REPAIR/MAINT OF SUBMAIN WIRING DBS MCBS AND ALLIED WORKS OF ENTIRE STATION AT AYODHYA CANTT UNDER AGE (I) AYODHYA.

Amount

Taking down existing old unserviceable submain wiring of any description and M&L for sub main wiring with two runs of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified and directed. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed to be included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

All as per Ser item No. 1.00 above but submain wiring with two runs of 4.00 Sqmm FRLSH PVC insulated copper & unsheathed conductor and one run of 4.0 Sqmm FRLSH earth PVC insulated & unsheathed continuity copper conductor complete all as specified and directed.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door TPN 4 way, 415 V horizontal type for MCBs as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed.

Supply and fix epoxy powder coated MCB, DB, double door SPN 8 way, 240 V for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of TPN 100 A, 415 V 10 KA type 'C' curve current carrying capacity fixed in the DB complete with connection testing and commissioning complete all as specified and as directed.

S&F MCB SPN, 40 Amps 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.

S&F LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, batten LED fitting 1x10 Watt, Cool Day Light (CDL), elite pride plus 5Watt 6500K LED including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, building security light LED 20 Watt, IP 66, including provision of GI bracket of siutable size, clamp and nut & bolt etc including PVC insulated flexible wire 3 core 23/0076 copper conductor, complete all as specified and as directed.

S&F in replacement, modular type switch 6 Amps one way in one module as per existing complete all as specified and as directed.

S&F in replacement, modular type switch 16 Amps one way in one module as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, modular type shuttered socket 6 Amps 2/3 pin combined in 2 modules as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, modular type shuttered socket 16 Amps 2/3 pin combined in 2 modules as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, switch piano flush type one way 6 Amps as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, switch piano flush type one way 16 Amps as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, socket outlet 5 pin, 6 Amps flush type as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, socket outlet 5 pin, 16 Amps flush type as per existing complete all as specified and as directed by Engineer-in-Charge.

S&F electronic fan regulator 230 Volts, stepped type hum free 100/300 watt, complete all as specified and directed.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Eco Creations

Ajanta Motor Store

Khan Brothers

m/s allied enterprises

His And Her Enterprises

VIDYA TRADERS