Providing Internal and External Electrification Works for the 60 MTPD Powder Plant at Padalur.

Wiring with 2 x 1.5 Sq.mm. PVC insulated single core unsheatched FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module swith with module front plate with painting of suitable colour with continuous earth wire connections of 1.5 sq.mm copper wire for open MS conduit Light point / fan point (for electronic regulator) (4 points / Coil) Higher End

Wiring with 3 x 1.5 Sq.mm. PVC insulated single core unsheatched FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A two way module swith with module front plate with painting of suitable colour with continuous earth wire connections of 1.5 sq.mm copper wire for open MS conduit staircse light point Higher End

Supply and Run of 2 of 2.5 Sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour (For Lighting Circuit Wiring/Wall Fan Point Wiring)

Supply and Run of 2 of 6.0 Sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 6.0 sq.mm copper wire with painting of suitable colour (For Metal Clad Point Wiring)

Supply and fixing of 1 No 6A two module 3 pin socket, 1 No 6A one module switch on suitable module surface mounting box (plastic) with cover plate (plastic) on wall with connections (5 Amps Plug Points)

Supply And Fixing of 1 no. 6A/16A Two module socket, 1 no.16A one module switch on suitable surface mounting box (plastic) with module cover plate (plastic) on wall with connections.

Supply and fixing of seven segment 8 way 63 Amps TPN MCB sheet steel distribution board (higher end) with metal/acrylic door cover flush type/ surface type fitted with bus bars and neutral links with single/three phase MCB outgoing and seperate 4 way provision for accounting 1 No 4 Pole incoming MCB/isolator and other sepearte 4 way provision for accomodating 1 No 4 Pole ELCB/RCD (Totally 8 Ways in 1 Segment) (3 x 6 Ways in each segment) and seperate provision for MCB/Isolators (Totally 24 Nos) for sub incomers in three segments with label holder and provision for takingup cable for size not less than 35 sq.mm with the following inflush with wall with earth connection only (Lighting DB - 6 Nos + Power DB - 6 Nos) i) 63 Amps 4 Pole MCB - 1 No ii) 63 Amps 4 Pole, 30mA RCCB/ELCB - 1 No iii) 63 Amps DP MCB Isolator - 3 Nos iv) 6 Amps to 32 Amps SP MCB - 24 Nos

Supplying and laying of 3 1/2 x 35 Sq.mm PVC armoured LT UG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good. (SSB to Lighting DB)

Supplying and laying of 3 1/2 x 50 Sq.mm PVC armoured LT UG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good. (SSB to Power DB)

Supplying and laying of 3 1/2 x 120 Sq.mm PVC armoured LT UG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.(MSB to SSB)