REPAIR TO ROOFING, FLOORING, JOINERY AND CEILING INCLUDING SANITARY FITTINGS AT TATTO GROUND AND HAFT CHINAR UNDER GE 970

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, complete all as specified and directed.

M&L for Plain, galvanised, 0.63 mm thick mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete complete all as specified and directed.

All as per Srl Item No 04 here-in-before but except sheeting (any thickness) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n. otherwise discribed over 10 cm width or girth and applying one coat on old surfaces including preparation of surfaces, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description n. otherwise discribed over 10 cm width or girth and applying one coat on old surfaces including preparation of surfaces, complete all as specified and directed.

Demolition of PCC ground floor and paving not exceeding 15 cm thickness unreinforced (below or above ground level), complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggragate) in sub base, complete all as specified and directed.

M&L for Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/reactangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm, in floor finishes set and joineted in neat cement slurry and pointed in white or colured cement to match over incl 15 mm thick screed bed in cement mortar 1:6 including finishing even and fair, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed neat cement slurry and pointed in white in coloured cement to match over incl 15 mm thick screed bed in cement mortar 1:6 over including finishing even and fair, complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4, complete all as specified and directed.

Dismentling floor hearth or wall tiliing including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premisses, complete all as specified and directed.

M&L for Coloured glazed ceramic tiles of size (350x450x7) mm thick,on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

M&L for rendering cement plaster, 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plain exceeding 6 meteres mean radius in cement mortor 1:6, including Demolition of brick work or stone masonary built in cement mortor including all quions arches, pillar etc but excluding aslar facing, dressed stone work and pre- cast concrete articles, complete all as specified and directed.

M&L for 20 mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortor 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water,complete all as specified and directed.

M&L for 15 mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortor 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Prepararing plastered new surfaces of walls and applying two coats of oil bound distemper, oil emulsion, over a coat of primer Chalk whiting, complete all as specified and directed.

M&L preperation of old decorated surfaces of wall and applying Two coat of oil bound distemper (oil emulsion) white or tinted, complete all as specified and directed.

M&L for 20 mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortor 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparing new surfaces of wall and applying two coat of cement base paint over a coat of white wash primer, complete all as specified and directed.

M&L preperation of old decorated plastered surfaces of walls and applying two coats of cement base paint on old surfaces, complete all as specified and directed.

M&L for rendering cement plaster 5 mm thick in cement mortar 1:3 on fair faces of concrete in ceiling, chajjas, fins facia etc. finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on walls complete all as specified and directed.

M&L preparation of new plastered surfaces of walls applying one coat of 2 mm thick wall putty complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

S&F in repair Anodised aluminium frame for partitions,doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F 2nd class HW, glazed and skelton shtters for window and ventilators 30mm thick open rebated and prepared to receive glass,guage, etc (without sash bars) edges of framing plain, chamfered or rounded , fitted with cut and mitred beds for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24(b), complete all as specified and directed.

S&F in repair Anodised aluminium window and ventilator shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100 mm long (2 No.) suitable handle (1 No.), complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but n exc 2.00 sqm each, complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm but n exc 4 sq. m each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any extra cost of Govt), complete all as specified and directed.

S&F of 2nd class HW Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplies and fixed, complete all as specified and directed.

S&F panelled shutter 2nd class HW rail and style, 30 mm thickPlain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

S&F 35 mm thick, 2nd class HW factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), complete all as specified and directed.

S&F in repair Anodised aluminium door shutters open,sliding type, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene acking, handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc, complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any extra cost of Govt), complete all as specified and directed.

S&F Factory made solid PVC door frame of size (50x47) mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F Galvanished MS wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples, complete all as specified and directed.

S&F in repair Galvanished MS wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples, complete all as specified and directed.

S&F 10 mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, fixed with screws to aluminium frame for partition wall and aluminium door, complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description) from wooden frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with in square exc 0.5 sqm in each pane with solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer, complete all as specified and directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy, complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy,complete all as specified and directed.

S&F 150 mm long aluminium bow handles cast type anodised complete all as specified and directed.

S&F in repair 150 mm long aluminium bow handles cast type anodised complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in reapir 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 75 mm long aluminium anodised barrel tower bolt of extruded section.

S&F butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed.

S&F in repair butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed.

S&F butt hinges med weight cold rolled MS, size 75 mm complete all as specified and directed.

S&F in repair butt hinges med weight cold rolled MS, size 75 mm complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for old surface preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

M&L for 2nd class soft wood clean swan in timber scantling including dismantling unframed work timber scantling 40 sqcm and over in section in any position, complete all as specified and directed.

Dismantling wall and ceiling boards fibre, pulp insulation etc or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F 2nd class HW plain fillets,sectional area exceeding 13 not exceeding 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and directed.

M&L for 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face fixed with nails to timber frame work as in wall and ceiling, complete all as specified and directed.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face fixed with nails to timber frame work as in wall and ceiling, complete all as specified and directed.

S&F 2nd class HW plain fillets,sectional area not exceeding 3 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed.

S&F Providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice & other side balancing white lamination fixed with screws to timber framework in cupboard, complete all as specified and directed.

S&F 25 mm curtain rod stainless steel fancy type with finale cap 2 Nos stainless steel bracket including fixing arrangement in walls etc, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

S&F granite slabs 20 mm thick machine cut, fixed independently to walls duly supported with partition wall, made to shape as directed at site, inclulding, cutting and polishing complete as in platform for oval shapedstone Food counter top and kitchen sinks, complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25 mm thick over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over in floors etc, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations, complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore15 mm, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 15 mm, complete all as specified and directed.

Refixing and cleaning 15 mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc), complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20 mm, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 20 mm, complete all as specified and directed.

Refixing and cleaning 20 mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc), complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 25 mm, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 25 mm, complete all as specified and directed.

Refixing and cleaning 25 mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc), complete all as specified and directed.

S&F rotational moulded polythylence water storage tanks 500 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 ltrs including disconnecting the unserviceable existing tanks including ball brass valves 20 mm bore high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule including dismantling unsv water tanks exc 250 ltr but not exc 500 ltrs, complete all as specified and directed.

S&F rotational moulded polythylence water storage tanks 1000 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 ltrs including disconnecting the unserviceable existing tanks including ball brass valves 20 mm bore high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule including dismantling unsv water tanks exc 500 ltr but not exc 1000 ltrs, complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) white, fixed in repairs (excluding fixing bolts, flushing cistern and pipe) fixed including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

M&L for Vitreous china squatting pan 'Orissa' pattern' size 580x440mm white, with integral foot rests (excluding fiushing cistern and flush pipe ) including connection to trap ,anti syphonage pipe, etc and provision of concrete bedding but fixed in repair, complete all as specified and directed.

S&F Cast iron P trap of 100 mm dia bore for “Orissa type WC ISI marked, complete all as specified and directed.

S&F PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve, float valve and handle including brackets 10 ltrs capacity fixed in repairs, complete all as specified and directed.

S&F flush pipe of polyethylene of low and high density of PVC 32 mm for low level cistern, complete all as specified and directed.

S&F PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks as in repairs, complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15 mm fixed, complete all as specified and directed.

S&F in repair 15 m m dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe fixed in repairs, complete all as specified and directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size fixed, complete all as specified and directed.

M&L for Johnson endura paving tiles of technocommercial equivalent of size (300x300x10) mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint over 15 mm thick screed bed in CM 1:4 including finishing even & fair, complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring for path,steps finished even and fair without using extra cement, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as specified and directed.

M&L for Lagging to pipe of internal dia 15 mm pipes used in internal water supply or plumbing all round with, 25 min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20 mm mesh conforming to IS 9842, complete all as specified and directed.

M&L for Lagging to pipe of internal dia 20 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, complete all as specified and directed.

S&F in repairs, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union topipe and fix 32 mm bore CP waste coupling, plug, washer, 32 mm bore and 60 cm long PVC waste pipe including cantilever brackets made of mild steel angle iron (30x30x3) mm and FI (25x3) mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20 mm graded stone aggregate and connecting union to pipe, over all size (915x 460) mm, bowl size (410x355x165) mm, complete all as specified and directed.

S&F in repairs, 1 mm thick, stainless steel plate rack of size (120x 90x18) cm, complete all as specified and directed.

FIRDOUS AHMAD BABA