Construction of Tasar Godown Office Meeting room Boundary wall Toilet Block Sinking Borewell and Ground PH works at Sukinda Tasar Farm Sukinda TRCS Dist Jajpur

Amount

TASAR GODOWN

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Footing (M20)

Column (M20)

Plinth Beam (M20)

Lintel (M20)

Roof Beam (M20)

Chhaja (M20)

Staircase (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Window Grill

Rolling Shutter

MS Door

Providing and fixing of factory made UPVC 2-track sliding/3-track window (white colour) complete,comprising UPVC multi-chambered frame 60 mm of size 67x54 with wall thickness of 2.3mm having in built roller track on top complete in all respect as direction by EIC

Fixing Kota tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing of Granite slab in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Painting 2 coats with any enamel paint on new work over primer including cost of paint & primer , labour. over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

Supplying ,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx32mm in three rows in staircase as per approved design and specification,buffing,polishing etc.with cost conveyance,of all materials,labour,T&P etc required for the complete as per direction of Engineer-in-charge.

INTERNAL ELECTRICATION

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )

Group A

Group B

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )Group C

SUBMAIN.

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For 1.5TR A.C/ GEYSER POINTS )

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For looped Switch Boards )

Supply and fixing of following way three/single pole and neutral, sheet steel, MCB distribution, 415/240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS and blank module plates as required.

6way TPN Horizontal Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with Incommer 1 No-40A 4P RCCB (100mA) Outgoings-6-32 A SP MCB-18Nos,(L&T/ Schneider) .LDB

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

18 W LED celling lights. any approved make as directed by EIC.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required of any approved make as directed by EIC.

OFFICE

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Footing (M20)

Column (M20)

Plinth Beam (M20)

Lintel (M20)

Roof Beam (M20)

Chhaja (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Providing and fixing of factory made alluminium (powder coated)2-track sliding/3-track window (white colour) complete,comprising alluminium multi-chambered frame 60 mm of size 67x54 with wall thickness of 2.3mm having in built roller track on top complete in all respect as direction by EIC

Providing and fixing of fluse door with required fitting & fixture complete in all respect as direction by EIC

Fixing vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Painting 2 coats with any enamel paint on new work over primer including cost of paint & primer , labour. over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

INTERNAL ELECTRICATION

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )

Group A

Group B

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )Group C

SUBMAIN.

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For 1.5TR A.C/ GEYSER POINTS )

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For looped Switch Boards )

Supply and fixing of following way three/single pole and neutral, sheet steel, MCB distribution, 415/240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS and blank module plates as required.

6way TPN Horizontal Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with Incommer 1 No-40A 4P RCCB (100mA) Outgoings-6-32 A SP MCB-18Nos,(L&T/ Schneider) .LDB

EARTHING

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

FIXTURE

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

18 W LED celling lights. any approved make as directed by EIC.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required of any approved make as directed by EIC.

Supply & fitting of 2 ton splite AC machine with required fitting fixture

Providing and fixing conference table with bottom partition and 4" bottom base made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. including all fittings & fixtures complete as direction of Engineer in-charge.

Providing and fixing cupboard racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam-code 693,5375,777) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Provision,Supply & fitting and fixing of official table including all required fitting & fixture incluiding cost & convenance as directed by the EIC (4'0"x2'6")

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

Providing, fitting and fixing of conference revolving chair pedestral is base with chrome finish with five wheels, arm material is Pu foam bounded chrome coated, seat material is PU foam covered is pure leather, material of back cover / back rest is leather and central tilt, overal chair high 1050mm , back rest hight 730mm, back rest width 530mm seat hight 450mm etc. as direction of Engineer in-Charge. Make -Godrej interio

Providing, fitting and fixing in position work station chair pdestral is base made of ABS plasting with ABS / NYLON twin caster wheels, arm material is propylene, seat material is PU foam covered with fabric, material of fabric back cover / back rest is mesh fabric, material seat cover is polister fabric chair type is push back over hight of chair is 950mm back rest hight and width is 520mm and 440mm seat hight , width and depth is 450mm, 500mm and 480mm etc. as direction of Engineer in-Charge. Make -Godrej interio

Supply fitting and fixing in position MAC blinds complete as specified and directed Engineer-in-Charge.

Provision for drinking water (120 ltr capacity RO filter) with cost conveyance,of all materials,labour,T&P etc required for the complete as per direction of Engineer-in-charge.

BOUNDARY WALL

Earch ork excavation of foundation in hard soil or gravelly soil ithin 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed and depositing the excaveted earth away from site and as per the direction of the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as direction of EIC.

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete as direction of EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Column Footing (M20)

Column (M20)

Plinth Beam (M20)

Roof Beam (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC.

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction of EIC.

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Supplying, fitting and fixing of M.S. fabrication work including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Gate Grill

Window Grill

Spike on C wall

Providing and fixing of factory made UPVC 2-track sliding/3-track window (white colour) complete,comprising UPVC multi-chambered frame 60 mm of size 67x54 with wall thickness of 2.3mm having in built upvc roller track on top and upvc etc..

Providing and fixing of fluse door including all cost of labour & materials labour, T&P etc. required for the complete in all respect as direction by EIC.

Providing ,fitting & fixing of vitrified tiles including all cost of labour & materials labour, T&P etc. required for the complete in all respect as direction by EIC.

TOILET BLOCK

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Footing (M20)

Column (M20)

Plinth Beam (M20)

Lintel (M20)

Roof Beam (M20)

Chhaja (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Providing and fixing of factory made UPVC lovers venttiloter complete,ccomplete in all respect as direction by EIC

Fixing vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing of Granite slab in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china floor mounted water closet (European pattern) 'P' or 'S' type of approved make, As per IS-2556 with ISI mark, including supply of sutaible PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) with hinges & rubber buffers etc with low level pvc cistern. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE

Gents urinal

Providing all materials, labour, and T&P for fitting and fixing of 10 liter capacity PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark and Providing of necessary PVC wall plug, screws and 15mm dia PVC connection pipe with union at both end ,including testing etc. all complete as per specification & direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE

PVC low level cistem

Supply all materials and labour for fitting and fixing of 560x410mm white glazed vitreous china oval wash hand basin of approved make with supply & fixing of 32mm CP waste,15mm dia PVC water connection pipe, basin bolts & Nuts of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. with all taxes, duties, transportation etc. all complete as per direction of EIC. (Make:JAQUAR/ HINDWARE/ CERA/ PARRYWARE)

Providing and fixing 15mm dia CP angular stop cock

Providing and fixing 15mm dia CP two way bib cock

Providing and fixing Hand Faucet

Providing and fixing15mm dia pillar cock

Providing and fixing32mm CP Bottle Trap

Providing and fixingStainless steel jali grating with hole of floor / trap

Providing and fixing on wall face unplasticised Rigid PVC soil, waste water pipes conforming to IS:13592 Type-B, including jointing with seal-ring conforming to IS:5382, Make : SUPREME/ASTRAL/ASHIRVAD

110mm dia

160 mm dia PVC waste pipe

Supplying all materials, labour, T&P, fitting and fixing of following dia UPVC SWR fittings of approved make confirming to IS-14735 with all taxes, duties, transportation & requisite testing as per specification & direction of Engineer-in-charge. Make : SUPREME/ASTRAL/ASHIRVAD

110mm x110mm P trap/S trap

110mm WC Connector/ Bend with lip ring

110mm dia Plain Bend 87.5 deg

110 mm dia PVC floor trap

110mm dia single y with out door

110mm dia sweept tee with door

110mm dia Bend 87.5 deg with door

Providing and fixing 1000 ltr over head tank complete as per direction of Engineer-in-Charge. Make : SUPREME/ASTRAL/ASHIRVAD

Providing anf fixing on wall face unplastic sizes rigid PVC Soil, waste water pipes confiorng to IS-13592 type "B" or as approved make including jointing with seal ring confirming to IS-5382 mak Supreme / Astral / Ashirbad etc.completed

110mm dia

Supplying all materials, labour, / T&P . Firring & fixinmg of follwing dua UPVC SWR fittings of approved make confirming to IS-14735 with all taxes, duties, transportation and requisite testing as per specifications and direction of EIC etc. complete.Make--Supreme / Astral / Asirbad.

110 mm dia plain bend 87.5 deg

110 mm dia bend 45 deg

Supplying all materials, labour,T&P fitting and fixing of different size upvc sch-80 ball valve

50mm Dia

32mm Dia

25mm Dia

Providing and fixing square Mirrior complete as per approved specification and direction of the Engineer in charge

BOREWELL

Labour charges for drilling a vertical bore hold of a specified dia for specified depth below GL.through consolidated on unconsolidated rock with down the hold hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of EIC.including supply of rigs with it's accessories T&P for lowering of 200mm to 150mm pipe for housing fitted with socket with or without well screens as per the necessity.

Drilling of 200 mm dia bore

Drilling of 150 mm dia bore

Supply of 200 mm dia ASTM 80 Sch. PVC pipe

L/C for lowering of 200 mm dia casing pipe

Cleaning & developing the bore well using own compressor continuously till clar & adequate discharge of water-Each

S/F/F of 1.5 HP Kilosker make cubmesible pump with its accessories & control pannel board,2.5m flat cable,steel wire etc.

Supply of ASTM 80 sch.HDPE pipe of 40 mm dia

Provision for ground PH works with required fitting & fixtures etc.

AJAY KUMAR MOHANTY (BID ID -3040411)

RATNAKAR NAIK (BID ID -3043750)