Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹11.0 LAccepted-AOC | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹14.5 L+₹3.5 L (31.8%)Rejected-Finance 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹14.7 L+₹3.7 L (33.3%)Rejected-Finance 21 GREEN ENCLAVE SULLAR PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹15.5 L+₹4.5 L (40.6%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
26 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIMESH TRIPATHI
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
OPERATION AND MAINTENANCE OF SWIMMING POOL INCL CONNECTED WORK AT PATIALA MIL STN UNDER GE (N) PATIALA
2022_MES_514007_2
GE(N)/PAT-01/2022-23
Open Tender
Civil Works - Water Works
Item Rate
180 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹40,000
Yes
5 May 2022
18 Apr 2022
28 Apr 2022
18 Apr 2022
26 Apr 2022
19 Apr 2022
60 days
Amount
Maintenance and Operation of Swimming Pool Installations with all accessories for back wash system verticle pressure filter including valves, pressure guages and other accessories operated through monoblock centrifugal pump 6"x6" electric driven for 16 hours in two shifts of 8 hours each by employing 01 operator (Fitter general Mechanic) in each shift complete all as specified and directed, controlling the following equipments :- (i) Vertical pressure filter 19,000 GPH capacity with guages, valves and chemical dosing system complete -02 Nos. (ii) Monoblock centrifugal Pumping set 6"x6" of 10 HP capacity, complete with accessories-2 Nos (iii) Monoblock pumping set 10 HP capacity driven with electric motor AC 415 Volts 50 C/s complete with accessories-02 Nos (iv) Back wash rotary positive blower 105 CFM pressure 3 Lbs/Square Meter -01 No
NOTE : (a) The contractor shall be responsible for maintaining the quality of swimming pool water and its surroundings as per guidelines provided by the department. (b) The water shall be chemically balanced, so as not to cause discomfort and adverse effect on eyes, nose, throat, skin etc., of swimmers using the pool. Alum crystals, copper sulphate, soda ash, lime, bleaching powder etc., shall be measured and paid separately. (c) Contractor shall test the water regularly and proper record of the shall be maintained by the contractor. (d) Contractor shall attend any type of electrical faults in panel with minor stores i.e. cable jumpers, insulating material etc., without any extra cost to the department. (e) All other T&P items required for efficient maint of swimming pool shall be arranged by the contractors and the rates are inclusive in the quoted rate. (f) First aid box complete with medicines shall be kept at the installations. (g) Time of shifts will be as directed by engineer in charge.
Material & labour for cleaning of Swimming Pool floor & walls by scrubbing the bottom of walls with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete all as specified and directed.
Dewatering of UG sump near swimming pool filter plant of internal dia 5 mtr and 7 mtr depth approx and cleaning by using with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete first and then with plain water complete all as specified and directed.
Labour only for cleaning of swimming pool bottom and side walls by using suction sweeper fitted with nylon brush all as specified and directed. Note: (a) Suction sweeper including brush will be used which is at swimming pool installation. (b) This job shall be done on daily basis upto the satisfaction of Engr-in-charge. (c) Electricity for suction sweeper will be provided free of cost by department. (d) Minor repair of suction sweeper including replacement of bolts, nuts, washers and servicing of suction sweeper pump as and when required shall be provided by the contractor without any extra cost to the department. (e) The rate quoted shall be deemed to include the charges for divers for cleaning the side walls of swimming pool as and when reqd.
Supply and replacemnt of Nylon Brush for Suction Sweeper set complete fitted in Aluminium strips of metallic head for Suction Sweeper complete all as specified and directed.
Supply and replacement Algae Brush SS Bristles complete all as specified and directed.
Supply and replacement reinforced telescopic Handle not less than 8.0 mtr long complete all as specified and directed.
Supply and replacement deep Bag skimmer clip type complete all as specified and directed.
Supply and replacement of Nylone rope 20mm dia complete all as specified and directed.
Supplying and replacing PVC insulated and PVC sheathed Flat type submeersible cable with copper conductor 4 Sqmm 3 Core complete all as specified and directed.
Supply only Water test Kit (CL & PH) complete all as specified and directed. Make- Water Pik or equivalent
Supply & replacement of Nylon hose pipe 50mm bore, heavy duty complete with clamping of required size, nuts bolts and washers etc complete all as specified and directed.
Supply & replacement jute mat above 6mm thick on diving board complete screwing (steel Screw) in aluminium strip 2mm thick and 25mm wide after pressing the mat in strips, as per site requirement complete all as specified and directed.
Painting to existing MS pipe, machinery sluice valves, valve pit cover at Swimming Pool (except repaired under respective item of this schedule), jumping/dividing boards handles upper side of waste water with one coat of synthetic enamelled paint including preparation of surface complete all as directed and specified.
M&L in repair/replacement of certain Unserviceable jumping/dividing boards made out of Superior quality Teak wood with smooth finishing of thickness not less than 30mm and joniting with suitable size nuts/bolts and washers with existing wooden boards fixed on MS Flat 75mm x 6mm cut to shape/size as per existing pattern and site requirements all as specified and directed.
Supply and mixing calcium hypochlorite 65% to 70% chlorine content in granular form, calcium based granular chlorination chemical in swimming pool water through operation of diaphragm metering chemical dozing pump and ensuing to maintain/mixing of not less than 0.300 kg/ one lakh litre for free available residual chlorine which shall be tested and recorded with swimming pool incharge before start of each swimming shift. Rate is inclusive of repair/maintenance of diaphragm metering chemical dozing pump so as to ensure discharge @ 14.5 kg/hour complete all as specified and directed. Make of product shall be approved by GE. Note : (i) The payment shall be released only on production of chlorination record certificate from the Incharge of Swimming Pool before the start of each shift (ii) In case of residual Chlorine @ 1.5 to 2.00 PPM is not tested at the start of each Swimming shift, a penality of Rs. 500/- shall be recovered from the contractor for each swimming shift (iii) High strength calcium based granular chlorination chemical to packed in plastic drum of 45 Kgs each (iv) The brand and make of the chlorination chemical must be stated and certificate of Hygiene & Public Health (Govt of India) conforming compliance to all the above specification technical strength, stability,health, safety and operational point of view as well as the fact that this product is used for swimming water aplication for humans.
Supply and mixing filter alum (crystaline and clear) into Swimming Pool water for ensuring coagulation and trapping of suspended matter and colour in water in controlled manner to maintain PH value in the range of 7.2 to 7.6 @ approx. 28 Kg/day which will be tested and recorded with the Swimming Pool Incharge before start of each swimming shifts. Note: (i) The payment shall be released only on production of alum mixing record certificate from the Incharge of Swimming Pool before the start of each shift. (ii) In case of desired results are not obtained at the start of each Swimming shift, a penality of Rs. 1000/- shall be recovered from the contractor for each swimming shift.
Supply and addition of copper sulphate to Swimming Pool water once a week for controlling and accummulation of organic/inorganic material. Note: (i) The payment shall be released only on production of Soda ash mixing record certificate from the Incharge of Swimming Pool before the start of each shift.
Supply and addition of Soda Ash in Swimming Pool as per site requirement once in a week for controlling the accumulation of slimis, complete all as specified and directed. Note: (i) The payment shall be released only on production of Soda Ash mixing record certificate from the Incharge of Swimming Pool before the start of each shift.
Supply & mixing Sodium Hypochloride in Swimming pool as per site requirement complete all as specified and directed. Note: (i) The payment shall be released only on production of Sodium Hypochlorite record certificate from the Incharge of Swimming Pool before the start of each shift.
Taking out the burnt motor from base frame and transportation to local auth workshop for Rewinding electric induction motor 3 phase, 400/415 volts, 10 HP, 50 c/s by opening the same carefully and removing all burnt out coils, cleaning the slots & rewinding the same with copper wire of existing size & make, reassembling including transportation etc. and testing on full load for 8 hrs continuous running, commissioning etc. to the entire satisfaction complete all as specified and directed by Engineer-in-charge.
M&L for taking out & servicing of existing unserviceable air blower of capacity 105 Cfm with taking out of electic cable complete and reconnecting the electric and mechanical connection at existing location after replacement of Oil seal, locking arrangement and gland packing with oil and greasing complete all as specified and directed. Note : Spare parts required for replacement shall be measured and paid separately.
Supply only air filter suitable for above complete all as specified and directed
Supply only bearing as per sample complete all as specified and directed
Supply only set of rotor with hub as per existing model complete all as specified and directed
Supply only set of gear with hub as per existing model complete all as specified and directed
Supply & replacement ball bearing suitable for electric induction motor 3 phase, 400/415 volts, 3/5 HP, 50 c/s including grease, oil as required complete all as specified and directed
Supply & replacement cooling fan suitable for electric induction motor 3 phase, 400/415 volts, 50 c/s including grease, oil as required complete all as specified and directed.
Supply & replacement ball bearing suitable for electric induction motor 3 phase, 400/415 volts, 10 HP, 50 c/s including nut, bolts, keys as required complete all as specified and directed.
Dismantling centrifugal pump of capacity 10 HP and replacement of unserviceable parts i.e. bushes, bearings, sleeves, neck ring, rubber bushes as per sample including necessary machine work to shaft/impellor as required, reassembling and applying one coat anti corrosive paint on outside surface all as specified and directed by Engineer-in-Charge.
Supply & fix as in replacement of (DOL) starter 3 phase, 415 volts suitable for suction sweeper of capacity 3/5 HP including fitting testing & commissioning complete all as specified and directed.
Supply & fix as in repair single phase preventor suitable for pump set 3 phase 415 volts including testing & commissioning complete all as specified and directed.
S&F in replacement of Contactor MNX-32 suitable for 10Hp motor 3 phase 415 volts including testing & commissioning complete all as specified and directed.
S&F in replacement of Over load relay suitable for 10Hp motor 3 phase 415 volts including testing & commissioning complete all as specified and directed.
Supply and replace PVC insulated unsheathed copper cable of size 16 sqmm s / core 1100 volts grade confirming to IS -694/ 1990 complete including PVC suction hose pipe 1 1/2" inch dia ultra light & flexible with PVC spiral ribbed for extra strength complete all as specified and directed.
Supplying and fixing cast iron sluice valves ISI marked with hand wheel suitable for cast iron pipe of 100 mm bore, both ends flanged rating PN-1.0 with mild steel spindle as per IS No. 14846 including jointing with MS nuts and bolts, washers and gasket etc complete all as specified and directed.
All as per item No-36 but size of Pipe of 150mm bore complete all as specified and directed.
Supply and fix run lead joint to spigot and socketed pipes and fittings of pipe of 100mm bore including spun yarn etc. complete all as specified and directed. Note: (i) These joints are meant for laying new or old pipe & fittings. (ii) Necessary excavation & earth work shall be measured and paid separately.
All as per item No-36 hereinbefore but size of pipe 150 mm bore complete all as specified and directed.
M & L Cast iron / MS fittings of size upto 150 mm bore for spigot and socketed pipes e.g. Bends (any type, radius and angle). Tapers any type (Straight, end, increasing, decreasing or double socket etc). Tee pieces single branch, 'Y' junctions double branches, crosses (all sockets or socket and spigot or all end flanged) collars caps and plugs conforming to Is complete all as specified and directed. (Excavation, earth work, & joints shall be measured and paid separately).
S&F electric shock treatment chart coloured of size approximetely 3 ft x 2 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete all as specified and directed.
S&F machinary maintenance chart coloured of size approximately 3 ft x 3.5 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete all as specified and directed.
S & F Rubber Mat of size 1mtrx2mtrx12mm at installation as directed by Engr in Charge.
Supply & fix in replacement of MCCB 4 Pole 415Volts 36KA 200 Amps current capacity adjustable thermal magnetic release setting range overload/short circuit protection type complete with connected accessories including necessary connection with bus bar and out going cables complete all as specified and directed.
Repair to sluice valve installed at existing line of 100 mm by opening up, necessary repair comprising replacement of glands, gland packing, gaskets, facing the gate & valve seat, replacement of nut bolts, reassembling and fixing in position & testing complete all as directed. Note: - (i) The rates of material like gland, gland packing, gasket and machinery work deemed to be included in the rate quoted however the Mild steel Spindle with TT nut will be measured and paid separately. (ii) Necessary arrangements for regulating the water supply in line for the purpose of repair shall be made by contractor at his own expenses.
Supply only MS Spindle with TT nut for sluice valve of 100 mm complete all as specified and directed.
Construction of valve Pit chamber of size 900 x 900 x 900 cm (internal) with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete including demolition of existing damaged valve pit chamber complete all as specified and directed.
Taking down the existing burnt out transformer including supply, fixing and testing of 24 V 14.6 Amp transformer of all as specified and and as directed by Engineer in charge
Taking down the existing unserviceable under water light including supply, fixing and testing of 6x2 =12 watt warm white color led ss 7" surface gaskit light 24 V DC all as specified and and as directed by Engineer in charge
Arneja Builders
Buttar Construction Co.
M/s Harmans
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .