 5 pin switch socket outlet, on independent board, with 2.5 sqmm single core stranded copper conductor along with 1.5 sqmm continuous PVC insulated unsheathed stranded copper conductor cable for earth continuity wire, complete all as specified and as directed.

All as per item No.2 above but for one call bell point controlled by one bell push on independent board, complete all as specified and as directed.

Supply and fixing switch piano flush button, single pole one way 6 Amps, complete all as specified and as directed.

S & F bell push bottom type single pole one way 6 amps in replacement, complete all as specified and as directed

Supply and fixing lamp holder insulated body with back plate AC 230 Volt , complete all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite 65 mm x 50 mm size with three terminals, complete all as specified and as directed.

Supply and fixing switch socket combination 2 in 1, 5 pin, 6 Amps flush type, complete all as specified and as directed.

Supply and fixing switch socket combination 3 in 1, 5 pin, 16 Amp flush type, complete all as specified and as directed.

Supply and Fixing ceiling fan regulator, 2 M 100 W rotary step type,complete all as specified and as directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including PVC conduit concealed on wall /Floor and surface type on ceiling of size not essthan 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully for One light point / one fan point controlled by one, one way swtich, complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per ser item No. 14 here in before but for one 5 Amp 5 pin socket outlet point on same board complete all as specified and as directed.

All as per ser item No. 14 here in before but on independent board, complete all as specified and as directed.

All as per ser item No. 14 herein before but with 4.0 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes, complete all as specified and as directed.

All as per ser item No. 14 here in before but one bell/ buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and as directed.

Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing Switch socket outlet modular type, single pole, one way, and 15/16 Amps, one module, complete all as specified and as directed..

Supply and fixing socket outlet, multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type, complete all as specified and directed.

Supply and fixing socket outlet, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type, complete all as specified and directed.

Supply and fixing Bell push modular type, single pole, 5/6 Amp, complete all as specified and directed.

Supply and fixing of bell ding dong, AC, 230 volts, single phase, complete all as specified and directed.

Supply and fix 32 Amps starter including socket and box for mounting of power unit suitable for 32 Amps and connection of electric supply, complete all as specified and directed. Make : Legrand Cat Part No. 5735 42 /Havells/ ABB/ L&T.

S&F White cover plate with frame,3 module, complete all as specified and directed

S&F White cover plate with frame 4 module, complete all as specified and directed.

S&F White cover plate with frame 6 module, complete all as specified and directed.

Supply and fixing LED Bulk head fitting suitable for 1X10 watt LED including LED Light, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor (FRLS) of 4 sqmm size and drawing through pvc surface conduit/casing caping with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 4.0 sqmm, single core (FRLS), as earth continuity wire including taking down, Old sub- main wiring complete all as specified and directed. Note :- (Two run cable and one run earth continuity conductor and one run of PVC conduit/ casing caping shall be measured as single run).

Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor (FRLS) of 6 sqmm size and drawing through pvc surface conduit /casing caping with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 6 sqmm, single core (FRLS), as earth continuity wire including taking down, Old sub- wiring complete all as specified and directed. (Two run cable and one run earth continuity conductor one run of PVC conduit/ casing caping shall be measured as single run).

Supply and fixing sheet metal enclosure for single door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 2 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed

Supply and fixing sheet metal enclosure for single door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed

Supply and fixing sheet metal enclosure for single door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 40-63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Supply & fixing MCB Single Pole (SP) of capacity 6 Amps to 32 Amps, 240 Volts AC, breaking capacity 10 KA, C Series, fixed in proper position, complete all as specified and directed.

Supply & fixing RCCBs for earth leakage,overload & short circuit protection,double pole,100 mA 32A, complete all as specified and directed.

S & F in bell ding dong 230 volts, complete all as specified and directed.

S & F Invertor LED batten Light fittings 20 W with square profile and polycarbonate channel,lithium ion battery with charging time 8 hours - 10 hours and backup time upto 4 hours, completes all as specified and directed. Make - Havells cat no -LHEXACP7FN1W020 / or equivalent model of make Philips/ CG

S & F 20 W Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate ,environmental friendly, energy efficient, complete all as specified and directed. Make - Havells cat no- LHEXACP7UN1W020 or equivalent model of make Philips/ CG

Supply and fixing LED light fittig mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and directed. Make: Havells cat no -LHEXACP7UN1W010 or equivalent model of make Philips/ CG

Taking down ceiling fan from site of any make, any description 1200 / 1400 /1500mm sweep and any position/locations for repairs, servicing, overhauling, necessary lathe work, if required, dismantling and opening the ceiling fans, removing the burnt out copper winding and insulating material such as illuminous paper, glass sleeving, cleaning the slots and rewinding the same with supper enamelled copper winding wire (Make Atlas (Minal), National, HTP, HWP, Shital etc) with insulating material, insulating varnishing and reassembling the ceiling fan after replacement of unserviceable parts such as split pin, lock nut, rubber packing, clamp of condenser, blade nut, rubber reel insulator, nut bolt, plastic fan canopy and including three core (workshop cable) stranded copper conductor of size 23/0.0076 mm insulated as per required length, complete all as specified and directed.

Supply & fixing exhaust fan 250 mm sweep 1400 RPM , AC single phase 230/ 240 Volts with louvers complete fitting, completes all as specified and directed.

Supply & fixing heavy duty Exhaust fan steel body 300 mm sweep 1400 RPM , AC single phase 230/ 240 Volts with louvers necessary fitting and making suitable size of hole in brick wall and making good surfaces, complete all as specified and directed.

Supply and fixing ceiling fan complete with blades,down rods , electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

S & F in repair 14 Watt LED lamp complete all as specified and directed.

S & F in repair 9 Watt LED lamp complete all as specified and directed.

S & F in repair 7 Watt LED lamp complete all as specified and directed.

S & F surface mounted spotlight in matt finish or premium asthetics 5W LED 6500 k ,complete all as specified and directed. Make - Havells cat No- LHEEGBPGPH1W005/Bajaj/Equivalent model of make.

Taking down and Servicing of defective split (outdoor and indoor unit) type AC of 1.5/2 TR capacity of any type/size/make/model including replacement of unserviceable parts and cleaning/washing with high pressure water, washing condenser assembly by chemical, checking, retightening of all electrical connections, replacement of nut, bolts, screws, washers, drain pipe, internal wiring, gas charging valve,reassembling, realignment / refixing indoor and outdoor unit properly, repairing remote kit with parts / repairing display panel with parts etc bracket housing of capacitors, relay and reassembling,refixing properly after repair, complete all as specified and directed. Note : (1) Spare parts & gas charging will be measured & paid seperately under relevent items as supply only. (2) Fixing charge of parts / spares are deemed to be included in the unit rate

Supply only PCB for indoor unit of invertor AC model and make as per existing, complete all as specified and directed.

Supply only Remote Control suitable for 1.5/2 Ton split / window type AC as per existing make complete all as specified and directed.

Supply only fan motor for split AC 1.5/2.0 TR, single phase 230 Volt, 50 Hz as per sample, complete all as specified and directed.

Supply only Multi terminal capacitor (50+6/50+4mfd) suitable for Split AC (stating, running and fan combined) , complete all as specified and directed.

Supply only Rotary compressor for 2 Ton capacity, complete all as specified and directed (Make:- Hitachi/Samsung/BPL/LG.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 littre, BEE 5 star rated complete with all accessories such as safety valve , thermostate, NRV, connection piece etc., complete all as specified and directed.

S & F Bib taps , cast copper alloy with crutch or butterfly handle , screwed down , screw for iron pipe or for brass ferrule and fix 15 mm dia bore, complete all as specified and directed.

S & F stop valve cast copper alloy screw down high pressure with crutches or butterfly handle screwed both end for iron pipe or for union of size 15mm for GI tubing , complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nut of length 600mm , complete all as specified and directed.

S & F GI tubing medium grade with all fitting and fixed to wall /ceilling or laid in floor of size 15 mm bore, complete all as specified and directed.

S & F in repair 34/36W LED panel ultra slim made from exruded aluminium panel & super bright LED's including LED lamp and connecting, complete all as specified and directed .

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil, complete all as specified and as directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil, complete all as specified and as directed

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40 mm dia confirming to IS, approved colour comlete with fittings for cable protection, complete all as specified and as directed

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 80 mm dia confirming to IS, approved colour comlete with fittings for cable protection, complete all as specified and as directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 4 Core, complete all as specified and directed.

All as per ser item No. 68 here in before but for 16 Sq mm 4 Core, complete all as specified and directed.

All as per ser item No. 68 here in before but for 50 Sq mm 3.5 Core, complete all as specified and directed.

All as per ser item No. 68 here in before but for 95 Sq mm 3.5 Core, complete all as specified and directed.

Supply and fixing weather proof box made out of PVC including of one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm outside and 300 x 200 x 105mm inside dimension comprising of aluminium bus bar 4 strips for three phase and neutral 100 Amp and 6 Amp MCB for controlling the street light fitting including FI clamps 25 x 4 mm with necessary MS nuts bolts and washers including embossing/painting of danger notice of size not less then 10 x 7.5cm with letters, figure and conventional skull and bones in signal red colour on front face of KIOSK box body complete specified and all as directed. Make : Sintex cat part No -GS JB 3020 / Hensal /universal /Finolex.

S & F 3 core twisted PVC insulated and sherthed , multi stranded copper conductor cable of size 1.5 Sq mm for connection etc, complete all as specified and directed

M & L for Horizontal boring under the road (by manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed

Supply & laying galvanised steel tubing "light grade" with GI fittings in trenches/ under roads/ along pole/ wall for cable protection 40 mm bore, complete all as specified & directed by EIC. (Note :- Excavation and earth work shall be measured & paid seperately) .

All as per ser item No. 75 here in before but for 80 mm bore, complete all as specified and directed.

All as per ser item No. 75 here in before but for 100 mm bore, complete all as specified and directed.

Supply, installation, testing and commissioning (CPRI approved) factory fabricated LT Panel board (outdoor type) of suitable size to house undermentioned items,, weather dust and vermin proof fabricated out of 3.0 mm thick CRCA steel sheet with suitable channel iron supports at the base duly painted with synthetic enamelled paint including connection of incoming and outgoing cable with suitable size lugsand gland with the following:- (a) MCCB, 100 Amps , FP , 16 KA- 01 No. (b) MCCB, 63 Amps , TP , 16 KA- -01 No. (c) MCB, TPN 32 Amps , 05 No. (d) Aluminum bus bars suitable for 200 Amps capacity for 3 phase and 150 Amps for neutral supported on insulators (e) 3 pole power contractor Type ML 3, 2 NO + 2 NC ,L&T Cat no SS90721 (f) 24 Hour Analog Time Switch (SST - 15 min) Havells cat no - DHTED 15016 (g) LED type indicator lamps with holders ( R,Y,B) - 01 set (h) Necessary excavation, earthwork, PCC lean type D2 and PCC type C2 plateform complete as required-01 No.

M&L for earthing complete with galvanised steel / galvanised cast iron earth plate electrode 600 x 600 x 6mm thick, buried directly in ground to a depth not less than 2.25 metre deep below ground level with top edge of plate not less than 1.5 M below normal ground level,surrounded with adequate qty of charcoal dust ixed with sath to a packed thickness of 15 cm all around the plate using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipent at another end. GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate up to equipments , 20 mm dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel,with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick pre cast RCC 1:2:4 type B-1 duly reinforced with MS round bar as in lifting handles, excavation, earth work including including laying the GI pipe concealed in floor/wall all as described in electrical plate of SSR Part- I, complete all as specified and directed and testing on completion. Note:- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

All as per ser item No. 79 here in before but for using Galvanised earth lead wire 4.0 mm dia as earthing lead,complete all as specified and directed

Supply and fixing in repair fully automatic star delta starter, in sheet - steel enclosure type with single phase preventor suitable for submersible pump motor capacity upto 15 HP 415V, 50 HZ 3- ph,relay range 20 - 32 Amps, complete all as specified and directed. Make : L&T CAT No - MU-G15 FASD/ equivalent in Havells.

Disconnecting the elelctric and water supply connection and other related items and lifting the submersible pump of capacity up to 20.0 HP 3 Phase, 415 V by machanical / manual method and dismantling the coloum pipe line shafts stage by stage and keep them safe custody for reuse including transporting the defective pump set where required from pump house to wksp for repair and lowering the same on existing bore well after necessary repair incl testing, complete all as specified and directed

Taking down the unservicable parts and burnt out copper winding from pump and motor upto 20 HP capacity submersible and rewinding the motor with poly insulated water proof copper wire suitable gauge including heating ,varnishing and painting, complete all as specified and directed Note:- (a) Spare / parts shall be measured & paid seperately. (b) Labour charge for fixing parts shall deemed to be included in the unit rate.

Supply only the following parts suitable for submersible motor of capacity upto 20 HP 3 phase 415 volts:- Thrust bearing plate for crbon TB Assy, complete all as specified and directed

All as per ser item No. 84 here in before but for Bearing bush rubber for motor shaft, complete all as specified and directed.

All as per ser item No. 84 here in before but forMotor shaft sleaves (stainless steel), complete all as specified and directed.

All as per ser item No. 84 here in before but Thrust bearing assy carbon, complete all as specified and directed.

All as per ser item No. 84 here in before but for GM bush for motor shaftt, complete all as specified and directed.

All as per ser item No. 84 here in before but for Motor sand guard, complete all as specified and directed.

All as per ser item No. 84 here in before but for Oil seal , complete all as specified and directed.

All as per ser item No. 84 here in before but for Motor bearing housing, complete all as specified and directed.

All as per ser item No. 84 here in before but for Copper end ring, complete all as specified and directed.

All as per ser item No. 84 here in before but for Motor coupling key, complete all as specified and directed.

All as per ser item No. 84 here in before but for Motor coupling, complete all as specified and directed.

All as per ser item No. 84 here in before but for Pad for thrust bearing made out of carbon, complete all as specified and directed.

All as per ser item No. 84 here in before but for Stud nut stainless steel, complete all as specified and directed.

All as per ser item No. 84 here in before but for Cir clip lock for motor, complete all as specified and directed.

Machine work on the worn out portion of gun metal impeller of submersible pump incl metaling cutting, polishing and checking the accuracy on the lath machine as directed by Engr-in-charge upto 20 HP pump etc, complete all as specified and directed.

S&F PVC insulated, PVC sheathed , stranded copper conductor as in flat submersible water proof cable of size 10 sqmm 3 core 1100 volts grade incl taking down old one, complete as specified and directed.

Taking down and dismantling the component from engine assy of 62.5 KVA, Make: Kirloskar/ Crompton Greeves, Diesel Engine segragating serviceable and semi/unserviceable and , decarbonisation, cleaning enterior & exterior all parts by disconnect the out-going connection of diesel engine from the Panel Board and re-assembling the same after repair/replacement of defective spairs as directed by EIC( Spare parts / components measured and paid separately under relivent items), complete all as specified and directed.

Repair/ Re-conditioning of cylinder head machine work complete all as directed by EIC, complete all as specified and directed.

Repair/re-conditioning of cooling pump with its all assembly ,pipes and clamping ring, engine mounted including machine work , complete all as specified and directed.

Repair/re-conditiong of exhaust manifold, cleaning, pressure testing for detection of leak, de-sealing leak-proof by necessary welding including machine work , comlete all as specified and directed.

Overhauling and repairing of radiator body/tube including its fan assembly by cleaning, welding , brazing etc (each job leak repair consider as one job ), complete all as specified and directed.

Repair the ON/OFF Solenoid switch including spares , complete all as specified and directed.

Servicing/Repair of alternator 3 Phase 440V capacity upto 62.5 Kva, Make: Kirloskar/ Crompton Greeves:- Dismantling the alternator from its mounting by unscrewing the nut & bolts. Cleaning the whole assy of alternator, Replace the commutator, carbon brush & holder. After it assebling the all parts and mounted the alternator on its same place and do the connection as previous, complete all as specified and directed.

Repair of 12 Volt self starter:- Dismantling the weak self starter motor of capacity & make as taken out mentioned above , segragating serviceable and semi/unserviceable parts , cleaning serviceable parts , drying, lubricating. Reassembling the self starter motor with cleaned serviceable parts along with the new parts as below and testing complete as directed by EIC:- (i) Armature, (ii) Armature brake spring, (iii) Bendix drive assy (iv) Bush Set ( Set of 02 Nos), (v) Bush spring, (vi) Bush Holder (vii) Bushing commutator end, (viii) Carbon bush set , (ix) Drive bushing pinion drive lever, (x) End cap gasket , (xi) Field coil set (Set of 4 Nos) (xii) Magnetic switch

Supply only spare parts for the DG set engine upto 62.5 KVA, Piston ring set, complete all as specified and directed.

All as per ser item No. 108 here in before but for Piston pin, complete all as specified and directed.

All as per ser item No. 108 here in before but for Piston circlips, complete all as specified and directed.

All as per ser item No. 108 here in before but for O seal ring, first groove, complete all as specified and directed.

All as per ser item No. 108 here in before but for O seal ring, 2nd & 3rd groove, complete all as specified and directed.

All as per ser item No. 108 here in before but for Main bearing upper & lower, complete all as specified and directed.

All as per ser item No. 108 here in before but for Oil seal ring, complete all as specified and directed.

All as per ser item No. 108 here in before but for Radiator cap, complete all as specified and directed.

All as per ser item No. 108 here in before but for thrust bearing, complete all as specified and directed.

All as per ser item No. 108 here in before but for Intake/exhaust valve, complete all as specified and directed.

All as per ser item No. 108 here in before but for intake/exhaust valve seat ring, complete all as specified and directed.

All as per ser item No. 108 here in before but for Valve guide, complete all as specified and directed.

All as per ser item No. 108 here in before but for Valve collect, complete all as specified and directed.

All as per ser item No. 108 here in before but for valve stem cap, complete all as specified and directed.

All as per ser item No. 108 here in before but for Valve seal, complete all as specified and directed.

All as per ser item No. 108 here in before but for Washer for cylender head cover, complete all as specified and directed.

All as per ser item No. 108 here in before but for Seal ring rocker arm, complete all as specified and directed.

All as per ser item No. 108 here in before but for Water drain cock sub assy, complete all as specified and directed.

All as per ser item No. 108 here in before but for Cylender head gasket, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket cylender cover, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket for water return pipe, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket Timing gear case, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket gear case cover, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket fuel injection window cover, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket Oil sump, complete all as specified and directed.

All as per ser item No. 108 here in before but for Flywheel housing gasket, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket, inlet manifold, complete all as specified and directed.

All as per ser item No. 108 here in before but for Gasket, exhaust manifold, complete all as specified and directed.

All as per ser item No. 108 here in before but for Cylender liner, complete all as specified and directed.

Supply and fix on load change over switch 415 V in sheet metal enclosure 4 pole of capacity 320 Amps, complete all as specified and directed.

Supply and fix on load change over switch 415 V in sheet metal enclosure 4 pole of capacity 200 Amps, complete all as specified and directed. .

Supply and fix in repair bollards light single phase 10 Watt, including wiring/ connection and PCC foundation reqd as per specified and complete all as specified and directed.

Supply and fixing energy efficient 'Road way lighting Series' Lexon 45 W LED luminaire with Aluminium PDC housing, toughened glass cover with IP66 protection, complete all as specified and directed.

S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing , 40 mm bore , light grade fixed to pole , etc with suitable size flat iron clamp, nuts , bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed .

S&F in replacement MCCB 415V,16KA,4 Pole 63A, complete all as specified and directed.

S&F in replacement MCCB 415V,16KA,4 Pole 100A, complete all as specified and directed.

S&F in replacement MCCB 415V,16KA,4 Pole 125A, complete all as specified and directed.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store, 25 mm dia, complete all as specified and directed.

All as per ser item No. 145 here in before but for 50 mm dia, complete all as specified and directed.

All as per ser item No. 145 here in before but for 80 mm dia, complete all as specified and directed.

Supply & laying (in replacement) galvanised steel tubing "Medium grade" with GI fittings in trenches/ under roads/ along pole/ wall for cable protection for the size of the 25 mm bore, complete all as specified and directed.

All as per ser item No. 148 here in before but for 40 mm bore, complete all as specified and directed.

All as per ser item No. 148 here in before but for 80 mm bore, complete all as specified and directed.

Supply & fixing sluice valve flanged and of class 1.6 PN including necessary new gasket, nut and bolts, washers etc after taking out u/s one size 80 mm dia , complete all as specified and directed.

Supply & fixing sluice valve flanged and of class 1.6 PN including necessary new gasket, nut and bolts, washers etc after taking out u/s one size 100 mm dia , complete all as specified and directed.

M&L for paiting steel tubular poles,8.5 meter in height above GL including cross arms and bracings on existing surface after cleaning and removing dust,rust & dirt with one coat of redoxide primer and two coat of aluminium paint painting with black & white alternate strips of 30 cm each externaly from ground level upto 1.5 mtr with synthetic enamel paint and numbering of pole , complete all as specified and directed.

S & F in repairs first aid box at E/M installation to keep the first aid items i.e. Regular use medicine .a tube of burnol , bandage one small snizer , banded etc ,the box will be made out of GI sheet of 18 Gauge and the size of the box will be 30cm x 25 cm x 20 cm with openable window at front side with help of hinge at one side and locking arrangement at another side ,openable window must painted with ''FIRST AID'' with red paint and whole box will fixed on wall at height not less then 2 mtr , complete all as specified and directed.

M & L straight through joints (epoxy) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 70 to 95 sq mm. 3.5 core and testing complete all as specified and directed. .

M & L straight through joints (epoxy) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 35 to 50 sq mm. 3.5 core and testing complete all as specified and as directed.

Taking out 200 KVA unserviceable stabilizer from site by dismantling all electrical connectiion from panel and rearrange for bypass connection temporary basis and carry to the contractors workshop and dismantle the outer and inner fittings part by part carefully and repair/replacement of all under mentioned unserviceable spare parts along with connectivity accessories including overhauling other parts complete and reinstall its previous place with proper connection by thimboling all termination end of cable as directed , complete all as specified and directed.

Taking out burnt out coil from stabilizer of capacity 200 KVA and rewinding the same with DPC copper wire of existing gauge and weight with insulaing materials for LT coil of approved quality as directed complete all as specified and directed.

S & F control PCB card suitable for 200 KVA stabilizer complete all as specified and directed.

M/L for rewiring control circuit partially with single core copper conductor as per existing size including labour charge complete for 200 KVA stabilizer complete all as specified and directed.

Supply and filling up transformer oil (Grade 'B') in Transformers and oil circuit Breakers installed at various Sub stations, having Di-electric strength not less than 40 KV on 4mm over gap for a period of one minute omplete all as specified and directed. Note: An amount of Rs.25421.00 on account of credit schedule for Schedule 'A' Part-II shall be deducted from the total amount of BoQ to arrive at the contract sum.

M/S BISHAL ENTERPRISES

M/S ASHOK ENTERPRISE

M/S BIJAY KUMAR SHIVA

SHRI PARTHA DUTTA

M/S SARDAR MAL NAHATA

BHARAT ELECTRIC

M/S. KUMAR CONSTRUCTION CO.