REPAIR TO BOUNDARY WALL, STEEL GATE, PERIMETER WALL, RCC JALIES, PLASTERING, STEEL GRILL WORK ON BOUNDARY WALL and CERTAIN B/R WORKS AT RAKSHA VIHAR COLONY UNDER GE (I) R and D KANPUR.

Amount

Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) Complete all as specified and directed.

--- ditto as item No.2 above --- but except bricks complete all as specified and directed.

M&L for brick work with bricks old size brick, straight or curved on plan or radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in two layers (10+5) on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in two layers (10+5) on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) surface finished even and smooth without using extra cement, including taking down old plaster of any type complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc.15 cm thickness (below or above ground level) all as specified.

M&L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection/ Path & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for Providing cement concrete 1:2:4 type B-1 in roof kerbs or Coping on compound wall, mud stops, gola, rounded, fixing of angle on wall etc flat or chamfered on edges,complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete complete all as specified and directed.

Demolition of reinforced cement concrete (any RCC work) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in cills, Fins, fascias, louvres, parapets, rcc coping and railings exc. 60cm in height, , including necessary form work etc complete all as specified and directed.

M&L for RCC 1:2:4 using 20mm stone agg type B1 using for gate Pillers, columns and posts etc complete all as specified and directed.

S&F mild 10 mm dia and over deformed TMT bars cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified.

---- Ditto --- item No 15.00 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complte all as spd and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings, beams, rcc coping and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces complete all as spd and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as spd and directed.

M&L for Providing precast cement concrte type B0 1:2:4 (12.5mm graded agg) for louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in CM 1:4 (Pre cast frame shall be measued separately and paid for under item 04032) and approval of GE including dismantling old RCC jali complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to matchcomplete all as spd and directed.

Dismentling wrought iron or mild steel work of such as grill/roof purlin , Fencing post etc not otherwise provided for complete all as specified & directed.

S&F Mild steel framed work as in doors, gates, grills, grating pintel higes stope hand made sliding bolts etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars and conforming to Fe 410-0 or 310-0 of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and incl either hooks and hinges doors( Exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing with one shop coat of Zinc Chrmate pait (incl preparation of surface at contractor wksp before febrication, complete all as specified.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Dismantling barbed wire from any type of posts complete all as specified and directed.

S&F in repair 2 strand galvanised steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining & fixing to RCC posts etc including securing or tying at crossings with galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note: (Each line wire to be measured).

Excavating in post holes (or similar holes) in loose/ soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed.

M&L for removing excavated soil n exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size complete all as directed.

Fixing only chain link fencing including line wires any mesh, size, and type to any type of standard, rails, straining bolts, etc including Provn of binding wire complete all as specified and directed.

S&F for 10-12 mm dia round steel bar fixed independly in the chain link for wooling chain links mesh including. Tieing with GI wire complete all as specified and directed.

S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wives etc incl S&F necessary nut-bolt as per site requirement complete conforming to Fe-290 Gde E-165 complete all as specified and directed.

m/s sahu enterprises

M/S PASHUPATI TRADERS

The Real Contractors