SPECIAL REPAIR TO HOUSE NO PINE 16 AT CHANDIMANDIR

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.

Material and labour for providing and fixing Gypsum Board 12mm thick in ceiling on and including standard GI snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.

Material and labour for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, walls etc. and fixed with 'L' type or 'J' type hook or cranked bolts complete all as specified & directed by Engineer-in-charge.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance exceeding 500m but not exceeding 1500m all as specified & directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Material and labour for cutting out cracks to V section to 25mm depth in exisitng roofs or terracing, cleaning out, wetting and painted with shalitex primer and filled with sealing compound, tarplastic of STP or equivalent complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in padding over roof, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Material and labour for water proofing treatment to RCC roof surface including adjoining walls comprising APP (Atactic Polypropylene Polymer) modified prefabricated five layer water proofing membrane including a coat of bituminous resistant aluminium paitn over APP sheet complete all as specified in particular specificaion

Dismantling stone slab & tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified & directed by Engineer-in-charge.

Material and labour 20mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 10mm thick in cement mortar 1:4 including cutting / rounding of edges where requried complete all as specified and directed.

Dismantling boarding , any description , fixed in any position with nails, all as specified.

Supply and fixing factory made solid PVC ply wood 18mm thick, of any colour as in cupboard, shelf, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free complete all as specified and directed.

Supply and fixing factory made solid PVC ply wood 12mm thick, of any colour as in kitchen cabinet, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free complete all as specified and directed.

Material and labour for 18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails complete all as specified and directed .

Supply and fixing for ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified & directed by Engineer-in-Charge.

Supply and fixing for continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps (when open) 40 mm, all as specified.

Supply and fixing for extruded aluminium alloy handles (ISI Marked), fabricated type, anodised and fixed size of handle 100mm, all as specified.

Supply and fixing 18/19mm thick block boards (ISI Marked), grade 1 best quality,exterior grade, commercial type, decorative face veneer on both faces, fixed with screws to timber frame-work as in cabinet box, complete all as specified & directed.

Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified.

Supply and fixing prelam embossed by thermoforming PVC sheet on one side and other side plain colour PVC sheet fixed or laid on to flush doors by using rubber based adhesive, heat bent as lipping on the edges of doors, all as specified and directed by Engr-in charge.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls , applying two coats of exterior acrylic emulsion paint on walls over a coat of water resistant primer complete all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls , applying one coat of weather proof exterior acrylic emulsion (100% Acrylic) paint complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed

Supply and fixing for mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20 mm bore complete all as directed by Engineer-in-charge.

Supply and fixing for mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Refixing old steel 15mm bore tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Supply and fixing bib cock, fancy type, long body ,cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No CON-107KN or equivalent in Marc, ESS ESS

Supply and fixing angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, high pressure with crutch or butter fly handle, screwed both end for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No Con-053KN or equivalent in Marc, ESS ESS

Supply and fixing stop cock, fancy type, cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both end for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No ALD-083 and CON-083FTK or equivalent in Marc, ESS ESS

Material and labour for 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.MAKE : JAQUAR Cat Part No CON-167KNB or equivalent in Marc, ESS ESS

Supply and fixing single towel rail 600mm long , cast copper alloy chromium plated fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat Part No AHS-1507 equivalent in Marc, ESS ESS

Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing grating doom 140mm dia of PTMT (Minimum weight 50gms) complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair for vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair factory made steel windows (Box type) with side hung shutters ,with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

Supply and fixing in repair factory made steel windows (Box type) with side hung shutters ,without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

Supply and fixing factory made aluminum frame for door openings windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing and aluminum hardware shall be measured and paid separately)

Supply and fixing 5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note : anodized aluminum bead, rubber packing, aluminum screws etc, not included in this item and shall be paid under respective items.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 4mm thick, sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.

Supply and fixing for stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

Material and labour for joint free non skid ceramic coloured tiles,of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:4) complete all as specified & directed by Engineer-in-charge.

Material and labour for glazed ceramic coloured tiles of size 350mmx250mmx7mm or 350mmx450mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Material and labour for coloured vitrified ceramic tiles light shade 9 to 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, cross sectional area exceeding 6 Sqcm and not exceeding 13 Sqcm complete all as specified & directed by Engineer-in-charge.

Supply only Integral waterproofing compound, all as specified.

Supply and fixing stainless steel cutlery pan basket or any other basket of any description/pattern fixed with sliding channel, revolving wheels fixed to wood based framed work, complete all as specified and directed.

Supply and fixing for 600mm x 900mm x 300mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.

Supply and fixing in repair, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge.

Supply and fixing Sink Mixer with Extended Spout (TableMounted Model) with 450mm Long Braided Hoses, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed. MAKE : JAQUAR Cat Part No Con-321KNB equivalent in Marc, ESS ESS

Supply and fixing for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair, vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor, fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts in repairs complete all as specified & directed by Engineer-in-charge.

Material and labour for water proofing treatment to the sunken portion complete all as specified and directed in particular specification.

Excavating in post holes (or similar holes) in hard and dense soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 Mtr and making good surface complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge.

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 with one shop coat of zinc chromate primer paint complete all as specified & directed by Engineer-in-charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6/16 Amp, independent board , complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.Note: Make of Cable Havells, RR KABLES,FINOLEX, / Anchor by Panasonic,POLYCAB

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator in and including rigid non metallic PVC heavy duty CONCEALED CONDUIT complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.Note: Make of Cable Havells, RR KABLES,FINOLEX, / Anchor by Panasonic,POLYCAB

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6 Amp on the same board , all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.Note: Make of Cable Havells, RR KABLES,FINOLEX, / Anchor by Panasonic,POLYCAB

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socked outlet three pin ,6 Amp , independent board, in and including rigid non metallic PVC heavy duty concealed conduit all as specified, all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.Note: Make of Cable Havells, RR KABLES,FINOLEX, / Anchor by Panasonic,POLYCAB

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1, 5 Amps flush type all as specified and directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply and fixing for Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.

Supply & Fixing for bell push flush type 6 Amps, single pole, 230 volts complete all as specified and directed by Engineer-in-charge.

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity. (Make :- C&S Cat part No:-CG80IB6WLED or equivalent in Philips/Crompton/Havell's/Bajaj

Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete , all as specified and directed. Make C&S Cat No LTDC01220WLED/WD or equivalent in Philips/Crompton/Havell's/Bajaj

Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 10 watts capacity 2 feet long and white light and including connections from ceiling rose complete , all as specified and directed. Make C&S Cat No LTDC01210WLED/WD or equivalent in Philips/Crompton/Havell's/Bajaj

Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed. (Make :- C&S Cat part No:-LTHPLEDLAMP9WB22 white or equivalent in Philips/Crompton/Havell's/Bajaj

Disconnecting and taking down carefully opper/aluminium sub main wiring complete, including existing batten/surface conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified.

Supply and fixing for sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC conduit 20mm size(minimum size) complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 6 sqmm cable shall be considered as 1 running metre.(ii) Conduit & conduit accessories shall be measured & paid for separately (iii) Color code shall be Red for phase, black for neutral and green for earth (iv) Make of Cable Havells, RR KABLES,FINOLEX, / Anchor by Panasonic,POLYCAB

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- Havells Cat Part No. DHDNSHODAW08 or equivalent makes in ABB, L&T, SCHNEIDER, LEGRAND

Supply and fixing sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 2 way double door without bus bar complete all as directed by Engineer-in-charge. Make : ABB, L&T, SCHNEIDER, LEGRAND, Havells'

Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat No DHMGCSPF006-032. or equivalent makes in ABB, L&T, SCHNEIDER, LEGRAND

Supply & Fixing for MCB ,SPN , 240 volt, 40Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat NoDHMGCSNF040 or equivalent makes in ABB, L&T, SCHNEIDER, LEGRAND

Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including Gl protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on pole or control board or main switch and Gl pipe medium grade 20mm bore for watering funnel with wire mesh CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicated including testing on completion all specified and directed. Note : The unit rate including for protection pipe and Gl earth wire 4.00 mm dia from top to earth plate up to 7.5 meter

Disconnecting the power supply, taking out existing UNSV wall mounting type sheet metal encloser of any size and type along with all fittings/fixtures and S & F wall mounting type indoor LT panel board fixed with 04 Nos anchor bolts of suitable size, fabricated out of 2mm thick CRCA sheat duly powder coated dust vermin and water proof, with front doors openable type for individule compartment with locking arrangement suitable for 3 phase 4wire 415 volts 50 Hz AC supply complete with and including the following (a) Copper bus bar strif size 32X6mm length 600mm-4 Nos (b) MCCB 4 Pole 63 Amps -01 No (incoming) (c) MCB SPN 63 Amps -6 Nos (d) Muilty function meter shown voltage.current, watts etc-1 No (e)LED indicators RYB-01 set of three (f) Sutiable size single core copper conductor PVC insulated cable for connections from main MCC3 output to busbars with copper lugs on both ends complete. (g) Repair of damaged wall portion to match with the original

Supply & Fixing for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specfied and directed by Engineer-in-charge.

Supply and fixing galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 2.0m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing security light fittings all as directed by Engineer-in-charge.

Supply and fixing LED security light fitting 12 watts capacity with power coated pressure die cast aluminium housing with integrated lens suitable for and including 32mm bor GI medium grade pipe bracket 1.5 metre long , bent to shape required ,all as specified and directed by Engr-in-charge. (Make :- C&S Cat part No:-LTESSE12WLED white or equivalent in Philips/Crompton/Havell's/Bajaj

M/S Hari Om Construction