Tender ID

Karnataka

Retender

Works

Water supply/sewage lines

DETAILED PROJECT REPORT FOR PROPOSED CONSTRUCTION OF MATERIAL RECOVERY FACILITY (MRF) UNIT IN UJJINI VILLAGE KOTTUR TALUK VIJAYANAGARA DIST.

Rural Drinking Water and Sanitation Department

RWSSD Division Office Vijayanagara | Karnataka

Amount: ₹1.5 CrCloses: 25 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published8 Oct 2024
Closed25 Oct 2024
Retendered8 Oct 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 8 Oct 2024

Tender Value

₹1.5 Cr

EMD Value

₹2.3 L

Closing Date

25 Oct 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

SHIVAREDDY

Mobile Number

Work Description

WATER SUPPLY

Tender Information

Tender ID

RWSSD/2024-25/WS/WORK_INDENT8539

Reference Number

RWSSD/2024-25/WS/WORK_INDENT8539

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Vijayanagara

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredValid PWD LICENCE Copy

RequiredGST & PAN REGISTRATION CERTIFCATES

RequiredOngoing commitments

RequiredSatisfactorily completed at least 90 Percent of the estimated value of contract, in the last five years i.e. 2019-20-2023-24 as prime contractor, at least one similar Water supply project of value not less than Rs. 76.88 Lakhs usually not less than the 50 Percent of estimated value of contract.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-2020 to 2023-2024 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only Trun over certificate issued by CA along with UDIN of Rs. 307.50 lakhs

RequiredExecuted in any one year, the following minimum quantities of work. 1.Earth work in all sort of soils 915.45 cum, 2. Cement Concrete 183.78 cum, 3.TMT Steel 5.84 Tonne, 4.Tubular Trusses or ISMB or Trusses 49369.74 Kgs the quantity could be in one or more contracts. However it has to be in one financial year.

RequiredLiquid assets and /or availability of credit facilities of not less than Rs. 77.00 Lakhs Credit lines/ letter of credit/ certificates from Nationalized/ Scheheduled banks for meeting the fund requirement etc.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government I Goverment of India /Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1 percentage of the bill amount will be deducted towards Construction Labour Welfare fund.

All rates shall be exclusive of GST, but inclusive of Rovalty for minor minerals, Karnataka Building and other Construction Workers Welfare Cess), shall be included in the rates, prices and total Tender Price submitted by the Tenderer.

The rates quoted by the Contractor shall be exclusive of GST. The Emplover will perform such duties in regard to the deduction of such taxes at source as per applicable law

Conditional tenders will not be accepted

GST will be paidseparately

GST will be paid excluding the quotation rates as per the approved quotation

The work will be inspected by the Third Party and the bill will be admitted only after the satisfactory reportfrom the third party along with GPS photos.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding vear (both days inclusive).

The Employer reserves the right to reject any or all Tenders without assigning a n y reason.

The Tenderer should maintain the scheme during the defect liability period i.e., one yearfrom the date of completion.

The Department is not responsible for any delay in accessing e-procurement portal.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3- Oualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will be considered for evaluation.

The Tenderer shall scan &upload all the original documents required for this bid to the e-procurement portal. The Original Documents should be produced at the time of opening of Bid for physical verification.If necessary.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.,

Period of completion is as mentioned in the bid document, which includes rainy season.

The contractor should follow termsand conditions asspecified in standardbid document wherever is applicable

The contractor should submit quality control reports and GPS photos along with the bill otherwise bills will not be accepted.

Bidder should quote the rate excluding GST amount

The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

The Tenderer at his own responsibility and risk is required to visit and examine the Site of Works and its surroundings and obtain all information that mav be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderer own expense.

Bidder should possess unconditional Credit Line Facility of Liquid assets and /or availability of credit facilities of not less than Rs.77.00 Lakhs (Estimated cash flow for 3 months of peak construction period) (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.)

Conditional LOC will not accept.

Annual turnover for the past five/ relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible along with UDIN number andshould be active

The documents which are uploaded by the bidder should be wel scanned.

All documents related ot bid document are ot be submitted mandatorily

Corrigendum s modifications correction, if any, will be published in the website only

If any date in the tender time table si government holiday, next working date will be considered

Pipes which are used for the work are tested by CIPET and CIPET report is must for the paymentand CIPET payment shall be made by thecontractor

After completion of the FHTC and HTC work, the work is to be handed over to the gram panchayat for its further maintenance

Final bill will be admitted only after the submission of 3rd party report, handing over certificate and completion report with the work display board

Bidders are bond the guidelines / instructions issued time to time from the government

This tender is covered under World Bank Guidelines on preventing and combating fraud and corruption in program for results financing dated February 1 2012 and revised O 1 Julv 10 2015 https ppfdocuments.azureedge.net 3682 pdf. Requirements under these guidelines include but are not limited to 1st theborrowers obligation on informing the World Bank about all fraud and corruption related allegation and investigations, 2nd the World Banks right to conduct administrative inquires, and 3rd Ineligibility of debarred firms for contract awards. The latest list of t h e banks debarred firms is available https www.worldbank.org en projects-perations procurement debarred firms

If the bidder fails to complete the work within the timeline fixed by the department, then, those tenderes EMD/ FSD.will be forfeited and the contract will be rescinded at his risk and cost

Conditional Turn over will not be accepted

All terms and conditions as per Bid Document

Technical Criteria

General

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

Past Experience

Satisfactorily completed at least 90 Percent of the estimated value of contract, in the last five years i.e. 2019-20-2023-24 as prime contractor, at least one similar Water supply project of value not less than Rs. 76.88 Lakhs usually not less than the 50 Percent of estimated value of contract.

Work Done Certificate

Capabilities of Vendor

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-2020 to 2023-2024 Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only Trun over certificate issued by CA along with UDIN of Rs. 307.50 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

Liquid assets and /or availability of credit facilities of not less than Rs. 77.00 Lakhs Credit lines/ letter of credit/ certificates from Nationalized/ Scheheduled banks for meeting the fund requirement etc.

Line of Credit

Others

Valid PWD LICENCE Copy

PWD Registration Certificate (Class I/II/III/IV)

Executed in any one year, the following minimum quantities of work. 1.Earth work in all sort of soils 915.45 cum, 2. Cement Concrete 183.78 cum, 3.TMT Steel 5.84 Tonne, 4.Tubular Trusses/ISMB/Trusses/ : 49369.74 Kgs the quantity could be in one or more contracts. However it has to be in one financial year.

Work Done Certificate

Ongoing commitments

Others -- Certificate

GST & PAN REGISTRATION CERTIFCATES

GST Registration

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,850

EMD Fee Amount

₹2.3 L

Important Dates

Last Activity

8 Oct 2024

Published

8 Oct 2024

Bid Opening

28 Oct 2024

Download Ends

24 Oct 2024

Pre-Bid Meeting

21 Oct 2024

BOQ Preview

•

DETAILED PROJECT REPORT FOR PROPOSED CONSTRUCTION OF MATERIAL RECOVERY FACILITY (MRF) UNIT IN UJJINI VILLAGE KOTTUR TALUK VIJAYANAGARA DIST.

•

BUILDING CIVIL WORKS : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by r...

•

Footing:-Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes mac...

•

Additionalities for Formwork, Centering & Scaffolding 8% for footings. CSR 2023-24 Addendum I P.No 111

•

Columns-Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes mach...

•

Additionalities for Formwork, Centering & Scaffolding 70% for Columns. CSR 2023-24 Addendum I P.No 111

•

Plinth Beam-Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...

•

Additionalities for Formwork, Centering & Scaffolding 50% for Beam. CSR 2023-24 Addendum I P.No 111

•

Additionalities for Formwork, Centering & Scaffolding 10% for Earth Retaining Structure CSR 2023-24 Addendum I P.No 111

•

Beam,Lintel & Roof-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ...

•

Additionalities for Formwork, Centering & Scaffolding 50 % for Roof slab & Staircase CSR 2023-24 Addendum I P. No. 111

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800Kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS21...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800Kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS21...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing Factory made single extruded wood polymer composite (wpc) Soild dooe/window, clerestory windows & frames /chowkhat of frames size 65x125mm

•

Providing & fixing factory made 100% Carpenter friendly ready to use solid plain wood polymer composite (WPC) Flush shutter of 35mm thickness which is anti terminate and having high water absorption p...

•

Providing and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elas...

•

Providing and fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and l...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 Kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 m...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm(+ 0.05 %) total coated thickness with zinc coating 120 gra...

•

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch12.80.1

•

WATER SUPPLY AND SANITATION WORKS : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and fixing brass bib cock of approved quality 20 mm nominal bore

•

Providing and fixing brass stop cock of approved quality :

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40mm Dia Nominal Bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50mm Dia Nominal Bore

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm Dia Nominal

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm Dia Nominal

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25mm Dia Nominal Bore

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32mm Dia Nominal Bore

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore

•

Providing and fixing chorinated poly veny chloride (CPVC) pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, i/c fixing the pipe with ...

•

Providing and fixing chorinated poly veny chloride (CPVC) pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, including fixing the pipe...

•

Providing and fixing chorinated poly veny chloride (CPVC) pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings. This includes jointing of...

•

Providing and fixing gun metal non- return valve of approved quality(screwed end) 50 mm nominal bore

•

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointimg with seal ring conforming to IS: 5382, leaving 10mm gap for termal expansi...

•

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mm

•

C.P brass piller tap elbow operated for sinks (GEM Rate)

•

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

•

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

•

Providing and fixing PVC S.W.R Nahani Trap 10cms x 10cms with allfitting arrangements & all necessary accessories complete

•

Providing and placing on terrace(at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Supplying and fixing of 2/1.5 H.P. Monolbock Pump of approved make with all accessories conforming to ISI specification including cost of all materials, labour, with all lead and lift etc. complete as...

•

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushingcistern, with fittings, standard size C.P. brass flush pipe, spreaders wit...

•

ELECTRIFICATION WORKS : PVC Conduit Pipes : Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive past...

•

PVC Conduit Pipes : Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running befo...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 180x90x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200x90x65mm

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200x200x65mm

•

Supplying and fixing PVC/metal conduit Deep junction box. 19/20mm Deep Junction Box

•

Supplying and fixing PVC/metal conduit Deep junction box. 25mm Deep Junction Box

•

Extra for Grove Cutting : Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm Condu...

•

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...

•

Modular Switches/Sockets/Regulators etc : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way

•

Modular Switches/Sockets/Regulators etc : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way

•

Modular Switches/Sockets/Regulators etc : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch

•

Modular Switches/Sockets/Regulators etc : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch

•

Modular Switches/Sockets/Regulators etc : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

•

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts,50Hz AC supply & completely wired on existing box.

•

Star Delta Starter : Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enc...

•

Miniature Circuit Breakers : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

•

MCB Distribution Boards : Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type ca...

•

III - Double Door. 4 Way TP&N

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying 250 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with I...

•

Trivector Meter : Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and compl...

•

Earth Electrode for Grounding : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr lo...

•

1.1 KV LT UG Cable : Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip th...

•

Labour Charges : Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

•

Wooden/Aluminum Rollers as directed by the departmental staff. 35 to 95 Sqmm.

•

Digging of Trench : Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc.,complete.(As per Civil SR KSRB I-2, P-7). In Soil (Ordinary)...

•

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

•

LT Pot Heads : Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable. Up to 4C x 50 Sqmm.

•

Exhaust Fans : Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete. ALMONARD. 12" Sweep (300mm).

•

Wall mouting Fans : Supplying wall mounting fan suitable to operate at single- phase 230v AC. Supply ALMONARD. 400 mm Sweep.

•

PVC Batten with LED Tubes Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percentage lumen maintenance with CRI Grater than ...

•

LED Down Lights Supply of round or square recess or surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to ma...

•

Fluorescent Tubes : Supplying and fixing of 5'-80 Watts of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating. Operating voltage range from 180V to 265V...

•

Patty Type Fittimg : Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50H...

•

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin

•

Fixing all type of Luminaries : Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.007...

•

Fixing of Fan : Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with...

•

Fixing of Exhaust Fans : Fixingoneexhaustfanaftermakingasuitablenotchinthewallandfinishingwithcementmortarandcolouringtomatchtheexistingwallorbrackets,withboltsandnutsanda5A,ceilingrosewithsufficientl...

•

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound., with all lead, lifts, loading, un-loading charges, including cost of all materials, c...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. 125 Amps 25kA.

•

LED Streetlights Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injecti...

•

Turbo Ventiltors (GEM Rate)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

LINE OF CREDIT FORMAT.docx

Tender Document • 0.01 MB

mrf.doc

Tender Document • 0.91 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Water supply/sewage lines

DETAILED PROJECT REPORT FOR PROPOSED CONSTRUCTION OF MATERIAL RECOVERY FACILITY (MRF) UNIT IN UJJINI VILLAGE KOTTUR TALUK VIJAYANAGARA DIST.

Rural Drinking Water and Sanitation Department

RWSSD Division Office Vijayanagara | Karnataka

Amount: ₹1.5 CrCloses: 25 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published8 Oct 2024
Closed25 Oct 2024
Retendered8 Oct 2024