Loading…
Loading…
Tender Value
₹3.0 Cr
EMD Value
₹6.1 L
Closing Date
15 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN (Unique Document Identification Number), failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference. Ref: GM (ENGG) HJP letter No- ECR-HQ0ENGG(CONT)0009/2025Dtd 18.11.2025)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited 1) Three similar works each costing not less than the amount equal to 30% of advertised value of tender,or 2)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or 3)One similar work costing not less than the amount equal to 60% of advertised value of the tender. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity
Similar Nature of work-Supply and/or installation and commissioning of Fire Detection and Alarm system by OEM or Authorized representative of OEM to any Government organization and/or PSUs.. OR Any work involving indoor signaling work where "Fire detection and Alarm system" is a part of the work. Ref: (ECR/HJP letter No- ECR-HQ0SnT(SNW)/1/2020 (Computer no- 81849) Dtd 19.05.20206
31 conditions · 9 needing a document upload
The tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society /registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and thenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm andThe tenderer whether sole proprietor, a company or a partnership firm / joint venture (JV) / registered society / registered trust etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co-ordinate measurements through contractor's authorized engineer, witness measurements, sign measurement books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No Claim Certificate" and refer all or any disputes to arbitration. sign "No Claim Certificate" and refer all or any disputes to arbitration.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond in favour of FA & CAO/ECR/HJP shall be as per Annexure VIA and shall be valid for a period of 90 days beyond the bid validity period. { Advance correction Slip No.- 11 to Indian Railways Standard Conditions of Contract, April.2022 Authority: Railway Board letter No2022/CE- I/CT/GCC-2022/POLICY/Pt.I(E- 3320424 New Delhi Dtd. 13.03.2026}
If the firm intended to submit BG for Bid security then, the original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids) (As Per Rly. Bds Letter No. 2022/CEI/CT/GCC- 2022/Policy dated 20.10.203, Advance Correction Slip No. 5 & Railway Board letter No- 2022/CE-I/CT/GCC2022/POLICY/Pt.I(E- 3320424 New Delhi Dtd. 13.03.2026 Advance Correction Slip No. 11).
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / company / Joint Venture (JV) / Registered Society / Registered Trust etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) In case tenderer is other than sole proprietorship firm, following documents shall be submitted by the tenderer: (a) Partnership Firm: The tenderer shall submit (i) a notarized copy of Partnership Deed or a copy of partnership deed registered with the registrar. (ii) a copy of Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. (b) Joint Venture (JV): The tenderer shall submit documents as mentioned in Clause 17 of the Tender Form (Second Sheet). (c) Company registered under Companies Act-2013: The tenderer shall submit (i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (d) LLP (Limited Liability Partnership) Firm: If the tender is submitted on behalf of a LLP Firm registered under LLP Act-2008, the tenderer shall submit alongwith the tender- (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (e) Registered Society & Registered Trust: The tenderer shall submit (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture /Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society etc. shall be neither asked nor considered, if submitted. (v) A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor
The successful bidder shall have to submit a Performance Guarantee (PG) amounting to 5% of the original contract value and Additional Performance Guarantee of 5% if applicable as per clause 16(a)(h) of GCC-2022 which is attached as advance correction Slips of GCC-2022 separately in NIT.
If the firm submit Bank guarantee against either Bid security at the time of bid or PG after award of work , they should submit Swift copy of SFMS of the concerned BG duly issued from the concerned bank , otherwise the BG will not be received. Authority: Railway Bd Letter No- 2025/F(X)-II/10/14 New DelhiDtd. 17.10.2025.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Tenderers are required to scrutinize carefully all clauses appearing in the Tender documents before uploading their bid
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under
In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to two years
Railways reserves its right to either cancel the tender or reject any or all the tenders without assigning any reasons thereof
General Conditions of the Contract (GCC), April 2022 with latest amendment/ correction slips is applicable and final authority for this contract in case of any conflict or confusion. The contract shall be governed by the provision of Indian Railways Standard General Conditions of Contract-2022 (Latest) with correction slips up to the date of uploading of tender.
The firm must entry of details of numbers of engaged labours (skilled or unskilled) , ESIC & PF deduction if applicable) , must be updated on IR- Shramik Kalyan portal at the time of execution of work. Without uploading of these documents running bill of concerned period will not be processed.
Firm must submit details of Graduate/diploma engineers or equivalent employed by the firm against this work with relevant certificate within two weeks of issue of LOA/before making of agreement Other wise any bill will not be process and LD will be imposed as described in tender Document
No payment will be initiated till all the conditions regarding Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract. It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & real payments made thereof after each wage period on Shramik Kalyan portal.
Item wise inspection clause has been given in the schedule .However, modification may be done at the time of issue of LOA
The firm must follow the instructions regarding precaution taken during trenching/digging work ( if done ) which is mentioned in the JPO issued dated 21.05.2024. The JPO has been attached in Tender document.
It is mandatory to followed provisions under Make in India policy 2017 issued by Govt. of India, as amended from time to time
If the firm submit Bank guarantee against either Bid security at the time of bid or PG after award of work , they should submit Swift copy of SFMS of the concerned BG duly issued from the concerned bank , otherwise the BG will not be received. Authority: Railway Bd Letter No- 2025/F(X)-II/10/14 New DelhiDtd. 17.10.2025.
After inspection, supply of any active materials will not be received by consignee without respective OEMs warranty certificate
The firm has to submit RECEIPT CERTIFICATE having all the information for each supplied items in S&T/store in the prescribed Performa -Z attached at para No- 40 ( Payment clause ) in the tender document. Without submission eMB will not be initiated
Provision of RDSO approved make aspiration type fire alarm system for replacing Non-RDSO Fire alarm system at 30 station under Danapur Division.
DNRSnTSig2026-6
DNRSnTSig2026-6
Open
Works - General
9 Months
Patna, Bihar
₹0
₹6.1 L
15 Jun 2026
21 May 2026
1 Jun 2026
35 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,04,37,104 | ||
| — | — | — | Above/ 4141740.00 Below/P | ||
| "Supply, Installation, Testing & Commissioning of Networkable Single loop addressable Fire alarm Control panel expandable upto 2 loops & interface with GSM/LTE module working as per RDSO/SPN/217/2025 ver-3.1or latest. The control panel shall be networkable to Zonal /Divisional Headquarters preferably over TCP lP/OFC media converter and shall have clock synchronization facility. This schedule includes supply of TCP IP converter/ Networking card/OFC media converter. The control panel shall have provision of Graphical software to enable remote monitoring of entire fire detection and alarm system of a station from Head Quarters. The control panel shall be designed to work on power supply of 110V/230V AC as well as on DC battery backup of adequate capacity to work upto 24 hrs. Backup. The Power supplies like batteries and chargers shall be supplied by the contractor. The Control Panel shall have means for the user to visualize and interact with the complete Automatic Fire Detection and Alarm System layout through a user- friendly software executable on a standard Windows based Personal Computer. It shall be possible to download data and extend alarms from Control Panel through suitable ports like RS485/RS232/USB/TCP/IP into a PC/Laptop available with SSE at the installation and remote location (Divisional Control room) operating on Windows platform. The software for downloading and analysing fault data shall be provided & shall be compatible with the latest windows operating system. Detection, actuation, and control system shall have provision for automatic as well as manual operation. The control panel should have provision to connect a GSM/LTE module duly providing compatible SIM with SMS facility on minimum of 5 numbers (users). Note: Spare cost is also included& to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 9854070.00 Below/P | ||
| "Supply, Installation, testing and commissioning of laser or high power LED based Aspiration detection unit for AC room with programmable 4 stage alarm generation and with 4 addressable modules. It should have auto cleaning facility in optical chamber, electronic discrimination of particle size or other listed methods or combination thereof. The aspiration system shall also include external power supply unit with battery backup as per OEM. The aspiration type smoke detector should be UL/LPCB/Vds/ FM listed/approved and shall comply tospecification Nos. RDSO/SPN/217/2025ver- 3.1 or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 2414400.00 Below/P | ||
| "Supply, installation testing & commissioning of Heat and smoke multi sensor with inbuilt fault isolator (open/short circuit in loop) as per specification Nos. RDSO/SPN/217/2025 ver- 3.1 or latest and required to be provided at suitable locations inside the diesel generator room, battery room, ASM room, power equipment room, B96 non air conditioned RR, CCTV control & equipment rooms, way side OFC room and other S&T service rooms as directed by the Railway site Engineer. The location of fixing is to be meticulously decided so that full advantage of the system is achieved. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection- Supply RDSO" | — | 600.00 | — | — | |
| — | — | — | Above/ 251940.00 Below/P | ||
| "Supply, Installation, Testing & commissioning of Audio Visual alarm (Hooter and strobe) controlled through addressable control model. It shall be preferably flashing type Red/White colour. It shall be preferably with Piezoelectric type sounder. The sound level shall be preferably adjustable type up to 90 dB at a distance of 1Mtr as per specification No. RDSO/SPN/217/2025 ver- 3.1 or latest. Note: Spares cost are also included & to be supplied as per RDSO para Nos. 4.15 or latest Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 154350.00 Below/P | ||
| "Supply, Installation and Testing, commissioning of Addressable and resettable Manual call point with inbuilt fault isolator (open/short circuit in loop) status LED for alarming & standby mode as per specification Nos. RDSO/SPN/217/2025ver- 3.1 or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 1839750.00 Below/P | ||
| Supply, Installation, Testing and Commissioning of UL/FM/Vds/LPCB approved/listed resettable UV/IR Type flame detector for diesel oil storage room with required module to communicate on main fire alarm panel. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO | — | 30.00 | — | — | |
| — | — | — | Above/ 200160.00 Below/P | ||
| "Supply, Installation, Testing and Commissioning of resettable Probe type bimetallic Heat and all other accessories for diesel generator encloser as per RDSO Specification Nos. RDSO/SPN/217/2025 ver- 3.1 or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 2786460.00 Below/P | ||
| "Supply, installation, testing & communication of Linear Heat Sensing (LHS)/Linear Heat Detection (LHD) Interface module with all accessories for integration with main line fire alarm control panel as per RDSO specification Nos. RDSO/SPN/217/2025ver- 3.1 or latest. It should be UL/FM/Vds/LPCB approved/listed. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 479700.00 Below/P | ||
| Supply, Installation Testing and commissioning of Analogue type Linear Heat Sensing cable/Linear Heat Detector hollow metallic pneumatic tube type with required module to be integrated on main Fire Alarm Panel as per specification Nos. RDSO/SPN/217/2025ver- 3.1 or latest. It shall be laid in all cables tray located in power equipment room, relay room & telecom room and should be UL/FM/Vds/LPCB approved/listed. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO | — | 900.00 | — | — | |
| — | — | — | Above/ 316440.00 Below/P | ||
| "Supply, Installation, Testing, Commissioning of Auto Telephone Dialler (GSM) Module to send the prerecorded message, fire and fault massage, to multiple mobile numbers, programmed earlier, complying to the RDSO/SPN/217/2025ver- 3.1or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 1034400.00 Below/P | ||
| "Supply of Power supply System 24 V/2 Amp or other rating as per OEM with built in Charger with battery backup as per specification Nos. RDSO/SPN/217/2025ver- 3.1or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest.Inspection-Supply RDSO" | — | 30.00 | — | — | |
| — | — | — | Above/ 507000.00 Below/P | ||
| "Supply, Installation Testing and commissioning of FRLS/Fire Survival Circuit Integrity Cables of size 2C X1.5 Sq. mm with all accessories certified by UL/FM/Vdc/LPCB/ BRE global or any recognised Lab by GOI for connection of Fire Alarm devices specification Nos. RDSO/SPN/217/2025ver- 3.1or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 3000.00 | — | — | |
| — | — | — | Above/ 1221600.00 Below/P | ||
| "Supply, Installation, Testing & Commissioning of UL/LPCB/Vdc listed/approved Pipe made of CPVC with suitable diameter & pipe accessories (couplings, unions, elbows, tees, end caps, capillary tubes, sampling ports, mounting brackets etc.) as per requirement for the Aspiration detection shall comply to RDSO/SPN/217/2025ver 3.1or latest. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 1200.00 | — | — | |
| — | — | — | Above/ 1535500.00 Below/P | ||
| Supply, Installation, Testing and Commissioning of Addressable Multi detector combination of heat cum smoke, with isolator base binary coded address setting. Dual LED's for 360 degress visibility.Sleek low-profile housing design. Regular 100mm base. IP Rating : IP -42. Approval: UL listed, (As per RDSO Specification No.RDSO/ SPN/ 217/ 2021 ver 3.0 or latest Inspection-Supply RDSO | — | 250.00 | — | — | |
| — | — | — | Above/ 2640500.00 Below/P | ||
| Supply of CO2 Fire extinguisher 4.5 kg capacity confirming to IS 15683: 2018 or latest with ISI mark provided with all fittings and accessories. Inspection-Consignee | — | 500.00 | — | — | |
| — | — | — | Above/ 308300.00 Below/P | ||
| Supply of Fire ball as per specification (i) To be used for extinguishing fire with very less time of 3-5 Sec, (ii) Shelf life- Minimum 05. Yrs., Item Weight: 1.3 Kg (Min) (iii) It should have a stand for keeping it.Warrantee/Guarantee: As per OEM,(V) GC/TC to be submitted along with the materials. Make: AFO, Elide fire or better. Inspection-Consisgnee | — | 250.00 | — | — | |
| — | — | — | Above/ 750794.00 Below/P | ||
| "Supply, installation, configuring, testing and commissioning of remote monitoring software (GUI) along with license for Min. 20 addressing control panels as per RDSO/SPN/217/2025ver- 3.1or latest. This includes necessary gateway card and network interface card for the system fully functional as desired by railways. Note: Spare cost is also included & to be supplied as per RDSO para Nos. 4.15 or latest. Inspection-Supply RDSO" | — | 2.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC 2022
ATTACHMENT
mastertenderdocuments.pdf
ATTACHMENT
JPOEarthworkdtd21.05.2024.pdf JPO for earth work
ATTACHMENT
ACSGCCcorrectionsliplatest.pdf Correction Slips of GCC 2022
ATTACHMENT
GCC_April-2022_2022__GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
JPOEarthworkdtd21.05.2024.pdf
ATTACHMENT
ACSGCCcorrectionsliplatest.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .