PROVN OF SOLAR WATER HEATER WITH ELECTRIC BACKUP 200 LTRS CAPACITY (QTY 06) FOR BATHROOMS AT SINGLE MEN BARRACKS (BLDG. NO P-117, 118, 128, 129, 130 AND 131) OF NO 2 TT WING OF AMC C AND C AND OTHER SANCTIONED WORKS UNDER GE (EAST) LUCKNOW

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified and directed.

Taking down chowkhat or frame with shutters area exc 1.5 sqm but not exc 4.00 sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down chowkhat or frame with shutters area not exc 1.5 sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

S&F second class hard wood, plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded and chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F second class hard wood, plain, framed panelled shutter 35mm thick(any number of panels) with panel of timber flat on both sides(feather edges) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkhats complete all as specified and directed.

S&F second class hard wood glazed and skeleton door shutters 35mm thick open, rebated to receive glass and gauge etc(without sashbars) edges of framing plain chamfered or rounded,fitted with cut or mitred beads for securing glass etc complete all as specified and directed.

S&F solid PVC frame (single rebated) of size 60x30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 mm sheet metal CSK screw complete all as specified and directed.

S&F factory made solid panel PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both sides of approved colour as infill ,with C type GI or 40x20x19 of MS pipe as stiffener including lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined together with solvent cement complete all as specified and directed.

S&F steel ventilators with centre hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type ISI marked stove enamelled black complete all as specified and directed.

M&L for aluminium sliding door bolt with cast or sheet of length 300 mm with hasp and staple (bolt type) and fixing bolts with rolled or drawn complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt complete all as specified and directed.

S&F 100 mm steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia complete all as specified and directed.

S&F curtain rods coloured, standrad quality,stainless steel not less than 25 mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

S&F mild steel work as in hold fast made out of flat iron 25mm x 5 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed

S&F GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with clips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60 mm long ,including 10 mm thick POP (Gypsum anhydrous) board to flat surface over metal frame work and reinforced with GI wire mesh, at different height or level, to provide seamless finish complete all as specified and directed .

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for 5.5mm thick plain figured glass ordinary quality and glazing with oil putty or rubber and aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc acomplete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces, finished the surface even and fair with using WPC @ 2% by weight of cement complete all as specified and directed. (Note- WPC shall be measured and paid separately 'Only')

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair complete all as specified and directed

M&L for 15mm thick rendering on brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on concrete surfaces of ceiling in CM 1:3, finish the surface even & fair finished surfaces complete all as specified and directed

M&L for 15 mm thick rendering in CM 1:3 on top of RCC roof slab with using water proofing compound @ 3% by weight of cement, finish the surface even & fair complete all as specified and directed

M&L for 25 mm thick Damp proof course to horizontal or vertical surface in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) including necessary form work complete all as specified and directed.

M&L for complete removal of exiting treatment and applying two coats of oil bound distemper over one coat of wall care putty on ceiling complete all as specified and directed.

M&L for complete removal of exiting treatment and applying two coats of oil bound distemper over one coat of wall care putty of wall complete all as specified and directed.

M&L for preparation of new plastered surface of wall including wall care putty 2-3mm thick and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of wall including preparation of surface complete all as specified and directed

M&L for preparation of newly plastered surface of ceiling and applying two coats of plastic emulsion paint over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for brick work with using sub class `B 'old size bricks straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan any radius half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 meter mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for 100 to 150 mm wide POP moulds/ cornices in required pattern/ design as in ceiling/ wall complete all as specified and directed.

Taking down 15mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down 20mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubing making good, cutting exc 10cm but not exc 20cm girth in brick walls complete all as specified and directed.

S&F of 15 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

S&F of 20 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

M&L for PCC 1:2:4 type ‘B-1’ (using 20mm graded stone aggregate) in coping, benching of manholes etc and including necessary formwork complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in subbase , flooring, etc complete all as specified and directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floors,finished even & smooth without using extra cement complete all as specified and directed

M&L for non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm , in floors etc over and including 15 mm thick screed bed in CM (1:4) and pointed including white or colour cement to match complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick dark shade, (square /rectangular) area of each tile exc 0.18 Sqm but not exc 0.36 Sqm, in floors etc over and including 15 mm thick screed bed in CM (1:4) and pointed including white or coloured cement to match complete all as specified and directed.

S&F glazed coloured ceramic digital tiles 600 x 300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM 1:4 as in vertical surfaces complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 350x250mm x 7mm thick/350x450mm x 7mm thick, laid over 15 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F of 75mm dia PVC floor trap with grating fixed in position complete all as specified and directed.

M&L in repair CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 ,1:2:4, complete all as specified and directed.

M&L in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 , 1:2:4, complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia bore single socketed, in any length with rubber ring joints laid in trenches or in floors and including dismantling of old pipes complete all as specified and directed.

S&F in repair 75 mm UPVC (SWR) bends any radius complete all as specified and directed.

M&L for PVC (SWR) pipes 110mm dia laid in floor or in trenches, single socketed with rubber ring joints and including dismantling of old pipes complete all as specified and directed.

S&F in repair 110 mm UPVC (SWR) bends any radius complete all as specified and directed.

S&F in repair coloured vitreous china WC (ET) wall/floor mounted with dual flushing cistern including all necessary fitting such as flush pipe ,waste pipe etc complete all as specified and directed.

S&F in repair vitreous china coloured WHB 600 x 480 counter top oval shape cascade pattern with single hole basin mixer taps, cast copper alloy capstan heads CP PVC connection, CP bottle trap and CP waste coupling 32mm dia in lead to waste pipe complete all as specified and directed.

S&F in repair Vitreous china WHB white, size 450 x 300mm including cast iron brackets, 32mm bore chromium plated waste coupling waste pipe of 32mm dia complete all as specified and directed.

S&F in repair vitreous china squatting pan, indian pattern, size 580 x 440mm white, with integral foot rest in cluding 'P' or 'S' trap complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair chromoium plated box type toilet paper holder fancy type complete all as specified and directed.

S&F in repair soap dish of fancy type complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 Cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair 15mm dia bib tap long body, chromium plated fancy type, cast copper alloy screwed pressure, screwed both ends for iron pipe for unions complete all as specified and directed.

S&F in repair brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed.

S&F CP towel ring 200mm dia superior quality complete all as specified and directed.

S&F PVC connection 450mm long with brass nuts and PVC washer complete all as specified and directed.

S&F in repair PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and directed.

S&F in repair stop valve/angle valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 10 liters capacity PVC low level flushing cistern including brackets complete all as specified and directed.

S&F in repair brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair health faucet for EWC CP hand hold with flexible pipe complete all as specified and directed.

S&F in repair 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed.

S&F in repair CP shower rose with arms 15mm dia complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair sheet glass 4.00 mm thick ordianry quality and glazing with oil putty or rubber and aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F sheet glass 3.00 mm thick ordianry quality and glazing with oil putty/beats in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing , complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F angle iron/boxes as framed work for shed ,chajja,projection etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F powder coated anodised aluminium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium , snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass complete all as specified and directed.

S&F 150mm internal dia, salt glazed & stoneware drain pipe grade ‘A’, laid in trenches and jointed with cement joints complete all as specified and directed.

M&L concrete bed to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C-2 and testing including necessary form work complete all as specified and directed.

Surface excavation in soft/loose soil not exc 30 cm deep and averaging 15 cm deep and getting out soil complete all as specified and directed

Surface dressing not exc 15 cm deep any type of soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation, trenches etc and getting out in soft/loose soil complete all as specified and directed

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm in any type of soil complete all as specified and directed.

Removing of excavated materials to a distance not exc 50 m and deposing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for earth filling under floor, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

M&L for 100 mm thick cement concrete1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floor/path/pavement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type C-2 (using 40mm graded stone aggregates) as in sub base of floors complete all as specified and directed.

M&L for 50mm thick PCC 1:4:8, type C-2 (using 40mm graded stone aggregates) as in sub base of floors complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and directed

M&L for mild steel TMT bars 6 to 8 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and directed

All as per item No 110 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders .

M&L for RCC 1:1½ :3 type B1 (using 20 mm graded stone aggregate) as in roof slabs, shelves etc complete all as specified and directed.

M&L for RCC 1:1½ :3 type B1 (using 20 mm graded stone aggregate) as in bands, lintel beam, beams etc complete all as specified and directed.

M&L for form work to soffits of roof slabs, floor slabs and similar work not exc 200 mm thick fair finished surfaces (flat) complete all as specified and directed.

M&L for form work to soffits to side of beams, lintel and slab etc not exc 200 mm wide complete all as specified and directed.

Supply only glass dividing strips, 3mm thick and 38 mm wide complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete, foundation of manhole etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) finished even and smooth witthout using extra cement as in plinth protection/path complete all as specified and directed.

M&L for hard core broken stone of gauge not exc 63mm, deposited, spread and levelled in layers not exc.15cm thick, water and rammed to a true surface complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash on wall complete all as specified and directed

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over one coat of primer on wall complete all as specified and directed.

S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and directed.

S&F for mild steel as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of Fe 410-W (Gde E-250) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab in flooring over 20 mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab as in skirting, over 15mm thick rendering in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over sand cushioning 30mm thick complete all as specified and directed.

M&L for RCC 1:2:4 type ‘B-1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified and directed.

M&L for 0.9 mm thick decorative laminate type-I one side of glossy colored finish over 3-4 mm thick MDF board including preparation of old wooden surface including necessary adhesive and fixture complete all as specified and directed.

M&L for hume pipe septic tank 10 users, excavation in hard soil, foundation in PCC 1:2:4 including RCC precast manhole covers having 6mm plate embedded all around /fiber reinforced cover including RFR/removal of soil etc complete all as specified and directed.

M&L for provision of soakage well of size 1.80m dia x 3.00m deep incluging necessary excavation in hard soil, foundation in PCC 1:3:6, walls of honey combed bricks work in CM 1:4, RCC cover slab, filling with bricks bats, complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tank 1000 ltr capacity cylindrical hoisted & fixed in position including PVC float valve 20 mm with all necessary assessories complete all as specified and directed.

S&F Optipro SMDB Double door in four Pole MCCB incoming and MCCB FP outgoing 12 Way Rating 250A complete all as specified and directed. Make- Indoasian,Model No: SMDB250 12W DD ME Optium F 3-1/C &FP F1 O/G or equivalent of Havelles/Legrand as approved by GE.

S&F MCCB FP 250A breaking capacity 36KA complete all as specified and directed.

S&F MCCB FP 160A breaking capacity 25KA complete all as specified and directed.

S&F MCCB FP 100A breaking capacity 25KA complete all as specified and directed.

S&F in replacement isolator four pole 415 volts, 100 Amps, curve 'C' of breaking capacity 10KA complete all as specified and directed.

Supply, installing, commissioing and testing , split Air Conditioner of capacity 1.5 TR (Hot & Cold) with inbuilt air ioniser and plasma filter, rotary compressor,auto clean function, indoor sound level 32 db, front panel display, wireless LCD remote, precoated aluminium fins, , auto fan speed, electric driven , suitable for working on 230 volts, single phase, 50 Hz supply complete including remote operation complete. The rate is included for following item-: (a) Fixing the cooling unit with grouting nuts, cutting groove to wall for gas pipe & water drainage pipe (b) S&F cutting, bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting holes to wall including brazing the copper pipe fixing union including making good disturbed surfaces as existing. (c) S&F PVC pipe 20 mm dia transparent flexible heavy duty for water drainage pipe of upto 06 RM at site. (d) Insulation of both the copper pipes with insulating material and covering the complete pipe with PVC casing & caping of size 75 x 75 mm/required size for mechanical protection of copper pipe complete. (e) Charging of correct qty of refrigerant gas after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load to obtain 18 degree celsius temperature at specified amps. (f) All other connected civil work like hole cutting & other misc work reqd for installation of split AC for proper functioning . (g) outdoor AC portion to be fixed on wall mounted stand as suitable for fixing of AC. (H) Plug top to be provided by contractor with AC wire.

S&F plug and socket DBs with SPN MCB rated 20-32 Amps capacity with socket plug top 2 pin and earth plug complete all as specified of standered make including making good disturbed surface of wall etc complete all as specified and directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 4 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for submain wiring comprising two single core , 6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including 25 mm dia. PVC conduits and conduit fittings complete (surface type ) including S&F , 4sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed ( Note :- Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings complete all as specified and directed.

Supply & Install Voltage stabilizer automatic boost/buck transformer for low and high voltage with electronic transistorised relay/ time relay for two min , SP, 50 Hz with volt meter indicator and input voltage 140 to 280 and cut up voltage 215 to 240 V capacity 4 KVA complete all as specified and directed. Make-V-Gaurd Model No-VND400 PLUS/Bluebird/Microtek or equivelent as approved by GE.

S&F in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F for 20 mm bore hot water pipe duly insulated with glass wool and aluminium cladding galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed.

S&F for 15 mm bore hot water pipe duly insulated with glass wool and aluminium cladding galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc laid in walls through proper clamps complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing as original where required and pointing in CM 1:3 for concealed water tubing etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 04 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

S&F MCB SP 5 to 32 Amps 240 volts confirming to characterstic curve 'B' , 10KA complete all as specified and directed.

S&F MCB SP 5 to 32 Amps 240 volts confirming to characterstic curve 'C' , 10KA complete all as specified and directed.

S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

S&F MCB SPN 230V, 6-32 Amps capacity complete all as specified and directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

S&F MCB TPN 415V, 32 to 63 Amp capacity complete all as specified and directed.

S&F MCB DP 32 Amps 240 volts confirming to characterstic curve 'B' , 10KA complete all as specified and directed.

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

M&L for providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Supply and laying 50 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.

Supply and laying common burned clay old size sub class B bricks designation complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F wall fan of 400 mm sweep, 220-240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 cum/min with all accessories complete all as specified and directed.

S&F exhaust fans single phase 230/240 Volts heavy duty PVC body 200 mm including suitable louvers and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed.

S&F air freshner fans single phase 230/240 volts PVC body of size 300 mm sweep 1400 RPM including cutting wall suitable size of exhaust fan and finishing as per existing colour louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and directed.

S&F air freshner fans single phase 230/240 volts PVC body of size 250 mm sweep 1400 RPM including cutting wall suitable size of exhaust fan and finishing as per existing colour louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and directed.

Taking down carefully by unscrewing from wall/ceiling, fittings and fixtures such as ceiling roses, lamp holders, brackets, ceiling fittings, tube light fittings etc. for reuse at site or carrying to the store complete all as specified and directed.

Material and labour for one fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

S&F electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F down rod 12 feet and clamp for fixing ceiling fan in existing truss of building complete all as specified & directed.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/fan point controlled by one switch 5 Amps SP complete all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.

All as per Item No 177 hereinbefore but for one 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 177 hereinbefore but for one 5 A socket outlet on same Board all as specified and directed.

All as per Item No 177 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

S&F in repair switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, complete all as specified and directed.

S&F in repair inner plate & white cover plate with frame, 1 modules complete all as specified and directed.

S&F in repair inner plate & white cover plate with frame, 2 modules complete all as specified and directed.

S&F in repair inner plate & white cover plate with frame, 3 modules complete all as specified and directed.

S&F in repair inner plate & white cover plate with frame, 6 modules complete all as specified and directed.

S&F in repair inner plate & white cover plate with frame, 8 modules complete all as specified and directed.

S&F terminal box suitable for one modular plate of size 75X75x50 mm including cutting, grooving and plastering etc.complete all as specified and directed.

S&F terminal box suitable for three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

S&F modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

S&F modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

S&F modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.

S&F modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed.

S&F terminal box suitable for two modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F terminal box suitable for three modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F terminal box suitable forfour modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F terminal box suitable for six modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F terminal box suitable for eight modular plate of including cutting, grooving and plastering etc. complete all as specified and directed.

S&F in repair LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified and directed.

S&F in repair of call bell including all neccessary connection complete all as specified and directed.

S&F in replacement of unserviceable wire of size 1.5 Sqmm two core (white colour) with PVC insulated unsheathed FRLS multistranded copper conductor for working Voltage 1100 Volts for gate light connection complete all as specified and directed.

S&F 2X2 LED ceiling light fitting 36 Watt exquisitely designed luminaire which is bound to deliver extra lumen thruogh its ;pure form and glare-less light Recessed full open with required electrical connection with suitable wire (120 lumen /watt) complete all as specified and directed. Make CG cat pat No-LCTLRP-36-FO-CDL /Havells /Bajaj Philips or equivalent as approved by GE.

S&F decorative wall mounted fancy light fitting made up of polycarbonate; sutable for retrofit (Spiral B-22 base) & including one No. retrofit CFL 15W spiral type including LED Bulb complete all as specified. Make:- Mepro cat no MBBD-901 or eqivalent of PHILIPS/HAVELLS as approved by GE.

S&F in replacement lamp holder bakelite with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair LED Mirror light fitting 10 Watt complete all as specified and directed.

S&F MCCB DB VTPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed. Make: Havells Cat No DHDLVDRWAOFO08 or equivalent in Legrand/ L&T as approved by GE

S&F of stationery storage type electric water heater storage of capacity 25 ltrs, BEE 5 star rated operated on 230 volts AC vertical type working pressure 0.8 Mpa with multi function safety valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two no flexible steel hose pipe of size 15 mm 450 mm lengh and suitable plug top of 16 Amp capacity including required pipe connection with the pipe line of internal water supply complete all as specified and directed.

Supply, install, testing and commissioning of solar water heating system, flat plate collector type, based on indirect transfer of heat with heat exchanger of 200 litre per day capacity, with electrical heating back up with proper stand and all accessories as required at site complete all as specified and directed. Make:- BHEL, Tata BP solar, Nilloy, Sintex or equivalent as approved by GE.

S&F of 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) in white colour triple layered, hoisted and fixed in position including 20 mm dia ball brass high pressure with polythene float and fly nut all as specified in SSR Part I including 2 mtr staging complete all as specified and directed.

S&F of PVC conduit of the size of 80 mm dia for the laying of the internet cable and other cable complete all as specified and directed.

M&L for renewal of earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25 mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and completion complete all as specified and directed.

M/S Reliance Construction

rajan construction