29/MGNREGS

Sub Head: Hire Charges

Hire charges of Coaltar Boiler 900 to 1400 litres

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Hire charges of Diesel Road Roller- 8 to 10 tonne

Hire charges of Derrick monkey rope

Hire charges of Pump set of capacity 4000 litres/hour

Vibrator (Needle type 40 mm)

Machine for rubbing of floors

pin vibrator

Surface Vibrator

Hot Bitumen Mixer 0.5cum i/c hand cart

Generator 250 KVA

Tractor with trolley

Water tanker 5000 Ltr. Capacity

Concrete joint cutting machine

Vibratory roller 8 to 10 tonne

Tandem Road Roller

Generator 250 KVA

Generator 100 KVA/125

Hire charges of TATA 407 or equivalent for local shifting

Sub Head: Material

Seam bolts and nuts 6 mm dia and 25 mm long

Fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick

Fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge

Fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge

Fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge

Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips

Fibre (high impact poly propelene reinforced) cement corrugated apron piece

Fibre (high impact poly propelene reinforced) cement eaves filler piece

Fibre (high impact poly propelene reinforced) cement north light curves

Non-Asbestos fibre (high impact poly propelene reinforced) cement ventilator curves

Multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick

Multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick

6 mm thick heavy duty fiber cement board

8 mm thick heavy duty fiber cement board

12.5 mm thick Gypsum plaster board

6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276

8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276

Stone Aggregate(single size):25 mm nominal size

Stone Aggregate(single size): 12.5 mm nominal size

Stone Aggregate(single size): 06 mm nominal size

Bamboo 25 mm dia 2.5 meter long

Blown type petroleum bitumen of penetration 85/25 of approved quality

Bitumen hot sealing compound : grade A

Bitumen solution primer of approved quality

Premoulded joing filler 12 mm thick

Bitumen felt fibre base (vegetable or animal): Type 2 grade 1

Coal Tar

Wire brush

Soft brush

White cement

Coal (steam)

Brass tower bolt (barrel type) 250x10 mm

Brass tower bolt (barrel type) 200x10 mm

Brass tower bolt (barrel type) 150 x 10 mm

Brass tower bolt (barrel type) 100 x 10 mm

Brass handles 125 mm with plate 175x32 mm

Brass handles 100 mm with plate 150x32 mm mm

Brass handles 75 mm with plate 125x32 mm

Brass door latch 300x16x5x mm (0.380 kg)

Brass door latch 250x16x5 mm (0.350 kg)

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Brass 150 mm floor door stopper (0.357 kg)

Brass hard drawn hooks and eyes 300 mm

Brass hard drawn hooks and eyes 250 mm

Brass hard drawn hooks and eyes 200 mm

Chromium plated Brass butt hinges (heavy) type 75x65x4 mm (200 gms)

Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm

Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm

Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm

Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm

Chromium plated Brass handles 125 mm with plate 175x32 mm

Chromium plated Brass handles 100 mm with plate 150x32 mm

Chromium plated Brass handles 75 mm with plate 125x32 mm

Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles

Chromium plated brass casement window fastener

Chromium plated Brass Night latch

Chromium plated Brass Wardrobe Knob 50 mm

Chromium plated Brass Screws 50 MM

Chromium plated Brass screw 40 mm

Chromium plated Brass screws 30 mm

Chromium plated Brass screws 25 mm

Chromium plated Brass screws 20 mm

C. P. Brass Extension Nipple (1/2"x2" size)

Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 30 mm

Bright finished or black enameled mild steel screws 25 mm

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel bolts and nuts 50x6 mm

Oxidised mild steel butt hinges 125x65x2.12 MM

Oxidised mild steel butt hinges 100x58x1.90 mm

Oxidised mild steel butt hinges 75x47x1.70 mm

Oxidised mild steel butt hinges 50x37x1.50 mm

Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm

Oxidised mild steel single acting spring hinges 150 mm

Oxidised mild steel single acting spring hinges 125 mm

Oxidised mild steel sliding door bolt 300x16 mm

Oxidised mild steel sliding door bolt 250x16 mm

Oxidised mild steel door latch 300x20x6 mm

Oxidised mild steel door latch 250x20x6 mm

Oxidised mild steel tower bolt (barrel type) 250x10mm

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel tower bolt (barrel type) 150x10 mm

Oxidised mild steel tower bolt (barrel type) 100x10 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel handles 100 mm

Oxidised mild steel hasps and staples (safety type)150 mm

Oxidised mild steel hasps and staples (safety type ) 115 mm

Oxidised mild steel hasps and staples (safety type ) 90 mm

Oxidised mild steel screws 50 mm

Oxidised mild steel screws 40 mm

Oxidised mild steel screws 30 mm

Oxidised mild steel screws 25 mm

Oxidised mild steel screws 20 mm

Anodised Aluminium butt hinges 100x63x4 mm

Anodised Aluminium butt hinges 75x63x4 mm

Anodised Aluminium butt hinges 75x45x3.2 mm

Anodised Aluminium sliding door bolt 300x16 mm

Anodised Aluminium sliding door bolt 250x16 mm

Anodised Aluminium tower bolt (barrel type)300x10 mm

Anodised Aluminium tower bolt (barrel type) 250 x 10 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Anodised Aluminium tower bolt (barrel type) 100x10 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Anodised Aluminium handles 100 mm with plate 150 x 32 mm

Anodised Aluminium handles 75 mm with plate 125 x 32 mm

Block board construction flush door with teak wood ply on both faces 35 mm thick

Block board construction flush door with teak wood ply on both faces 25 mm thick

Block board construction flush door with commercial ply on both faces 30 mm thick

Block board construction flush door with commerciial ply on both faces 25 mm thick

Square vision panel (upto 0.10sqm) in Block board construction flush door

Decorative plywood 4 mm

Fuel wood

Calcium silicate base compound for jointing calcium silicate tiles

Cement Concrete Jali 50 mm thick

Cement Concrete Jali 40 mm thick

Cement Concrete Jali 25 mm thick

Kerosene oil

Unslaked lime

Dry hydrated lime (factory made)

Marble dust/ powder

Marble chips up to 4 mm and downsize white &black

Marble chips large size above 4 mm white & black

Acrylic distemper Ist quality, having VOC content less than 50 gm/litre

Acrylic emulsion, having VOC content less than 50 gm/litre

Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre

Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre

Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Exterior primer

Dry distemper

Oil bound washable distemper/ Acrylic distemper

Linseed oil (double boiled)

Cement Primer

Distemper primer

Pink primer (for wood)

White cement based putty

Aluminium paint

Anticorrosive bituminous paint (black)

Black Japan

Enamel paint

Synthetic enamel paint in black or chocolate shade

Synthetic enamel paint in all shades except black or chocolate shade

Superior copal varnish

Green or blue medium shade pigment

Galvanised steel plain sheets

Shellac

Spirit

Spun yarn

Mild steel round bar 12 mm dia and below

Mild Steel round bar above 12 mm dia

Average rate of mild steel round bars for reinforcements

Flats exceeding 10 mm in thickness

Mild steel rivets

Mild steel bolts 6 mm dia and 25 mm long with hexagonal head

Bolts and nuts above 300 mm in length

Stone for masonry work

Stone for pitching 15 cm x 22.5 cm

Stone dust

Kota stone slab 20 mm to 25 mm thick (semi-polished)

Kota stone slab 25 mm thick (rough chiseled)

Crushed stone 2.36 mm to 12.5 mm size

Surkhi

Precast terrazzo tiles 22 mm thick (light shade)

Precast terrazzo tiles 22 mm thick (medium shade)

Precast terrazzo tiles 22 mm thick (dark shade)

G.I Limpet washer

Bitumen washer

G.I. Plain washer thick

G.I. Plain washer thin

G.I. Plain washer for seam bolts

Water proofing materials

Welding by gas plant

Welding by electric plant

Wire nails

Wire mesh (rabbit)

20 mm dia holding down bolts

Hard drawn steel wire

Mild steel flat strap fitting

Chequered terrazzo tiles 22 mm thick (light shade)

Chequered terrazzo tiles 22 mm thick (medium shade)

Chequered terrazzo tiles 22 mm thick (dark shade)

Diesel oil

Commercial LPG in cylinder

Tile fixing chemical adhesive

Cement Polymer Grout Compound

Acid for cleaning tiles

Silicon based Joint Sealeant for Tiles

Rubber base Adhesive

Bleaching powder

C.I. bracket for wash basin and sinks

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate for European type W.C.

C.P. brass chain with 32 mm dia rubber plug

C.P.brass chain with 40 mm dia rubber plug

Clamps and M.S. stays including bolts and nuts for 100 mm pipe

Brass bib-cock-15 mm dia

Brass bib-cock 20 mm dia

Brass stop-cock 15 mm dia

Brass stop-cock 20 mm dia

C.I. Cover and frame 300X300 mm inside

C.I. Cover without frame 300x300 mm inside

Vitreous china foot rests 250x130x30 mm

C.I. Grating 100x100 mm

C.I. grating 150x150 mm

C.I. grating 180x180 mm

Mirror of superior make glass 60x45 cm

vitreous china pedestal for wash basin

pig lead

G.I. back (jam) nuts 25 mm dia

G.I.back (jam) nuts 65 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Sand cast iron S & S single unequal junctions: 100x100x75x75 mm dia

Sand cast iron S&S single unequal Junction: 100x100x75 mm dia with access dor

Sand cast iron S&S double unequal junction: 100x100x75x75xmm dia with access door

Sand cast iron heel rest bend 75 mm dia

Sand cast iron heel rest bend 100 mm dia

S.C.I hand pump

R.C.C. pipes NP2 class 300 mm dia

R.C.C. pipes NP2 class 450 mm dia

R.C.C. pipes NP2 class 600 mm dia

R.C.C. pipes NP2 class 900 mm dia

R.C.C. pipes NP2 class 1000 mm dia

R.C.C. pipes NP2 class 1200 mm dia

RCC pipe 450 mm dia NP -3 spigot

RCC pipe 450 mm dia NP- 4 spigot

Stoneware pipes grade A (60 cm long ) 200 mm dia

Stoneware pipes grade A (60 cm long)230 mm dia

Stoneware pipes grade A (60 cm long) 250 mm dia

Shower rose C.P brass for 15 to 20 mm intel 100 mm dia

Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia

Spun yarn

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 32 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

Brass full way valve with C.I. wheel (screwed end) 50 mm dia

Brass full way valve with C.I. wheel (screwed end) 65 mm dia

Brass full way valve with C.I. wheel (screwed end) 80 mm dia

Vitreous China angle back wash basin 600x480 mm

Bolts and nuts 16 mm dia 60 mm long

Bolts and nuts 16 mm dia 65 mm long

Bolts and nuts 20 mm dia 65 mm long

Bolts and nuts 20 mm dia 70 mm long

Bolts and nuts 20 mm dia 75 mm long

Bolts and nuts 20 mm dia 80 mm long

Bolts and nuts 24 mm dia 85 mm long

Bolts and nuts 24 mm dia 90 mm long

Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings, seat cover etc

Common burnt clay F.P.S. (non modular) bricks tile class designation 10

Common burnt clay modular bricks class designation 12.5

Gunmetal non-return valve-verticlal (screwed end) 80 mm dia

560 mm dia cover without frame (Heavy duty)

Stainless steel bolts /square bar and plates

Mild steel tubes hot finished welded type

Mild steel tubes hot finished seamless type

Aluminium primer

Mobil oil

F.P.S. (non modular) clay fly ash bricks class designation 7.5

12.5 mm thick tapered edge gypsum plain board

Primer (for gypsum board)

M.S. Butt hinges 125x90x4 mm

GI wire netting 3/4

Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg

Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm

Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Coloured (other than black)solid P.V.C. seat in European W.C. pan

Circular shape 450 mm dia Mirror with Plastic moulded frame

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Oval shape 450x350 mm (outer dimension) Mirror with Plastic moulded fame

Rectangular shape 1500x450 mm Mirror with Plastic moulded frame

Rectangular shape 600x 450 mm precast R.C.C. manhole cover with frame - L.D. - 25

Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. -25

Precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement

Epoxy paint

Superior quality road marking paint (water based)

Binding wire

Double action hydraulic floor spring with stainless steel cover plate

Cat's eye

Raj nagar plain white marble (table rubbed add polished ) 18 mm thick (slab area upto 0.50 sqm)

Raj nagar plain white marble (table rubbed and polished ) 18 mm thick (slab area more than 0.50 sqm)

PTMT - Waste Coupling 31/32 mm

PTMT - Waste Coupling 38/40 mm

PTMT - Bottle Trap 38/40 mm

PTMT - Ball Cock 15 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT - Ball Cock 25 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT - Swiveling shower 15 mm

PTMT - Towel Ring 215x200x37 mm

PTMT - Towel Rail (450 mm)

PTMT - Towel Rail (600 mm)

PTMT - Shelf 450x124x36 mm

PTMT - Urinal Spreader 15 mm

PTMT - handle 125x34x24 mm

PTMT - handle150x34x24 mm

Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894

Gravel 5 mm to 10 mm

Gravel 1.5 mm to 2 mm

Gravel 3 mm to 6 mm

M.S. pipe 100 mm dia casing pipe

M.S. cap 100 mm dia

Stone cleaning chemical approved by ASI

Turpentine oil

Pea Gravel

Matt finished vitrified tile 100x100 x16 mm

Hire charges of Drill machine upto 30 mm dia

Epoxy

Hire charges of compressure

Adhesive chemical

Bit of drilling machine for Hole upto 30 mm dia

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

30 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

Adhesive solvent cement

Geotextile 120 gram per sqm membrane

Acrylic exterior paint

Vitrified floor tile 50x50 cm

Vitrified floor tile 100x100 cm

Eposy Grout

Telescopic drawer channels 300 mm long

Magnetic catcher triple strip vertical type

Magnetic catcher double strip horizontal type

100 mm mortice lock with 6 levers for aluminium door

12.5 mm thick Glass fibre reinforced Gypsum board

30 mm thick factory made glass fiber reinforced pllastic flush door shutte i/c carriage

65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in white grey or wooden finish

37 mm thick Factory made shutter with style, rails and panels of PVC extruded section in white or grey finish i/c carriage

75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in white, grey or wooden finish

Reducing Tee for 22.22 mm X 15.88 mm outer dia SS pipe

Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe

Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe

Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe

Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe

Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe

Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe

Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe

Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe

Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe

Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded

Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded

Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded

Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded

Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded

Female thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded

Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal dia threaded

Female Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded

Female Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded

Female Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded

Female Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded

Female Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded

Male Threaded Elbow 90o for 15.88 mm outer dia X 15 mm nominal dia threaded

Male Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded

Male Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded

Male Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded

Male Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded

Male Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded

Petrol

Carriage

Carriage and sundries

G I wire

Sub Head: Carriage

Steam coal

Cost of Neelgiri/Maxican grass truf sqm

Sub Head: Market Rate

Soft rock metal

Hire charges of 5 KVA Generator

Hire charges of 3 KVA Generator

Hire charges of Monkey set

Bright finished or black enamelled mild steel screws 40 mm

Bright finished or black enamelled mild steel screws 20 mm

Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm

Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm

Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm

Thermocol 12.5 mm thick.

Supplying fitting and fixing of bitumen drum sheet including nails for pilling or other works.

Shower jet

Porcelain P trap

Porcelain S trap

Hire charges for hand cart, tri cycle, trolly, Panja, Kata,GI Bucket, Boxes, Basket etc complete set