AR MO to various residential buildings under Division No.III Shimla. SH Panting and distempering work, steel work, repair of cupboards, P.F glazed shutters and other miscellaneous repair work etc. in set No.2FF Bhaji House Near kaithu Shimla

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. including carriage of materials and as per the direction of the Engineer-in-Charge

Painting wood work with Deluxe Multi Surface Synthetic Enamel Paint of required shade One or more coats applied over an under coat of primer where ever required on old work applied of approved brand and manufacture as directed by Engineer-in-charge within all leads and lifts.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 6 mm thick plywood linning ceiling of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

Providing and fixing 19 mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts.

Providing and placing on terrace 6 Layer (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (1000Litre)

Providing and fixing 40 mm thick deodar wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately,2nd class Deodar wood all complete as per direction of Engineer-in-charge

Providing and fixing Ess-Ess Curtain rod 25mm dia with brackets,end firnels and required number of curtain rings with screws etc.complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 150x10 mm complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge :125 mm

Providing and fixing murga jali of wire mesh on wall before plastering with nails etc. complete or as per the direction of engineer-in-charge including carriage of materials within all leads and lifts

Providing and Fixing Stainless steel grade 304 work welded in built up section /framed work including cutting, hoisting and fixing in posiotion including carriage of materials and as per the direction of the Engineer-in-Charge

15 mm cement plaster on the rough side of single or half brick wall of mix cement: 6 fine sand): 1:6 complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing M.S. welded mesh 25mm X 25mm X 5mm thick as per approved design complete by welding with electrical plant complete including applying priming coat of red lead paint as per HP.PWD. Specification 1990 Volume-I and including carriage of materials upto all leads and lifts by mechanical means and manual labour and as directed by the Engineer in Charge.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with including carriage of materials within all leads and lifts (i) 5mm thick. Glass Panes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore (INTERNAL)

Providing and fixing chequered steel plates of required thicness including cutting welding complete in flooring over steel frame work to be paid seperatly). including carriage of materials in all leads and lifts. As per direction of Engineer-in charge.