PROVISION OF SECURITY POST WITH GUARD ROOM NEAR PUMP HOUSE AT DCN SUB GP DABATHAWA UNDER GE(U) MEERUT CANTT

Amount

Surface dressing n exc 30cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.50 M wide and not exc. 1.50 M in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M & L ATT of the back fill in contact with foundation at the rate of 7.5 litre of emulsion per Sqm of vertical surface (area of the sub structure in contact with back fill to be measured) complete all as specified and directed.

M & L bottom and sides of excavation at the rate of 5 litre of emulsion per Sqm for surface area complete all as specified and directed.

M & L treating the top surface of filled earth at the rate of 5.0 litre of emulsion per Sqm of surface complete all as specified and directed.

M & L ATT for these under plinth protection at the rate of 5.0 litre of emulsion per Sqm of surface, complete all as specified and directed.

M & L Cement Concrete Type D2 1:4:8 (40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M & L hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Spreading,levelling in layers not exc. 25 cm thickincluding well ramming including watreing as required complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L 50 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection cement concrete surface, complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L providing reinforced cement concrete M-25 (Design Mix))), using 20 mm graded crushedstone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concreteM-25 (Design Mix)), using 20 mm graded crushed stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded crushedstone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 6-8 mm mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 19 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M & L use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.

M & L use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges in rough finished surface of concrete complete all as specified and directed.

M & L use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

Material and labour brick work with fly ash old size brick, straight or curved on plan exc. 6m mean radius, built in CM (1:6) , complete all as specified and directed.

Ditto all as per item no. 26 Above but in half brick work in CM 1:4, complete all as specified and directed.

M&L rendering 10 mm thick plaster on concrete surfaces in CM 1:6 with sagol finish.

M&L rendering 15mm thick in CM 1:4 on fair faces of block work or concrete surface incl mixing of water proofing compound finished even & smooth with using extra cement. (Note: WPC shall be measured & paid seperately)

Supply only liquid water proofing compound.

M & L 5 mm thick rendering on ceiling of new brick/ concrete surface with cement mortar 1:3 complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M&L for sand filling under floors including watering & consolidation concrete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate) set in CM 1:4 as in window door cills, lintels, brssumers, PCC Kerb stone,steps , quions blocks(for use with masonary ) string coarses, coping kneelers, apex stone, pier caps, coloumns, post boundary pillars, bed plates, pintle blocks,ancho-rage blocks, bounders (for stone walling) corbels, brackets etc (of any section indicated), with plain fair faces including weathering, slightly rounded or chamfered angles & throating, concrete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

All as per item No 38 above but on skirtings incl 10 mm thick rendering in CM (1:4) , complete all as specified and directed.

M & L Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete including over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No 39 above but on skirtings incl 10 mm thick rendering in CM (1:4), complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450x 250x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles including 10mm thick rendenering layer in CM 1:4 for laying floor finishes.

M & L preparation of newly plastered or un-plastered surfaces of walls and applying three coats of OBD over a coat of primer complete all as specified and directed.

M & L preparation of newly plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or proviously untreated steel surfaces of any description over 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed.

M&L preparation of new or proviously untreated steel surfaces of any description not exc 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles andprelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S frame welded/sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F, 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass etc, sizes of members of shutters as specified in SSR part I, section 8, clause 8.24(a) Complete all as specified and as directed

S & F rotational moulded polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket

S & F pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pip, complete all as specified and directed.

S&F stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe, complete all as specified and directed.

S&F in repairs vitreous China urinals half stall urinal (back or corner wall type), complete inlcuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia

S & F PVC connection pipe 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S & F Brass cromium plated shower rose of 125 mm dia complete all as specified, complete all as specified and directed.

S & F of 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed, complete all as specified and directed.

Supply and fix vitreous china squatting pan, orissa pattern size 680 x 470 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of concrete, complete all as specified and directed.

S & F 100 mm bore cast iron ‘P’ or ‘S’ trap complete all as specified and directed.

S & F 32 mm bore brass chromium plated bottle trap for wash basin with inlet and outlet, screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement concrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick, complete all as specified and directed.

S & F mild steel flat iron as in hold fast conforming to Fe -290 Gde E-165, complete all as specified and directed.

S & F for pressed stel doors frames with one or more rebates including necessary fixing lugs, hinges, lock strike plates of size 105x60 mm complete all as specified and directed.

M & L providing plain cement concrete type B-0, 1:2:4 in door frame filling complete all as specified and directed.

S & F factory made 35 mm thick 2nd class hard wood plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneers on both faces and size of the rail style as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded with window square guard bars complete all as specified.

S & F of steel window or ventilator fixed type with glazing bars complete all as specified and directed.

S & F mild steel window guard bars, plain square bars in and fixed independently in wooden/ steel frames, conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples, complete all as specified and directed.

S & F 3.0 mm thick forsted glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pan, complete all as specified and directed.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complet, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete, complete all as specified and directed.

S & F extruded aluminium anodised alloy handles, fabricated type,150 mm long, complete all as specified and directed.

S & F 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed.

S & F 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F 300 mm long aluminium alloy anodised sliding door bolts with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as directed and specified

M&L cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 100mm dia, complete all as specified and directed.

M&L nahani trap100mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 100mm dia, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed

M&Lcement concrete 1:2:4 type B-1 using 20mm graded aggregate) as in coping including necessary forms, moulds etc all as specified and directed.

M&L Precast RCC 1:2:4 type B1 (20 mm graded aggregate) in cover slabs etc set in cm 1:4, complete all as specified and directed.

150mm bore salt glazed stone ware grade ‘A’ drain pipes, jointed on concrete bed complete including testing all as specified and directed by Engineer-in-Charge.

M&L cement concrete 1:4:8 type D-2 for concrete bed including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe.

Construction of RCC hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 10 users.

Construction of soak well of 1.20 meter dia and 3.00 meter effective depth, inclusive of all material and labour, all as specified in Perticular Specification and shown in drawing of CEBZ TD/309, Sheet 1/4 to 4/4.

M&L for damp proof course Bitumen blown any grade, applied hot,two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coa complete all as specified and as directed.

M&L providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:3 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely including 10 mm thick cement plaster in cm 1:4 and all as specified and directed Make : Asian Paints /Thermax Note:- The work shall be carried out by autherised applicator as per the directions/ literatures provided by the manufacturer of the product .

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLS copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light /Tube point controlled by one, one way switch 05/06 Amps

One 3 Pin, 05 /06 Amps socket outlet point on indpendent board controlled by one, one way 5/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 99 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

S&F Light emitting Diode (LED) tube light fitting surface/ pendent mounting decorative box type AC 220-240V, 50 hz, CRCA body with acrylic diffuser 20 watt, 4' long, and making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity complete all as specified & directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete alla s specified and directed.

Supplying, fixing including connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 30 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate number 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Material and labour for river sand, unwashed and screened dry ) for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)

M&L fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 25 sqmm 2 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ and pipe shall be measured and paid separately under appropriate items ) all as specified and directed.

M&L 50mm nominal bore mild steel galvanised water tubing, medium grade with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches/ fixed to walls / poles / laid in floors for protection of GI earth strip/ under ground cable complete all as specfied and directed. Note: Excavation,returning and filling, removal of surplus soil shall be measured separately)

AR Enterprises

M/S AGARWAL CONSTRUCTION CO.

VIRAT CONSTRUCTIONS