GE863/EWS-T-16 OF 2022-23

Amount

M&L for preparation of old plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white lime wash on wall, complete, all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white lime wash on ceiling, complete, all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement base paint, complete, all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coat of white wash including preparation of surfaces, complete, all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil emulsion distemper, complete, all as specified and directed.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered and painted surfaces of wall and preparing the surfaces even and smooth using 1 mm thick plaster of paris putty and applying two coats of oil emulsion distemper over a coat of primer, complete, all as specified and directed.

M&L for preparation of old painted wooden or wooden based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of snythetic enamel paint (first quality), complete, all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of snythetic enamel paint (first quality), complete, all as specified and directed.

M&L for removing of old paint fron steel surfaces by paint remover or burning off by blow lamps and cleaning with scrappers, any number of coats, any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete, all as specified and directed.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of acrylic smooth exterior paint (weather coat), complete, all as specified and directed.

M&L for writing building numbers, letters or figures (Block,Roman, Italic or Indian) by writing with black synthetic enamel paint n.exc 30 cm high, complete, as specified and as directed.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work, stone masonry or concrete surfaces finished fair and even , complete, all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete, all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer, complete, all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2 mm thick wall care putty on walls, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness, complete, all as specified and directed.

Demolition of brick /block or stone measonry built in cement mortar, complete, all as specified and directed.

Dismantling wall and ceiling boards of any description or any thickness including cover fillets, complete, all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete, all as specified and directed.

S&F rolled mild steel Fe -290(Gde E-165) for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, chowkhat ,water tank staging and similar works (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete, all as specified and directed.

S &F Galvanised, corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs etc. with grade of zink coating 275, complete, all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering with self tapping screws, complete, all as sepcified and as directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of anY colour having tensile strength of 550 Mpa as in ridge hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with self tapping screws, complete, all as sepcified and as directed

S &F Plain, galvanised, mild steel sheeting, 0.80 mm thick,as in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete, all as specified and directed.

S &F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete, all, as specified and directed.

M &L for pre-cast cement concrete, type C1 (1:3:6) using 20mm well graded stone aggregate, as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:4), complete, all as specified and directed.

S&F anodised aluminium snap grid of size 605 X 605mm frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete, all as specified and directed.

S&F exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately), complete, all as specified and directed.

M&L for 25mm thick cement concrete, type B-0, (1:2:4) using 12.5mm well graded stone aggregate) as in levelling course of flooring etc. , complete, all as specified and directed.

Premium quality vitrified ceramic tiles 09 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.35 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:4), complete all as specified and directed.(Shade of tile as approved by GE/Engineer-in-Charge)

All as per Item No 33 above but as in skirting/dado over and including 10mm thick rendering in Cement Mortar (1:4 ), complete all as specified and directed.

M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in Cement Mortar (1: 6), complete, all specified and directed.

All as per Item No 35 above but as in skirting/dado over and including 10mm thick rendering in Cement Mortar (1:4 ), complete, all as specified and directed.

M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed or bedding in Cement Mortar (1: 6),complete, all specified and as directed.

M&L for glazed clolour ceramic tiles of size 300x200x6-7 mm thick as in vertical/dado surfaces over 10mm thick rendering as a back coat in Cement Mortar 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match shade of tile, complete, all as specifed and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over & including rendering 10mm thick in CM (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete, all as specifed and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 ( using 40mm well gradded stone aggreggate) as in sub base of floor, path etc, complete, all as specified and directed.

M&L coloured chequered cement concrete tiles 20cm x20cm x 25mm/ 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of Cement Mortar (1:6) in floors/paths etc, complete, all as specified and as directed.

M&L for 50 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection or similar works, including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and fair without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm, complete, all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete, all as specified and directed.

Material and labour for machine cut kota stone slab 18-20 mm thick , laid in flooring and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:4) base , complete all as specified and as directed ..

Taking down chowkhats with shutters (without taking off shutters from the frame) and removing from site, area not exceeding 1.5 Sqm each, complete, all as specified and directed.

All as per item No 45 above but area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete, all as specified and directed.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete, all as specified and directed.

S&F 1.25 mm thick pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

S&F 1.25 mm thick pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

M&L for providing cement concrete type C-0 1:3:6 (12.5 mm well graded stone aggregate) as for pressed steel chowkhats , complete, all as specified and directed.

S&F in repair providing 18 /19 mm thick pre laminted particle board interior grade prelaminated on both sides and decorative choice fixed for cupboard, kitchen cupboard and shelving , complete, all as specified and directed.

S&F as in repair continuous piano hinges mild steel bright finish or electrogalvanised width of flap 30mm , complete, all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides, complete, all as specified and directed

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical board medium density, wood partical board with commercial face veneers; supply and fix to chowkats, complete, all as specified and directed.

S&F 2nd class hard wood 35 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkat, complete, all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing, complete, all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete, all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

S&F aluminum anodized frame for doors, windows, ventilators with one or more rebated including jointing cleats for fixing etc, complete, all as specified and directed.

S&F aluminum anodized door shutters, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc, complete, all as specified and as directed.

S&F aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete, all as specified and as directed.

S&F mortice brass lock vertical type size 100mm with 4 levers, complete, all as specified and as directed.

S&F in repair floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete, all as specified and as directed.

S&F in repair aluminium (die cast ) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg,Complete, all as specified and as directed.

Taking down steel window/ventilator including guard bar, complete, all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete, all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete, all as specified and directed

S&F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete, all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete, all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S&F 200 mm long barrel tower bolt aluminum anodized extruded section fixed with chromium plated screws, complete, all as specified and directed.

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with chromium plated screws, complete, all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised, complete, all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised, complete, all as specified and directed.

S&F in repairs aluminium alloy body and tongue, anodised floor door stopper 140 mm long with hard drawn steel spring fixed in any position etc complete all as specified and directed.

S&F aluminium alloy body and tongue, anodised floor door stopper 140 mm long with hard drawn steel spring fixed in any position etc complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete, all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete, all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete, all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete, all as specified and directed.

M&L for prepartion of new wooden surfaces any description not otherwise described and exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden or steel frames glazed with putty or fixed with beads, complete, all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or beadings in square not exceeding 0.5 Sqm in each pane, complete, all as specified and directed.

Taking down GI tubing and connection 15 mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site, complete, all as specified and as directed.

Taking down GI tubing and connection 20 mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site, complete, all as specified and as directed.

S&F GI tubing medium grade of size 15 mm bore including all fittings such as bend, Tee, union, socket etc complete fixed to wall, ceiling and laid in floor etc complete all as specified and directed.

All as per Ser Item No 88 here in before but except GI pipe, complete all as specified and directed. (Old serviceable pipeshall be used as obtained from Srl Item No 86).

S&F GI tubing medium grade of size 20 mm bore including all fittings such as bend, Tee, union, socket etc complete fixed to wall, ceiling and laid in floor etc, complete, all as specified and directed.

S&F in repairs stop valves 15 mm dia chromium plated, fancy type, cast copper alloy, screwed down high presser with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

S&F in repair glass shelf with sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete, all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete, all as specified and directed.

S&F in repairs 15 mm bore brass CP mixer, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet EWC (Pedestal pattern), standard size, white (including fixing bolts but excluding flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete, all as specified and directed.

S&F in repair of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440 mm with integral foot rests, including 100mm castiron 'P' or 'S' trap and 100 mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed.

S&F in repairs PVC virgin polypropylene, valve less syphonic action type flushing cistern 10 ltr capacity, low level, white/coloured with inlet ball valve with float and handle including new bracket fixed in position, PVC bend/flush pipe 32 mm dia, complete including connections to water mains with and including 15mm dia, 450 mm long PVC connection pipes with PTMT checknuts (excluding taps), complete, all specified and directed.

S&F in replacement of internal flushing systern fittings (kit ) of make as per existing fitting, complete, all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts and 450 mm long, complete, all specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts and 600 mm long, complete, all specified and directed.

S&F in repairs , first quality , wash basins, vitreous china, white, flat back of size 550x400mm , including pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete, all as specified and directed.

S&F in repair 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete, all as specified and directed.

S&F in repair MS with PVC coated decorative curtain rod 22-25mm dia with fixing brackets, knobs etc as in repairs, complete, all as specified and directed.

Dismantling water tanks and removing from site, exc 250litres and n.exc 500 litres and supply and fixing Rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘triple layered’, screwable lid ,hoisted and fixed in position including inlet, outlet and drain pipe with plug, 20 mm dia ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.

Dismantling water tanks and removing from site, exc 250litres and n.exc 500 litres and supply and fixing Rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’, screwable lid ,hoisted and fixed in position including inlet, outlet and drain pipe with plug, 20 mm dia ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.

Dismantling water tanks and removing from site, exc 250litres and n.exc 500 litres and supply and fixing Rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 2000 litres capacity ‘triple layered’, screwable lid ,hoisted and fixed in position including inlet, outlet and drain pipe with plug, 20 mm dia ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.

Disconnecting existing tanks of capacity not exceeding 500 ltrs, draining out water, setting a side(or lowering if required) for repairs / cleaning etc., cleaning and removing accumulated sludge/ dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity not exceeding 500 litre, located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground “Cleaned on (date)”, height of words 100 mm, and hoisting if required , re-fixing and reconnecting in position after cleaning to make it operational , complete all as specified and directed .

Disconnecting existing tanks of capacity exceeding 500 litre but not exceeding 1000 litre , draining out water, setting a side(or lowering if required) for repairs / cleaning etc., cleaning and removing accumulated sludge/ dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity exceeding 500 litre BUT NOT EXCEEDING 1000 LITRE , located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground “Cleaned on (date)”, height of words 100 mm, and hoisting if required , re-fixing and reconnecting in position after cleaning to make it operational , complete all as specified and directed .

S&F in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe, complete, all as specified and directed.( Note: Ladder required for repair work shall be arranged by the contractor)

M&L for welding in repair exc 2.5 cm but n exc 5 cm in length thickness of metal to be welded n exc 6mm, complete, all as specified and directed.

M&L for powder coated aluminium door seal 1000 mm long, 30 mm wide including dust/insect arrestor, complete, all as specified and directed.

S&F in repair Mild steel, plain, black sheet 0.80 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; drain cover, water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc. with hinge and openable with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 41674.00 for old Materials as per Schedule of Credit.

M/S SHIV NATH ENTERPRISES

M/S SANTOSH KUMAR

M/S Rohit Enterprises