PROVISION OF CERTAIN REVENUE WORKS MINOR WORKS ETC UNDER GARRISON ENGINEER AMRITSAR CANTT

Amount

Surface dressing not exceeding 15cm deep in any type of soil complete all as specified and directed.

Surface excavation in soft/ loose soil not exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in any type of soil of required size and depth and getting out complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation etc, complete all as specified and directed.

Material and labour for rolled mild steel work as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle, channel or flat sections) including distance pieces , cleats etc.conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts including necessary cuttings, drillings, and screwing etc , wind tie of roof including drilling holews, notching for screwed, rebating or welding conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

Supply and fixing mild steel work as in MS Plates, etc. including drilling holews, notching for screwed, rebating or welding conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

Supply and fixing mild Secrew bolt ( Machine made ) with hexagonal or square head at one end and screwed the other , or screwed both ends each secrewed end to be fitted with washer and one hexagonal or square nuts. exc 10 but n exc 15 cm long complete all as specified and directed.

Supply and fixing prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 Mpa as in roof covering in roof covering incudingl ridge fixed with self tapping screws complete all as specified and directed.

Supply and fixing 0.50 mm plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for brick work with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified & directed.

Material and labour for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished fair and even surface without using extra cement complete all as specified and directed.

Material and labour for 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in sub base of floor complete all as specified and directed.

Material and labour for 25mm sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation in soft/loose soil and getting out complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m high above the starting point complete all as specified & directed.

Returning filling in including, spreading, leveling watering and well ramming in layer not exc 25 cm complete all as specified and directed.

Material and labour for PCC Type D2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified & directed.

Material and labour for RCC (Nominal Mix) type B1, 1:2:4 (20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for RCC (Nominal Mix) type B1, 1:2:4 (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for RCC (Nominal Mix) type B1, 1:2:4 (20mm graded crushed stone aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Material and labour for RCC (Nominal Mix) type B1, 1:2:4 (20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work complete all as specified and directed.

Supply and fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Material and labour for for flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves & Slab including supports etc for fair finished surface complete all as specified and directed.

Material and labour for formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and directed.

Material and labour for steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Srl item No.29 above but 5mm dia and over upto and including 10mm dia as in stirrups, etc. complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying two coats of white wash Complete all as specified and directed.

Material and labour for preparing of new plastered surface and applying two coats cement base paints on walls complete all as specified and directed.

Material and labour for preparing of new surface of plaster and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of new surfaces of steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay including a coat of red oxide primer complete all as specified and directed.

Supply and fixing 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fixing factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube including necessary fixing lugs, butt hings, screws etc.in opening as per specification complete all as specified and directed.

Supply and fixing factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

Supply and fixing butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long complete all as specified and directed.

Supply and fixing 150mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fixing for 125mm aluminium handle, cast type ,anodised and pattern/design as approved complete all as specified and directed.

Material and labour for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub floor complete all as specified and directed.

Material and labour for Non skid cerermic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 20mm thick screed bed in cement mortar (1:6) in floors complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles in vertical surface 350mmx 450mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as in skriting /dado and over & including 10mm thick in rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection and finished fair and even without using extra cement complete all as specified and directed.

Supply and fixing plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making good to floor etc. complete all as specified and as directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing vitreous china urinal, bowl type complete flat back size 465x35x265 mm white with including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs grating union and discharge pipe including brackets complete all as specified and directed .

Supply and fixing vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified.

Supply and fixing Soap dish fixed to walls with chromium plated brass screws complete all as specified and directed.

Supply and fixing Brass chromium plated tubular towel rail, 20mm dia between flanges complete all as specified and directed.

Supply and fixing for Pillar tap cast copper alloy with capstan heads chromium plated screw for 15 mm dia high pressure with or without letters hot or cold with long screwed shank and fly nuts complete all as specified and directed.

Supply and fixing bib tap cast copper alloy chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed.

Supply and fixing Stop/angle cock 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing for PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

Supply and fixing Rotational moulded polythylene water strarge tanks 1000 litre (Cylinderical vertical with closed top ) triple layered hoisted and fixed in position complete all as specified and directed.

Supply and fixing PVC low level flushing cistern 10 litres capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets complete all as specified and directed.

Supply and fixing 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors including necessary cuttings, chases and making good in cement mortar 1:3 complete all as specified and directed.

Supply and fixing15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors including necessary cuttings, chases and making good in cement mortar 1:3 complete all as specified and directed.

Supply and fixing 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing grating doom 100mm dia PTMT weight 25gms complete all as specified and directed.

Supply and fixing 32mm bore waste pipe for WHB complete all as specified & directed.

Supply and fixing for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

Supply and fixing PVC (SWR) 110mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) 110mm dia bends any radius complete all as specified and directed.

Supply and fixing PVC (SWR) 75mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) 75mm dia bends any radius complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and directed.

Material and labour for for cutting 100 mm dia hole into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:4) with water proofing compound @ 3% by weight of cement finished even and smooth without extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately as supply only.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing complete all as specified and directed.

All as per srl Item no. 82 here in before but as skirting / dado over rendering 15mm thick rendering in cement mortar 1:3 complete all as specified and directed.

Material & Labour for apply two coats of oil emulsion distemper white or tinted over a coat of primer over and including plaster of paris putty of 1 mm thickness over plastered surface including preparation on walls complete all as specified and directed.

Material and labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces of walls complete all as specified and directed.

Material and labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar 1:6 of 15mm thick for laying floor finishes complete all as specified and directed.

Supply and Fixing flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nuts ; Complete all as specified and directed.

Supply and Fixing in low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin/urinal etc ; Complete all as specified and directed.

Supply and fixing 75mm PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

Material and Labour for salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing ; Complete all as specified and directed. (Excavation & earth work and PCC shall be measured and paid for separately)

Material and Labour for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe ; Complete all as specified and directed.

Material and labour cutting into existing manhole for connecting new drain pipe of 150 mm bore and making good the pipe and rendering disturbed surface where drain pipe have been inserted cutting out existing benching for forming branch channel (1/2 round or 3/4 round as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required ; Complete all as specified and directed.

Supply and fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregates) for filling chowkhat and tarring to inner surface to hold fasts (surface in contact with concrete/brick surface) of chowkats and hinges including a coat of red oxide primer complete all as specified and directed.

Material and labour for PCC 1:2:4 , type B-0 (using 12.5 mm graded crushed stone aggregates) in bed blocks for hold fast and similar nature of works complete all as specified and directed.

Supply and fixing factory made 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side in cup board shutters including a coat of pink primer complete all as specified and directed.

Supply and fixing 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats including a coat of pink primer complete all as specified and directed.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 as per existing size including a coat of red oxide primer complete all as specified and directed.(Sheet glass and painting shall be measured and paid Separately).

Material and labour for box type steel window, ERW hollow P-Section size 60mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes for hold fast block including a coat of red oxide primer complete all as specified and directed comprising of following:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass, wire mesh and painting shall be measured and paid seperately.

Supply and fixing sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour for two coats of synthetic enamel painting on newly wooden surfaces of any description over 10 cm in width or girth not otherwise described above including prepration of previously untreated surfaces complete all as specified and directed.

Material and labour for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces complete all as specified and directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including bitumen primer, cleaning surfaces etc. complete all as specified and as directed.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms complete as per manufacturers instructions all as specified and as directed.

Material and Labour for providing 40mm thick brick tiles, laid on and including 15 mm thick screed in cement mortar 1:4 and joints grouted and pointed flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed.

Supply and fixing powder coated anodised aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed.( Min. thickness of powder coating 50 micron)

Supply and fixing powder coated aluminium anodised glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) complete all as specified and directed. ( Glazing and micron film shall be measured and paid for separately)

Supply and fixing anodised Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.(Min. thickness of powder coating 50 micron). ( Glazing and micron film shall be measured and paid for separately)

Supply and fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.

Supply and fixing door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make-Godrej, Link, Harrison.

Supply and fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions including preparation of new surfaces & applying two coat of OBD over a coat of primer and chalk whitening on ceiling surface complete all as specified and directed.

Supply and fixing 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc.complete all as specified and directed.

Material and labour for for TMT bars mild steel bars, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with claps quality conforming to Fe-500D complete all as specified and directed.

Material and labour for 75 mm thick, plain cement concrete 1:3:6, type C-1 using 20 mm graded crushed stone aggregates, laid in 1:20 slop as in Plinth protection/paving/shafts including making joints at 3.00 m intervals and at each corner, the joint shall be filled with mastic filling to full depth comprising of one part heated hot below bitumen 85/25, two parts heated sand (by volume), surface fininshed fair and even witout using extra cement complete all as specified. Note : The concrete shall be laid at a strech not exceeding 3 m in legth and width of joint shall not more than 12mm complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified directed.

Material and labour for preparing New plastered surfaces applying two or coats of 100%Premium acrylic emulsion paint having VOC less than 50 Gm/litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coats of exterior priomer applied @ 0.90 litrs/10 Sqm over new surfaces complete all as specified directed.

Material and labour for 100mm thick plain Cement Concrete 1:4:8 type D2 using (40mm graded crushed stone ) aggregate as in sub base complete all as specified directed.

Material and labour for for 40mm thick Cement Concrete 1:2:4 type B1, (20 mm graded aggregate) as in flooring surface fininshed even and smooth witout using extra cement complete all as specified directed.

Supply and fixing 4.00 mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane complete all as specified directed.

Supply and fixing vitreous china squating pan ''Orissa pattern size 580 x 440mm white with integral foot rest (excluding, flushing cistern ) squating pan including connection ''P'' trap and to flushing pipe complete.

Supply and fixing in repair Vitreous China urinals, Fullstal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and wastage pipe and , pointing around urinal back in cement; complete all as specified and directed

Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified & directed.

Supply and fixing 500 Litres Rotatioal moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in postion, complete all as specified directed.

Supply and fixing 20mm stop valves, cast copper alloy, screwed down, high pressure, fancy type chromium plated, screwed, both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed

Supply and fixing PVC (SWR) vent cowl equal or unequal for 110mm dia bore as specified and directed.

Supply and fixing PVC gully traps square of size 125mm x 110mm including for setting and jointing to drain with cement mortar 1:1 etc complete all as specified & directed.

Material and labour for for 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars internal dia, inculding demolition of same, complete all as specified and directed.

Material and labour for for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW / RCC NP-2 pipe complete all as secified and directed.

Material and labour for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, partiotion of urinal and like and set in cement mortar (1:4) 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as secified and directed.

Material and Labour PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate ) for Damp proof course to horizontal or vertical surfaces including necessary formwork 40mm thick ; Complete all as specified and directed.

Supply and fixed steel window or ventilators, fixed type with glazing bars ; including a coat of red oxide primer Complete all as specified and directed.

Supply and Fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane ; Complete all as specified and directed by Engineer - in - Charge.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone agg in coping including necessary form work, weathering slightly rounded or chamfered angle and throating as directed.

Supply and fixing framed work as in doors or gates of angle or other section section with gusset plates, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as secified and directed.

Supply and fixing Steel work in tubular trusses , posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as secified and directed.

Material and labour for PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete of post holes complete all as specified and directed.

Supply and fixing for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor with door shutter over lenth of cover plate150mm.

Supply and fixing Brass Mortice loc 4 levers, vertical type, size 100 mm complete all as specified and directed

Supply and fixing 100mm dia CP grating with or without hole type complete all specified and directed.

Material and Labour for modular concealed point wiring for the following point (using red, black, green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through with and including PVC concealed conduit with all fittings and accessories i.e. bends, hooks, elbows, junction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wal , including inner and outer plates ( cover plate) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cuttings chases in walls, flooors, ceilings as required and making good disturbed surfaces with cement mortar (1:3) complete all as specified and as directed for the following :- Note : 1. Switch/socket/ceiling rose/lamp holder/regulator etc. shall be measured and paid for separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way

b). For one three pin socket outlet 5 Amps independent board

c) For one three pin 5 Amps socket outlet on the same board with other switches

All a per item No 141 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.

Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified and directed.

Supply and fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed.

Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and directed.

Supply and fixing vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed including following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

Supply and fixing sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing MCB Singe core 6 to 32 Amps complete all as specified and directed.

Supply and fixing 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.

Supply and fixing ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, copper wound dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan all as specified and directed. Note: Material and Labour for Making suitable opening as required for fixing air fan shall be deemed included in the quoted rate of item.

Supply and fixing Exhaust fan of size 350mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply copper wound , dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Note: Material and Labour for making suitable opening as required for fixing exhaust fan shall be deemed included in the quoted rate of item.

Supply and fix LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and fix in repairs LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.

Supply and fixing ceiling mounting fitting LED type 36 watt light fitting 2'x2' fixed in ceiling including PVC copper wire of required length from ceiling rose to fitting including all accessories complete all as specified and as directed.

Supply, laying and testing 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in trenches, drawn through pipes below road etc stranded conductor flatr 6 sqmm 2 core cable allas specified and directed (Excavation Earth work, sand cushioning, protection pipe, brick covering as required shall be measured and paid for separately.

Supply and fixing Sub main wiring with two Singe core 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and fixing , Sub main wiring with two Singe core 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and laying double wall corrugated (DWC) high density, polyethylene (HDPE) pipe of size 20mm dia including necessary fitting etc, PN4 rating, pressure 6 kgf/cm2 conforming to IS-16205 (Part -24) with high ring stiffness and cursh resistance capacity etc laid in trenches for protection of cable , complete all as specified and directed.

Material and labour for sand cushioning in trenches for cable protection including necessary punning and consolidation as required, complete all as specified and directed (punned thickness 18cm will be measured for payment).

Supply and laying burnt bricks sub class 'B' old size for cable protection in trenches, complete all as specified and directed.

Supply and fixing BLDC ceiling fan 1200mm sweep, remote control, BEE five star rated, energy effeceint superior quality , anti rust , single phase 240 Volts including regulator of suitable size complete all as specified and directed.

Material and Labour earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm, , complete all as specified and directed.

Munish Kalia (BID ID -3351738)

NU DOLPHIN ENTERPRISES (BID ID -3350100)