PROVN OF RCC DRAIN FOR VARIOUS LOCATION AT ACE AND PROVN OF SECURITY WALL AT SINGLE JCO QUARTER FOR EB-114, EB-115, EB-116 AND EB-117 UNDER GE(AWC) MHOW

Amount

Excavation in trenches not exc 1.50 M wide and not exceeeding 1.50M in depth for foundation's soft well as its manhols, pier hales etc n exc 10 Sqm on plan and not exc 1.50m in depth and getting out in any kind of soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 mm graded stone aggregate as in foundation. Filling & mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' modular clay brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per item No. 3 above but built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, and surfaces finished even and fair complete all as specified.

All as per item No. 5 above on other than fair faces of brick work.

M&L rendering 15mm thick in CM 1:4 in two layers (10mm under layer and 5mm finishing layer) on brick or concrete surfaces finished even and smooth without using extra cement all as specified mixed with and including water proofing compound (Both layers).

M&L for preparation of surfaces with white cement base putty and applying one coat of exterior weather proof water base emulsion paint n walls complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified.

M & L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Ditto as item no.10 but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders

Ditto as item no.10, but 6mm to and including 8mm dia

Use and waste form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed.

Use and waste form work to sides of columns and similar work with fair finished surface complete all as directed.

Use and waste form work to sides of beams and soffit with fair finished surface complete all as directed.

Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25 (Design Mix) for walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters buttress complete all as specified and directed.

M & L for RCC M-25 (Design Mix) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F Joist ,channel, angle or tee, square or rectangular tubler sections fixed independently or as purlin, rafter or post incl cutting to dead length where required notching drilling firing riveting and/or welding or connecting with bolts and nuts providing and fitting angle cleats fish plates, gusset plates etc complete all as specified and directed (Fe-410-W (gde-E-250) quality A)

APconstruction (BID ID -3090090)

ram prashad chotelal batham (BID ID -3095145)

m/s ajay chandil (BID ID -3095551)

J B CONSTRUCTION AND DEVLOPERS (BID ID -3089615)

M/S UnitedConstruction (BID ID -3083915)

M/S GARG CONSTRUCTION (BID ID -3095482)

PREMCHAND BHAWANI SAHAI (BID ID -3091432)