Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.8 L+₹6,669.91 (0.16%)Rejected-Finance KALIAPPA COMPLEX THRICHY ROAD RANGANATHAPURAM SULUR COIMBATORE 641 402 | COIMBATORE | COIMBATORE | TAMIL NADU | 641402 | L2 | Rejected-Finance being high bid value rejected | |
| 3 | L3₹43.2 L+₹2.5 L (6.05%)Rejected-Finance 10 67 1 CHINNAMUSHIDIWADA PENDURTHI VISAKHAPATNAM ANDHRA PRADESH 530051 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530051 | L3 | Rejected-Finance being high bid value rejected | |
| 4 | L4₹43.4 L+₹2.7 L (6.66%)Rejected-Finance | L4 | Rejected-Finance being high bid value rejected | |
| 5 | L5₹44.5 L+₹3.7 L (9.16%)Rejected-Finance 4 1 70 1 ROAD NO 11 SNEHAPURI NACHARAM HYDERABAD 500 076 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L5 | Rejected-Finance being high bid value rejected |
Tender Value
Refer Docs
EMD Value
₹85,500
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Tirunelveli
GE TIRUNELVELI INS KATTABOMMAN NAVAL BASE POST VIJAYANARAYANAM TIRUNELVELI
GE/TVL/8210
2022_MES_530334_1
GE/TVL/8210
Open Tender
Miscellaneous Works
Item Rate
180 days
Vijayanarayanam and Ramnad
As per NIT/ Tender documents
8 documents required · 8 mandatory
₹500
GE Tirunelveli
₹85,500
Yes
1 Aug 2022
11 Jun 2022
4 Jul 2022
11 Jun 2022
2 Jul 2022
25 Jun 2022
11 Jun 2022 - 17 Jun 2022
Amount
SCHEDULE 'A' PART-I [ B/R WORKS]
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc in any type of soil and getting out complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in Hard/Dense soil including disposal of rubbish n. exe 50m away complete all as specified and directed.
Material and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed.
Material and Labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation,filling mass concrete complete all as specified and as directed.
Supply and fix for rolled sections as in main and cross beam, hip and jack rafter purlins where connected to common rafter and running rails and guides for sliding door,fixed with angle cleats or other connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.
Material and labour for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.
Supply and fixing galvalume single skin corrugated profiled/ Plain roofing sheet of 0.50mm thickness (Total coated Metal thickness) having tensile strength of 550 MPa, coated with hot dip metallic zinc aluminium alloy coating zincalume AZ-150 or equivalent (as per AS 1397) @ 150 gms/sqm, total on both sides of ZN (45%) & AL (55%), with super polyester colour bond XRW quality paint coat or equivalent as per AS/NZS-2728 (Category 3-4) of approved colour, total coating thickness of 35 microns of a super polyester XRW quality paint system or equivalent comprising of 20 microns (NOM) exterior coat on top surface and 5 microns (NOM) reverse coat on back surface over 5 microns (NOM) primer coat, on both surface, of approved colour shade fixed with GI self tapping fastening bolt/screw as in roof covering/cladding etc as per manufacturers instructions complete all as specified and as directed.
All as per item No.8 above but 0.5mm thick prepainted plain galvalume sheeting as in ridge and gate covering fixed with GI self tapping screw complete all as specified and as directed.
Supply and fix for MS Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk)forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.
Supply and fix for mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-410 or Fe-310 complete all as specified and as directed.
Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and each screwed end to be fitted with washers and one hexagonal or square not exceeding 30cm long & dia exc 20mm and n exc 25mm complete all as specified and as directed.
Removing excavated material / soil to a distance exe 250m & n.exc 500m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.
M&L for Preparation of new untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L plain cement concrete type D2, 1:4:8, 100mm thick in sub base of floor finished even and rough to receive top layer complete all as specified and directed.
Material and labour for coloured machine pressed precast concrete interlocking paver block, any shape and size of 80 mm thickness M-35 grade conforming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed. Note :Colour & Pattern of interlocking paver blocks to be approved by GE.
Material & Labour for sand filling under floors, pavings or in foundations including watering and consolidation complete all as specified and directed.
Material and Labour for PCC coping 1 : 2 : 4 type B-1 (using 20mm graded stone aggregate) as in coping, bed plates kerb etc and weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.
SCHEDULE 'A' PART-II [ E/M WORKS]
M & L for ceiling rose, surface bakelite, 65x50mm, two to three terminals, including taking down unserviceable ceiling rose complete all as specified and as directed by the Engineer-in-Charge
Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 2.5 sqmm drawn through in and including 25mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in surface/recessed and all accessories along with 1 run of 2.5 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly including taking down old wiring complete all as specified and as directed. Note: 2 runs of 2.5 sqmm cable along with 1 run of 2.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.
Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 1.5 sqmm drawn through in and including 25mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in surface/recessed and all accessories along with 1 run of 1.5 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly including taking down old wiring complete all as specified and as directed. Note: 2 runs of 1.5 sqmm cable along with 1 run of 1.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.
Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 4 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed.
Supply and fix MCB SP 5 A to 20 A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed.
Supply and fix MCB DP 10 A to 32 A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed.
Supply and fix in repairs LED lights fitting 4 feet 1x 20 W, or nearest higher wattage suitable for surface, wall & conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose complete and taking down old U/S fittings for taking into credit complete all as specified and directed
S & F LED light fitting in repairs 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old U/S fittings for taking into credit complete all as specified and directed.
Supply and fix 32 mm dia light grade GI tube bracket of length 1.2 metre bend to required shape including MS clamp made out of 30 mm x 6 mm MS flat iron and fix on poles/wall with necessary GI bolts, nuts and washers - 2 sets for each fittings including two coat of aluminium paint over a coat of zinc chromate primer complete all as specified and directed.
S&F in repair energy saving LED security light fittings, 35 Watts or nearest higher wattage, pressure die-cast aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed.
Earthing complete with GI earth plate electrode 600 x 600 x 6.0mm buried directly in ground vertically to a depth not less than 2.25 M below GL with top edge of the earth plate not less than 1.5 M below normal GL connected with GI earth wire 4mm dia by means of bolts, nuts check nut and washers of GI and earth wire protected by GI pipe 50mm bore light grade and watering pipe 40mm bore GI pipe medium grade including one test point for testing purpose with funnel and connected to switch/control board upto 7.5m away from earth electrode including earth work, PCC (1:3:6) type C-1 chamber, RCC (1:2:4) type B-1cover slab 50mm thick with 8mm dia TMT bars reinforcement both ways at 140mm C/C, charcoal, salt, water pipe, wire mesh, lugs etc and testing complete all as applicable and as per Plate No. 3 of SSR 2009 and all as specified. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh,50mm dia light grade GI protection pipe for earth strip etc., complete.The rate quoted shall be deemed to include for Earth continuity conductor and GI protection pipe upto 7.5m.
Supply and fix LT under ground cable 1100 volts grade PVC /XLPE sheathed armoured multistranded heavy duty electric cable with aluminium conductor 4 core 25 Sqmm, laid in trenches/ duct / walls including cable gland on both termination where necessary including laying, connecting to various switches in panel board, testing and commissioning etc complete all as specified and directed. (Note:- Excavation, earth work, sand cusion & brick protection will be measured and paid seperately)
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for laying cable/pipe etc in Hard/Dense soil and getting out complete all as specified and directed.
Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick using soil obtained from excavation complete all as specified and as directed.
Removing excavated material to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.
M & L for spreading of riddled earth of approved quality for cable cushioning on top and bottom of cable as specified for cable protection complete all as specified and directed.
Supply and lay bricks in trenches , common burnt clay building bricks, subclass `B’ designation 75, old size ,with width equal to the length of the brick; laid dry on edge vertically complete all as specified and directed.
M & L for 32mm bore `light grade` galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge
Supply & installation of galvanized steel high mast lighting system of 12.5 metre in two section, section thickness 3 mm, top dia 150mm, bottom dia 360 mm, Base plate thick ness 25mm & dia of 520mm 12 side polygon of mast cross section and 900X250mm opening and door at base, GI single spike of length 1200mm lightning protection, max wind speed 180 Km/Hr, 6 Nos of foundation bolts, TS 600/25mm dia 850mm long foundation bolts 600mm (ID) dia carrage ring Winch/Power tool : Make : Integral double drum, 50:1 Gear ratio SWL 500 Kg flame proof integral motor operation 1.5 HP of motor capacity single speed reversible 415 Volts/240 Volts 6 pole single speed with motor and manual operation self lubricant in permanent oil bath of lubricant 90/140 facility of torque limitor with 2X6 mm dia stainless steel rope system and all required standared accessories complete. (Note:- Foundation, Foundation bolts, earth work concrete and LED flood/Avation light, control panel will be measured & paid seperately)
S & F Flood light fitting LED type 400 Watt, 42700 lumen output, made up of pressure die cast housing, asymmetric wide beam with IP 66 protection, lens design & optical integration with single die ceramic base high power LED to ensure uniform distribution and maintenance free system all as specified and directed by Engr-in-Charge. Make: PHILIPS, Cat No BVP485 LED427 CW AWB PSU SPD GR or equivalent JAGUAR/ WIPRO
M&L for Foundation for High mast light shall be of RCC M25 grade, clear cover 50mm, chairs at footing with steel fe 500 as per drawing including excavation, earth work,RFR etc complete all shown on drawing No. WD/14/2022 dated 10/06/2022 and all as specified and directed. Note:- Foundation bolts will be measured and paid seperately.
S&F Foundation bolts for High mast light 06 nos of size M25 dia of 850mm long as recommended by manufacturer all as specified and directed.
Supply and fix LED aviation light twin type made out of pressure die cast housing with clear carylic cover for fixing on high mast light all as specified.
Supply and fix CPRI approved outdoor pedestal mounted feeder piller box, double door with IP 43 degree of protection, made out of CRCA sheet of thicness 3.15 mm supported by equal angle of size 50x50mm including provision of 32 Amp, 50 Hz, 10 KA, 'C' curve, TPN MCB incomer, single dial time switch 25 Amps, TP contactor for automatic switching of luminaries power tool control with 9 Amps contactors and raise lower push button including cable entry base plate with cable gland at base for Incoming 35 Sqmm and out going 16 sqmm & 2.5 Sqmm terminals all as specified and directed.
Supply and fix LT under ground cable 1100 volts grade PVC /XLPE sheathed armoured multistranded heavy duty electric cable with aluminium conductor 3.5 core 35 Sqmm, laid in trenches/ duct / walls including cable gland on both termination where necessary including laying, connecting to various switches in panel board, testing and commissioning etc complete all as specified and directed. (Excavation, earth work, cushion & cable cover will bw measured and paid seperately)
M & L for 40mm bore `light grade` galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge
Supply, spreading and compacting of approved sand in cable ducts / trenches for cable cushion on both top and bottom of cable, including ramming as specified and directed by Engineer-in-Charge. (Note :- Punned thickness only will be measured)
Supply and lay burnt bricks of old size sub-class B for cable protection all as directed & as specified.
Earthing complete with GI earth plate 600mmX600mm x 6 mm thick buried directly in ground/ earth pit not less than 2.25M below ground level with top edge of the plate not less than 1.5M below ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts and washers of GI earthing strip protected by GI pipe i.e. light grade 40mm dia all as shown in electric plate No.5 of MES SSR Part I connected to earthing test point, testing complete including necessary earth pit PCC 1: 3: 6 chamber and 50mm thick PCC 1 : 2: 4 chamber cover and with 6mm dia mild steel re-enforcement of 10Cm C/L spacing both ways in lieu of CI cover refilling of soil ncluding taking down old complete Earthing system etc complete all as directed by Engineer-in-Charge. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 50mm dia light grade GI protection pipe for earth plate etc., complete
Supply and fix electric operated water purifier 50 LPH with Reverse Osmosis technology, SS Skid open type, 20" blue housing 03 Nos, membrane housing 04 Nos, pump 48 watts with adapter 02 Nos, 20" spun, 20" CTO, 20" GAC, post carbon, FR 550 2 Nos, with connection of 3/8" tube including screw, nut bolts, C clamps including connecting from water pipeline and testing TDS after completion complete all as specified and directed. Make : Vodic Info (OPC) Pvt Ltd / Aquaguard / Pureit
Supply and installation commissioning of water cooler stainless steel AUS J1 grade, hermetically sealed reciprocating Compressor fin & tube type condensor with thermal insulation 35mm PUF, 10 degree C to 25 degree C temperature and refrigerant R-134A electric driven single phase having approx storage 40 ltrs and nominal cooling capacity 40 ltrs/hrs including all neccessary fittings like connecting pipe, nipple and flatform of suitable size all as specified and directed by Engineer-in-Charge. Make:- Voltas/ Blue star/ Usha
SUPER COOL
SIVA MARUTHI ENTERPRISES
M/s Shana Constructions
SIRITEL SYSTEMS PRIVATE LIMITED
S.RAMACHANDRAN
SRI LAKSHMI GANESH ENGINEERING WORKS
p.chinnasamy
Rajapriyaconstruction
sri manikandan enterprises
AnnaiEnterprises
JR ENTERPRISES
SAI ENGINEERING WORKS
KRA Engineering and Construction
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .