REPAIRS TO JOINARIES SANITARY FITTINGS FLOOR TILES WALL TILES GI TUBING RAIN WATER PIPES SUNKEN FLOOR RCC ROOF MANGLORE PATTERN ROOF FLASE CEILING PVC WATER TANKS PLASTERING AT NECKLACE AREA COLONEL POINT BC COLONY AND RAMNAGAR UNDER AGE BR PASHAN

Amount

Taking down chowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down existing chowkats or frames (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm complete all as specified and directed

Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supply and fixing in opening as per specification and drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed

Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size complete all as specified and directed

Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws complete all as specified and directed

Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for 2nd class hardwood, Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (2nd class hard wood) complete all as specified and directed

Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply and fix 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed

Material and labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section.complete all as specified and directed

Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size complete all as specified and directed

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Material and labour for powder coated Aluminium sliding windows three track with and including two glass shutters using and including 5 mm thick tinted glass of make Modi guard and one shutter with and including stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using and including Aluminium powder coated section, Aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed. Note Size of aluminum sections are as under :- (i) Three track top and vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top and bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

Material and labour for Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.

Dismantling wrought iron or mild steel work and elevated iron loft tank of any description not otherwise provided for complete all as specified and directed.

Supply and fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gd E -165) complete all as specified and directed.

Supply and fix Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gd E -165) complete all as specified and directed.

Dismantling boarding of any description, fixed in any position complete all as specified and directed.

Material and labour for 18mm / 19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work / steel frame complete all as specified and directed .

Supply and fix in repairs 40mm flaps (when open) continuous (piano) higes, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Supply and fix, factory made box type steel window , comprisingof double rebated frame made of ERW Hollow outer profile of size 80mmx60mm of 1.25mm wall thickness of frame including side hung double shutters (ie one side of frame glazed shutters with sash bars and other side of frame skelton shutter without sash bars) made of ERW hollow section 40mmx20mm of 1mm wall thickness, glazed shutter divided in three panels with two Nos sash bars welded to frame of shutter and prepared to receive sheet glasses including provision of flate iron strip of size 15mm x 3mm (02 Nos) to skelton shutter with revetted bolt to secure wire mesh, providing hold fasts 04 Nos of required size complete as per Drg No CERD/TD-485/2021 sheet No 1/5 to 4/5 including a shope coat of red oxide primer and making holes 04 Nos in brick wall / stone wall / concrete for each window for fixing hold fasts of size 150x230x75mm, PCC 1:2:4 type B-1 using 20mm graded stone aggregate as for hold fasts including necessary form work, complete all as specified and directed. Note:- (i) Glass panes, wire mesh & painting shall be measured & paid separately under respective items of BOQ. (ii) Design shall be approved from GE before fabrication and placing bulk order to the manufacturer. (iii) TD drawing are not being enclosed but these shall from part of the tender documents. The same may be seen in GE office during working hours.

Supply and fix mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters:walk ways, railing, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and labour for preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouthts of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 litre and n exc 500 litre complete all as specified and directed.

All as per Item No 31 here in before but of 1000 litre capacity complete all as specified and directed.

Taking down existing roof treatment in any position with bitumenous felt including backing off the cement plastered surface of any thicness in roofs (other than ground floors), beams, chajjas, staircase etc and removing the rubbish to a distance exceeding 250 metre and n. exc 500 metre deposited where complete all as specified and directed by Engineer In Charge.

Dismantling of exisiting old padding concrete of any thickness of existing water proofing treatment over the RCC slab other than beams, chajjas, stircase etc by chipping of with proper tools viz chiesel and with applying reasonable force so as to avoid any damages exiting RCC roof slab complete all as specified and directed by Engineer-in-charge.

Material and labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in levelling / padding course on roof slab, chajjas, projections on similar surfaces existing with slope, kerbs, rounded or chamfered edges, making the surface even and smooth without using extra cement, including using liquid water proofing compound complete all as specified and directed by Engineer-in-charge. Note: supply of Integral water proofing compound will measured and paid seperately.

Material and labour for 10mm thick cement plaster in cement mortar 1:3 over PCC (while concrete is green) using approved liquid water proofing complete all as specified and directed. Note: supply of liquid water proofing compound will measured and paid seperately and dosage as per manufacturer instructions

Supply only liquid water proofing compoud as approved by GE.

Supply and fix 3mm thick APP pre-fabricated membrane with and including non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall not be less than 3.0 Kg / Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed. Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. (iii) Rates are inclusive of cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm Complete all as specified and directed. Make :- Super Thermolay APP PL of STP Ltd, Hyperlas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Dansoa (India) Ltd, Torchat of M/s Torchtar membranes & bitumen products Pvt Ltd, M/s Fosroc Chemicals, Asian Paints Smartcare APP membranes of M/s Asian Paints Ltd.

Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm complete all as specified and directed by Engineer In Charge.

Dismantling ceiling boards/AC/Fiber /pulp/insulation boards/slabs any thickness including cover fillets complete all as specified and directed

Material and labour for providing and fixing gypsum board 12mm thick in ceilling fixed with screw as per manufacturers instruction and including anodised aluminium snap grid size of grid 600mmX600mm frame work for false ceilling complete all as specified and directed by the Engineer-in-Charge.

Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 16 mm thick Plain PVC sheet of Density 600kg /cbm solid PVC insulated panels wall thickness 1.0 mm on both side on 20 mm EPS panel is stuck on both side with adhesive the panel insert in a frame work made using anodized aluminum T section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600mmx600mm). The aluminum framework is Supported from the ceiling with the help of G.I. hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminium1”x1” (25mmx25mm) angles complete all as specified and directed by Engineer-In-charge, manufacturer’s specification & drawing.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles complete all as specified and directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of timber rails, posts, rafters, purlins etc under 40 Sq cm in section in unframed work complete all as specified and directed.

Demolition of stone masonry work built in cement mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed.

Supply and fix 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, wall etc complete all as specified and directed.

All as per item No.50 above but except sheet complete all as specified and directed.

Supply and fix 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for Walling of random rubble, uncoursed built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 54 above but except stones complete all as specified and directed.

Material and labour for 2nd class hard wood plain filets rectangular or square in section clean sawn secured with nails exc 06 Sq cm but not exc 13 Sq cm complete all as specified and directed.

All as per item No. 56 above but except battens/fillets complete all as specified and directed.

Material and labour for 2nd class hard wood clean sawn batten sectional area exc 5 and n.exc 15 Sq cm at 30 cm c/c complete all as specified and directed.

All as per item No. 58 above but fixing only complete all as specified and directed.

Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote complete all as specified and directed.

Material and labour for 2nd class hard wood Weather boarding,clean sawn, plain, 20mm thick or feather edged 15 mm to 20 mm thick and fixed with 30mm laps complete all as specified and directed.

Material and labour for roof tiles Mangalore pattern inter locking at side joints laid dry complete all as specified and directed.

All as per item No 62 above but except tiles complete all as specified and directed.

Material and labour for ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in cement mortar 1:6 complete all as specified and directed.

All as per item No 64 above but except ridge tiles complete all as specified and directed.

Material and labour for 2nd class hard wood scantling clean sawn, timber fixed complete all as specified and directed.

All as per item No 66 above but except timber complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortor or bedding complete all as specified and directed.

Demolition of Cement Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed

Material and labour for 75mm thick cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

75 mm thick Cement concrete 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) in plinth protections/ hard standing path etc finishing the surface without extra cement even and smooth complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4 complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles 7mm to 8mm thick polished(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4 complete all as specified and directed.

Material and labour for double charge Vitrified ceramic tiles 9mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4 complete all as specified and directed.

Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mmX 600 mm X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1:3 as backing coat complete all as specified and directed

Material and labour for textured heavy duty exterior tiles of size 300mm x 300mm x 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4 complete all as specified and directed. Make - Johnson Endura textured disigne or techno commercial equivalent

Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia complete all as specified and directed.

Material and labour for polishing of existing terrozo tile by rubbing with grinding machine including using 220 to 350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish complete all as specified and directed by Engr-in-charge.

Material and labour for polishing of existing terrozo tile dado/skirting by rubbing with grinding hand machine including using 220 to 350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish complete all as specified and directed by Engr-in-charge.

Material and labour for Machine cut cudappa stone slab flooring 20mm to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of any type complete all as specified and directed.

Demolition of cement concrete above ground floors exc 15 cm thickness as in sunken floors or in similar works complete all as specified and directed

Material and labour for water proofing treatment of sunken floor by applying (a)15mm thick plaster in cement mortar 1:4 with WPC over (b) application of cement slurry mixed with and including acrylic based polymer modified cementitious composite compound coating in two layers as per direction of Engineer inCharge. (C) Over and above and including this 200 micron thick polymer film should be pasted with the help of adhesive after treatment, complete all as specified and directed. Note: (i) make -Dr Fixit, Asian paints ,Fosroc and M/S Sikka (ii) The work shall be executed only through authorised applicator of manufacturer

Material and labour for Cement concrete in foundations, filling and mass-concrete 1:5:10 Type E2 (Using 40mm Graded crushed stone agrregate as in sunken floors complete all as specified and directed.

Supply and fix in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length complete all as specified and directed.

Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 45gms, suitable for vitreous china wash basin complete all as specified and directed

Supply and fix in repairs Swan Neck fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min weight 675 grams) complete all as specified and directed

Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover complete all as specified and directed. Make Jaquar Cat No CNS-WHT-WH10/including pan seat cover CNS-WHT-WCS1 or techno commercial equivalent

Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed. Make: cera( cat no CNS-WHT-OP01) or technocommercial equivalent

Supply and fix in repair 15mm bore Fancy type long body chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed.

Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions ((minimum weight 400 grams) complete all as specified and directed

Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia complete all as specified and directed.

Supply and fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia.complete all as specified and directed.

Supply and fix in repair stainless steel plate rack of size 750mm x 1000mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions complete all as specified and directed.

Supply and fix in repairs soap dish, complete all as specified and directed.

Supply and fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and directed. Make Jaquar Cat No CON-273KNUPR or technocommercial equivalent

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union complete all as specified and directed

Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws complete all as specified and directed. Make Jaquar cat no CAN-1153N or technocommercial equivalent

Supply and fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and directed. Make: Jaquar cat no CON-041KN or technocommercial equivalent

Supply and fix in repairs 1.2metre long chromium plated health foucet including holder fixed to wall. complete all as specified and directed. Make : Jaquar cat no ALD-CHR-573 or technocommercial equivalent

Dismentaling water tanks exceeding 250 litre and not exceeding 500 litres complete all as specified and directed.

Dismantaling water tanks exceeding 500 litre but not exceeding 1000 litres complete all as specified and directed.

Supply and fix 500 Litres ISI embosed ( triple layer) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Supply and fix 1000 Litres ISI embosed ( triple layer) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Supply and fix 500 litres capacity PVC loft water tank ISI marked (triple layer) and fixed in elevated positon all as directed, complete all as specified and directed.

Taking out old chocked GI pipe and connections, including cleaning for refixing or removal to store for the following sizes from trenches, walls, ceilings, floors etc complete all as specified and directed :- (a) 20 mm bore

(b) 15 mm bore

Supply and fix GI tubing medium grade with and including all fittings complete to walls and ceilings or laid in floors of the following sizes, complete all as specified and directed :- (a) 20 mm bore

(b) 15 mm bore

Material and Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, complete all as specified and directed.

Supply and fix in repairs 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

Supply and fix in repairs PVC body box type cabinet mirror of size 450mm x 600mm complete all as specified and directed. Make: Prayag or technocommerical equivalent

Supply and fix in repairs 20mm bore stainless steel Gde 304 curtain rods approved by GE, complete all as specified and directed.

Supply and fix in repairs stainless steel fancy type brackets suitable for 25mm dia curtain rods approved by GE, complete all as specified and directed.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings complete all as specified and directed

Supply and fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and Supply and fix 4mm thick Sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane, complete all as specified and directed.

Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for PCC block masonry with solid blocks, exc 10 cm in width and setting cement mortar 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC, complete all as specified and directed. (wpc will be measured and paid seprately)

Material and Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and directed.

Material and Labour for Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4 using WPC, complete all as specified and directed. (wpc will be measured and paid seprately)

Material and Labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6 , complete all as specified and directed.

Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement nmortar 1:3, complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 3mm thcik wall interior wall care putty and a coat of alkali resistant primer complete all as specified and directed

Material and Labour for preparation of newly plastered wall surface and applying two coats of acyalic weather proof paint over and including a coat of acryalic primer, complete all as specified and directed.

Dismantling of old MS hinges of any type from steel windows/ventilators and Supply and fix new MS box type hinges in same or new position complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams/lintel beam, stair case, landing, chhajas and similar suspended work, Including cutting of old rustsed TMT bars complete all as specified and directed.

Material and Labour for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams/lintel beams and columns in floors, roofs, landings,cooking plateforms, balconies, canopies, deck slabs and in shelves etc, complete all as specified and directed.

Material and Labour for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in Chajjas, fins, roof projection etc , complete all as specified and directed.

Material and Labour for Form work to sides and soffits of chajjas, fins, roof projection,shelves including supports etc,to fair finished surface of concrete flat complete all as specified and directed.

Material and Labour for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips including anchoring and welding at places as directed complete all as specified and directed by Engr in Charge.

Taking down gutters and rain water pipes(any size or pattern), encluding all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store, complete all as specified and directed

Supply and fix UPVC gutters 220mm (weight not less 3Kg/meter) corrugated square with runner, runner drop,stop end, stop end drop, UPVC bracket with steel extension and GI clamp.complete all as specified and directed

Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

cleaning of any type of roof area exceeding 100 Sqm but not exceeding 300 Sqm, by removing leaves, vegatation growth, debris and accumulated mud by washing brushing or by any means without hampering the water proofing membrane(if provided) from permanent roof not accessible including cleaning of rain water pipes of any description and removing debries/spoil from site and depositing the same to low lying area exceeding 0.5 km and not exceeding 1.5km complete all as specified and directed.

All as per item No 153 here in above but area of roof exceeding 300Sqm but not exceeding 500 Sqm, complete all as specified and directed.

Supply and fix in repairs 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

Supply and fix in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

Supply and fix in repairs 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

Supply and fix in repairs 150mm long Extruded brass handles, fabricated type polished complete all as specified and directed.

Supply and Fix in repairs brass body door stopper of 150 mm long overall length and tongue with hard drawn steel spring complete all as specified and directed.

Supply and Fix in repairs Venetian blinds with design on inner face, vertical type made of fiber cloth fixed to wall with necessary aluminium brackets, screws etc including aluminium frame rope, rollers etc as approved by GE complete all as specified and directed.

Supply and fix readymade pulley operated cloth drying system includes 4 aluminium pipes, channel assembly, locking system ropes and fitting material 7 feet long (04 pipe set) complete all as specified and directed by engineer in charge.

Supply and fix readymade wall mount cloth drying system mount it 24 includes 4 MS Rod, 6 feet long MS complete all as specified and directed by engineer in charge.

Dismantling spelled, unsound and damaged/distressed plaster/concrete by scrapping with utmost care to expose reinforcement, cleaning the rusted reinforcement by rubbing with wire brushes or emery paper and disposal of debris not excedding 500 metres complete all as specified and directed.

Material and labour for applying epoxy based bonding material Nitobond EP of FOSROC or Techno Commercially equivalent of PIDILITE, BOSTIK over cleaned exposed reinforcement as well as new reinforcement provided for corrosion prevention and fresh plaster bonding to old concrete complete all as specified and directed. Note : Work shall be carried out by authorised applicator of manufacturer as approved by GE.

Material and labour for applying pressure guniting 40mm thick to all affected area of RCC/masonary structure including necessary scaffolding for the height of 6.5 metre from ground using sprayset HBL of Fosroc or equivalent of Pidilite @ 5 liters per 100 kg of cement and coarse sand in the ratio of 1:3 as per manufcturer instruction complete all as specified and directed. Note : (i) Sprayset HBL of Fosroc or equivalent of pidilite chemical shall be measured and paid separately. (ii) Work shall be carried out by authorised applicator of manufacturer as approved by GE.

Supply only Sprayset HBL of Fosroc or equivalent of Pidilite complete all as specified and directed.

Supply and fix welded steel wire fabric not exceeding 4 Kg/Sqm fixed with necessary nails/fasteners and mild steel wire not less than 0.9 mm dia etc at wall/floor/slab etc complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior parimer on wall complete all as specified and directed

Supply readymade floor stand floor it 80 double layer floor stand complete all as specified and directed by engineer in charge.

Rays Breakers

Sunil Constructions

M/S.J.V.Datar

Baljeet Singh Choudhari

AJAY ENTERPRISES

sanjay m. suryawanshi