AIC/AED/NIeT-652/25-26/Gr_4

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable //materials at site and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roof. (a) upto 150 mm. thick

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m, including stacking of steel bars.

Dismantling artificial stone flooring upto 50 mm, thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities notexceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding 26/ shuttering and reinforcement if any, in ground floor as per relevant IS codes. (Pakur Variety)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge

Reinforcement for reinforced concreate work in all sorts of structures including ditribution bars, stirrups, binders, etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction For works in foundation, basement and upto roof of ground floor/ upto 4m. (Tor steel/ Mild steel) (Lead upto 150Km) JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL

250mm thick 1st class brick work in cement morter (6:1) in superstructure, ground floor

250mm thick 1st class brick work in cement morter (6:1) in superstructure, ground floor

125mm thick Ist class brick work in cement morter (4:1)

Artificial stone in floor, dado, staircase etc with cement concrete (1:2.4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement@ 1.75 kg/sqm all complete including all materials and labour. In G/F. 3mm thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick

Plaster (to wall, floor, ceiling, etc.) with sand and cement morter (including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagging where necessary (Ground floor) (Excluding cost of chipping over concrete surface] (a) 20mm thick inside plaster with (1:6)

(b) 15mm thick outside plaster with (1:6)

(c) 10mm thick ceiling, floor plaster with (1:4)

Neat cement punning about 1.5 mm thick in wall dado, window sills floor drains etc.

Supplying, fitting and fixing UPVC pipes a Type and fittings conferming to IS: 13592-1992 with all necessary clamps nails including making holes in walls, etc. and cutting trenches in any soil, through masonry concrete structure etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid/bitumen/ M. seal etc.) complete. From roof top to the drain

A) UPVC TEES (a)110 mm. Dia. Tee

110mm. Dia. Bend

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion,

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the 19 195/1 surface throughly, complete as per manufacturer's specification and as per direction of the EIC (In F(a) Ground Floor)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of /1 concrete surface, if necessary or by synthetic adhesive & grout materials etc (B) Wall (a) Area of each tile upto 0.09 Sq.m (1) Coloured decorative

(B) Wall (a) Area of each tile upto 0.09 Sq.m (1) Coloured decorative

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with Gl Pipes as per IS 1239 (Part-1). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket. (a) For Exposed Work PVC Pipes(Dia) 25mm Dia

20mm Dia

Supplying fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling P-43/ with heavy brass C.P. nut, 15 mm dia

Supplying, fitting and fixing Bib Cock or Stop Cock (1) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model Florentine of Jaquar or similar

e) PTMT (Polytetra Bib Cock/Stop Cock (Prayag or equivalent) 15 mm

Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied, fitted, and fixed in position complete excluding "P" or "S' trap (Excluding the cost of cement concrete). 530MMX410MM

Supplying, fitting and fixing pillar cock of approved make b) PTMT Pillar Cock-15 mm. (Prayag or equivalent).

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length UPVC Pipes (8 Type)

fittings i) Coupler 110mm Dia.

ii) Plain Tee 110mm Dia.

Supplying fitting and fixing 10 litre PVC. low-down cistern conforming tol 5. specification with P.V.C. Fittings complete.C.I brackets including twocoats of painting to bracket etc.

Supplying fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and site 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have costnof steel primers of approved make and manufacture, MS frame covered with 5 mm th. heat moulded PVC "C" channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles, and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th., 20 mm wide cross PVC sheet as gap insert for top rail and bottom 125/ rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles 15 &rails with 7 mm (5 mm 2 mm) thx15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the "C" channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge in ground floor.

Supplying and laying true to line and level vitrified tiles of (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge (White cement, synthetic adhesive and grout material to be supplied by the contactor (B) Wall (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality Including smoothening surfaces by sand papering etc door

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. On metal surface

Painting with best quality cynthetic enamel paint of approved make and brand including smoothening Psurface by sand papering etc. including using of approved putty etc. on the surface, if necessary a) O 200/1 timber or plastered surface: With super gloos (hi-gloss) (iv) Two coats (with any shade except white Over wooden surface Taken from item no-26

Painting with best quality cynthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (b) On steel or other metal surface: With super gloss (hi-gloss) (iv) Two coats (with any shade except white) on steel surface Two coats Taken from item no.27

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall, 4 mm thick

Sign Board Writing & Supply Photo

Added Electrification works

Sub Total