Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.5 L+₹2.0 L (10.9%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹23.9 L+₹5.5 L (29.8%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
18 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
As per NIT
PERIODICAL SERVICES AND CERTAIN RELATED WORKS IN OTM ACCN BEGUMPET, ORC, BOLTON ROAD AND CAW UNDER GE (AF) HAKIMPET
2024_MES_675667_1
8709/E8
Open Tender
Civil Works
Item Rate
270 days
BEGUMPET AND CAW
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Hakimpet
₹58,000
Yes
12 Dec 2024
20 Sept 2024
21 Oct 2024
20 Sept 2024
18 Oct 2024
4 Oct 2024
Amount
Notes:- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. 5. Contractor should maintain separate registers for plumbing and carpenter repair works. Day to day complains should be noted in those registers with SI nos of complaints, location, qty of work, status of complaints and signature of incharge and stamp of the office. Format will be given from AGE B/R Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE (Civ) on every weekend without fail. 6. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 10. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 11. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.
M&L for preparing old decorated plastered or unplastered surfaces of walls/Boundary wall and applying one coat of white wash, complete all as specified and directed.
All as per item No. 1 above but on ceilling.
M&L for preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
All as per item No 3 above but two coats.
M&L for preparation of old polished wood surfaces and applying one coat of Bee-wax polish, complete all as specified and directed.
M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
All as per item No. 6 above but two coats.
M&L for preparation of existing old painted surfaces of walls and applying one coat of cement based paint, complete all as specified and directed.
All as per item No. 8 above but two coats.
M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion, complete all as specified and directed.
All as per item No.10 above but two coats.
All as per item No.10 above but on ceiling.
M&L for complete removal of existing treatment on wall (Upto plaster surface) and preparing the surfaces and applying two coats of oil bound distemper over a coat of Alkali resistant Primer on 3 mm thick wall care putty, complete all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make: ’Apex weather proof exterior emulsion XP' or equivalent in Asian make as approved by GE.
Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 is to be finished even and smooth without using extra cement, complete all as specified & directed.
M&L for Rendering 5 mm thick on fair faces of brick work or concrete surfaces of celings in cement mortar 1:3 is to be finished even and smooth without using extra cement, complete all as specified & directed.
M&L for 15mm thick plastering on fair faces of brick work or concrete surfaces in two layers first layer 10mm thick in CM 1:6 and top layer 5mm thick in CM 1:4 mixed with water proofing compound at 3% by weight of cement (but excluding the cost of WPC) and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound.
M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of Alkali resistant Primer, complete all as specified and directed.
M&L for preparing new plastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.
M&L for Preparing new plastered surfaces of walls and applying three coats of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment on surfaces of walls and applying two coats of white wash, complete all as specified and directed.
M&L for preparation of Old painted surfaces of kerb stones over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparing old Pained surfaces of Brick, stone, concrete asbestos, cement or plaster, Labels etc, not exceeding 0.1sqm each, including cutting In edges and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for writing letters or figures ((Block, Roman, Italic or Indian) not exceeding 30 cm high, complete all as specified and directed.
M&L for Stops, Commas, Short Lines, Dashes, Hyphens, Brackets etc, complete all as specified and directed.
M&L complete removal of existing treatment on walls
M&L applying 1mm thick wall care putty on walls over rough surface to prepare the surface even and smooth.
M&L applying one coat of alkalic resistance primer on putty surfaces complete all as specified and directed.
M&L two coats of oil bound distemper on walls over primed sufraces complete all as specified and as directed.
M&L for preparation of old decorated wall surfaces and applying one coat of exterior emulsion weather coat, complete all as specified and directed. Make: ’Apex weather proof exterior emulsion XP' or equivalent in Asian make as approved by GE.
All as per item No. 32 above but in narrow place not exceeding 10cm width or girth.
Cutting down plants/trees of girth n exc 15cm from roof tops/sides of external walls of buildings, chajja, wall junctions, junction of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including reparing the CI/GI/PVC joints of affected locations by applying TUFALO(Helth medicine) and making good to suit the adjointing surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 with necessary scaffolding/staging etc upto and height complete all as per manufacturer instruction and as specifed. Note:- Any CI/GI/PVC pipes and fitting damaged during work shall be replaced by new one to ensure leakage/seepage free joint without any extra cost to the department.
VENKATESHWARA CONSTRUCTIONS CO (BID ID -3143439)
RAJU AND COMPANY (BID ID -3136602)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .