PROVN OF SECURITY WALL WITH ALLIED INFRA , STORM WATER DRAINAGE, GUARD ROOM WITH ANCILLARIES AND SECURITY LIGHTS FOR COMN COMPLEX AT UDHAMPUR UNDER GE (S) UDHAMPUR

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total Amount of Sch 'A' Part - II (Site Clearance)

Total Amount of Sch 'A' Part - III (Internal Electrification)

Total Amount of Sch 'A' Part - IV (Internal Water Supply)

Total Amount of Sch 'A' Part - V (Plumbing Work)

Total Amount of Sch 'A' Part - VI (Sewage Disposal work )

Total Amount of Sch 'A' Part - VII (Area Drainage work)

Total Amount of Sch 'A' -VIII (Protective Work)

Total Amount of Sch 'A' -IX (Road/Path/Culvert)

Total Amount of Sch 'A' -X (Security wall and Gate)

Total Amount of Sch 'A' Part -XI (External Electrification Works)

Total Amount of Sch 'A' Part -XII (External Water Supply Works)

Total Amount of Sch 'A' Part -XIII ( Demolition Work)

Sch 'A' Part - XIV (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Galvanized pipe, medium grade, supplied and laid in trenches, Complete including fitting of 40mm dia

Galvanized pipe, medium grade, supplied and laid in trenches, Complete including fitting of 25mm dia

Cutting existing water line connection 50/40mm and making suitable size for joining 40/25mm dia pipe including welding, bending and necessary fittings etc, complete all as directed.

XLPE insulated Cable, insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric, power cables (heavy duty), 1100 volts grade with stranded aluminium conductor of size 10sqmm 2 core (For Guard Posts)

Septic tank 10 users with all ancillaries / fittings and fixtures etc complete all as specified and shown on drawings..

Soak well of 1.2 mtr internal dia and 3.0 mtr effective depth with all ancillaries fittings fixtures etc complete all as specified and shown on drawings.

Sluice valve, class 1.0 PN with iron wheel head screwed at both ends for iron pipe 100mm dia

Brick masonry valve pit of size 105cmx105cmx105cm (internal dimesnions) including excavation and earthwork in any type of soil, plastering all wall surfaces internally and flush pointing to brickwork internally and flush pointing to brickwork externally as the work proceeds, complete including angle iron 40x40x5mm frame, MS Sheet cover 3.15mm thick with 12mm dia handle, locking arrangement and painting with two coats of synthetic enamel paint over a coat of red oxide, Complete all as specified and directed

Cutting existing water line connection 150mm and making suitable size for joining 100mm dia pipe, including welding, bending and necessary fittings, etc

Supply and Fix LED 70watt, IP 66 on steel poles with GI Bracket of 40mm dia light grade with clamps, nuts, bolts, washer and length non GI Bracket not less than 1.2mtr, comprising of dia case aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100lun/watt, lumen maintenance > 70% at 50000hrs, color temp 5000-6500K, CRI >70, THD < 15%, PF >0.95 and LM 80 test compliance. The drive must be integrated with APFC short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 61000-3, IEC-61547. The luminairs must have secondary optics with perfectly matched lens for better lioght control including making electrical connection street light to junction box, all as specified and direcetd. Make :- Wipro or Equivalent in make Philips, Crompton.

Supply and fix thermoplastic cable junction box/distribution board IP 65, with metric knockouts for cable entry of size 16sqmm x 4core including MS Clamp size 25x3mm including nut, bolts etc, with LT pole box size 210x310x116mm hinged cover with locking arrangements including with terminal K9504, isolator SPN 20Amp alumium bus bar of 4strip. Make:- Hensel or equivalent of Sintex, Complete all as specified and Directed.

Supply and fix time switches 230V single phase of 32Amp rating with contractor fitted inside steel enclosure.

S&F concertina coil with punched tape of 600mm dia, centre core wire shall be minimum 2.5mm dia of mild steel conforming to IS 280-2006, galvanised coating of steel concertina coil shall confirm to requirements as laid down for medium coated wire in IS 4826 "Hot dip galvanised coating of round steel wires" concertina coil shall be fixed in diamond shape the help of dove tail two handles and spikes shall be fixed at both ends of coil, minimum straight length of the wire 150RM of 10 RM , minimum weight 13.5 kg for 10 RMof work i.e 90g, per RM of wire complete all as specified and directed.

Ceiling fan of 1200mm sweep (5star rating) with three blades canopy down rod and connecting up including provision of flexible copper conductor cable, 3 core size 23/.0076 from ceiling rose to ceiling fan and testing complete, Complete all as specified and directed

Exhaust Fan of 300mm sweep, complete with aluminium louvers and shutters fixed on walls and grouting bolts and nuts of suitable size in PCC 1:2:4 type B-1 blocks of size 150x150x150mm including provision of cable, 3 core, flexible copper conductor 23/.0076 from ceiling rose to fan and testing, Complete all as specified and directed

LED tubelight 18watt including box type fitting complete, decorative type ultra shine luminaire LED lighting fixture with all accessories prewired and including connecting up with three core twisted flexible copper conductor cable with suitable size, Complete all as specified and directed

LED lamp 10 watts , Complete all as specified and directed

CREDIT SCHEDULE: Deduct Credit schedule worth Rs 3,27,516.00 (Minus) as listed in Schedule À' Part-XV . Note: Tenderers will not quote against this item being a firm amount. Contract lump Sum will be worked out offline after deducting the credit schedule amount.

Mehar Enterprises

M/S VED PARKASH GUPTA

R K BUILDERS

M/s Khajuria Construction Co.

M/s Rukmani Construction Company

V K Sales and Construction Co