Continuation of construction work of the Watchman Building at Solid Waste Management site under the savings amount from the tied grants of the 15th finance commission for the financial years 2022-23 and 2023-24

Continuation of construction work of the Watchman Building at Solid Waste Management site under the savings amount from the tied grants of the 15th finance commission for the financial years 2022-23 and 2023-24

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 12mm thick cement plaster with cement mortar 1:6 (1 Cement 6 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corner...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing Jungle wood such as Nerale, Neem wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.(PWD SR for ...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.75x47x1.7mm(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.68.3 P.No. 106)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. Complete.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.62 P.No. 105)

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD SR for Buildings VOL II...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.58 P.No. 105)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing door latch with necessary screws etc complete.Oxidised mild steel door latch.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.80.2 P.No. 108)

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus/minus 1mm), with wall thickness 2.0 mm (plus/minus 0.2 mm), corner...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing door latch with necessary screws etc complete.Oxidised mild steel door latch.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.80.1 P.No. 108)

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing w...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ce...

Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ce...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm (PWD SR 2023-...

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junctionbox, elbows, screw satan interval of 300 mm as required.(C.S.R. 2023-24 V6 Item N...

Supplying and fixing HRC fuse units base on existing switch /panel board(C.S.R. 2023-24 V6 Item No5.9.2 Page No.15 off 105 )

Supplying and fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete. Protection of Over l...

Supplying and fixing surface / flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cuttingin Brick / C.C wall, including necessary rawl plugs, Machin...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (C.S.R. 2023-24 V6 Item No3.6.1 Page No.9 off 105 )

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (C.S.R. 2023-24 V6 Item No3.6.2Page No.9 off 105)

Supplying capacit or type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bea...

Wiring for lighting / power circuit using one of FRL SPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

Wiring for lighting / power circuit using one of FRL SPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

Wiring for lighting / power circuit using one of FRL SPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours &70% lumen maintenance with CRI Graeterthan 80. Power Input:220-240V@50/60...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP 65 (Weather Proof), rust proof, dust proof, water...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.59, P.No. 12...

Providing and fixing PVC (S.W.R) S Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.62, P.No. 128)

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C.I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete s...