REPAIR TO SECURITY WALL, FENCING AND COMPOUND WALL AT RESIDENTIAL AREA AGRA, SEWAGE LINE, MANHOLES, DRAINS, SEPTIC TANKS SOAK WELL ETC AND ROAD AND ROAD SIDE FURNITURE, ROAD BERMS INCLUDING PATH CULVERTS AT TECH AND RESIDENTIAL AREA UNDER GE I RN

Amount

Cleaning of sewage pipe line of any dia and depth by rodding and water pressure and cleaning of sewage line from manhole to manhole complete by mechanical means or manually complete all as specified and directed.

Cleaning of manhole upto 1.5 m deep and taking out sludge, night soil, mud, silt and other foreign material to any form by any means and removing the same outside MoD land to a distance exc. 10 KM away and buried under ground complete all as specified and directed.

Cleaning desilting and emptying of existing septic tanks by mechanically including taking out sludge and other foreign materials and removing the same outside MoD land to distance exc 10 KM away and buried under ground complete all as specified and directed.

Dewatering of sludge water from septic tank, soak wells, manholes etc including loose liquid meet ash grease, and fiber & vegetations etc by means of mechanically power transport under foul conditions and removal of sludge/debris exc 500m & n.exc 1 KM and buried under ground complete all as specified and directed

Cleaning of blocked trap in kitchen/bathroom/WHB/sink/ Urinal etc by rodding or manually effected upto 1st manhole including kept work site clean and tidy complete all as specified and directed. Note for ser item No. 1.00 to 5.00 (i) Rate also includes for necessary tools and plants which is required to carryout the cleaning works ie. Cleaning rod, bucket, bamboo sticks, kasha etc. (ii) One supervisor with 02 safaiwalas shall be take complained from complained cell/JE Concerned & deployed required safaiwala to execute the work on daily requirement basis. (iii) Complained shall be completed in same day. Non completion of complained a penalty of Rs 200/- per complained per day shall be effected from the dues of the contractor. (iv) Necessary complained register and printed machine numbered complained slip as per specimen given by the Engineer-in-Charge shall also be provided by the contractor. (v) After completion of complained, complaint slip shall be signed by the users and re-submitting to the concerned JE/Engineer-in-Charge. (vi) Sewage safety norms shall be strictly adhered. (vii) Sludge shall be removed from site in covered vehicles. (viii) if there is any emergency to attand complaint on Sunday or Holiday, they should be present to attenad the complaint.

Excavation in trenches n.exc 1.50m wide and n.exc 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and exc 1.5 m but n.exc 3.0 m depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling including, levelling, watering and well ramming in layers n.exc 25cm thick each complete all as specified and directed.

Removing excavated material to a distance n.exc 50 m depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) cast insitu as in coping/benching including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels & drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred stopped ends etc complete all as specified and directed.

Demolition of reinforced cement concrete (reinforced cut as required to facilitate to demolition) of any description and in any portion not otherwise described complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and pavings not exceeding 15 cm thick(below or above ground) complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab for manholes septic tanks etc including necessary form work and set in CM 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

M&L Reinforced cement concrete 1:1.5:3 type A1Using 20 mm graded crushed stone aggregate as in slab supported on walls and columns complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregates as in beam, cantilever, bressumers, lintel band, lintel over 1.5m span complete all as specified and directed

Use and waste of Form work to sides of RCC lintel band rough finished surface of concrete flat square or rectangular or polygonal complete all as specified and directed

M&L Mild Steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L mild steel TMT bar 6 to 8 mm dia cut to lenth bnt to shape required including cranking , bending , spirally hooping for column, hookig ends and bindng with and including binding wire not less than 0.9 mm dia (annealed) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipe 150mm dia including packing under and haunching against the pipe after they are laid including necessary formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed to drain pipe 100mm dia including packing under and haunching against the pipe after they are laid including necessary formwork complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar for 100mm dia pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar for 150mm dia pipe complete all as specified and directed.

M&L for salt glazed stoneware drain pipe 100mm dia (internal) grade ‘A’ laid in trenches and jointed complete all as specified and directed.

M&L for salt glazed stoneware drain pipe 150mm dia (internal) grade ‘A’ laid trenches and jointed, complete all as specified and directed.

M&L for cutting in to existing manholes for connecting new drains pipe internal dia 100mm and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ sec) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required complete all as specified and directed.

M&L for cutting in to existing manholes for connecting new drains pipe internal dia 150mm and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ sec) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required complete all as specified and directed.

Dismantling AC/PVC 110mm bore rain water pipe (any size pattern) including all fittings, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F PVC (SWR) single ‘T’ equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl any radius, 110mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap of dia 75mm with grating, including solvent cement and fixed in position complete all as specified and directed.

Demolition of brick work or stone boulder built in cement mortar including all quoin, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any portion not otherwise described complete all as specified and directed.

M&L for brickwork with subclass ‘B’ old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description/layer on brick or stone wall including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of wrought iron work or mild steel work of any description not otherwise provided for fencing complete all as specified and directed.

M&L for rendering 20mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

S&F Mild steel work as in band straps, supports or stays for rain water pipe, ventilating pipes, including bolts, if required : hooks. Heavy, for large gates, hooks and Pintal Hinges, large hasp and stapples, hand made sliding bolts, clamps, hold hasts wall ties and similar small article etc conforming to Fe-290 Gde E- 165 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing of old plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling stone slab laid in floors, suspended floors, chajjas, landing,wall etc, or in any other position as deseribed any thickness, laid in dry/cement mortar complete all as specified and directed

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windows, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Dismantling of bricks (laid flat or on edge) or brick tiles or concrete tiles laid dry in floor, channels, kerbs, apron, etc(each layer) complete all as specified & directed

Demolition of cement concrete (unreinforced) in ground floors and Pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L 100mm thick PCC 1:4:8 type D2 as in sub base of floor complete all as specified and directed.

M&L for Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for rubber moulded prepolished coloured precast concrete interlocking paver block 60mm thick of any shape and size with white cement and pigment confirming to IS 15658-2006 M-35 Grade, over and including 50 mm average thickness sand cushioning complete all as specified and directed.

Use and waste of Form work to edges of concrete flat rough finished surfaces to the sides of RCC slab horizontal or sloping and similar work etc 10 cm but nexc 20 cm wide complete all as specified and directed.

M&L for painting lines, dashes, letters, arrows, etc on road pavement, by mechanical application of 1.5 mm thick hot thermoplastic road marking (reflective) strips of shade/colour as directed using automatic application machine including preparation and cleaning of surfaces complete all as specified and directed.

S&F in repair reflective road studs pavement markers(cateye) of category'A' single mould twin cylindrical shank of not less than 20mm dia and not less than 30mm length moulded in body made out of poly carbonate/ABS moulded body to support a load or 10 tonnes and reflective panels with micro oprismatic lens capable of providing total internal reflection of the light entering the lens face conforming to the MORTH circular No RW/NH 33023/10/97-DOIII fixed to the road surface using epoxy resin adhesive supplied by the manufacturer, length, height and width of the body not less than 100 mm, 15 mm and 90mm and base of flat within 1.3 mm andoutermost faces of configuration not deviating more than 1.3mm from flat surface. Lenses moulded of polycarbonate or methy/methecrylate, area of each retro reflectory surface not less than 13.0 sqcm, slope of retro reflectory surface 35 +- degree to the base, installed complete all as specified and directed

S&F in repair solar cateye pavement marker produced from engineered polymer for superior impact resistance and weather ability, dust and water ingress resistant body to support a load of 10 tonnes; with transparent top of for solar charging and light out put in active mode, having a solar panel (comprising of solar cells), storage device for storing the energy, LEDs for illumination and designed for providing 360 degree smooth illumination for 132 hours continuous lighting, having high reflective lenses for conspicuity in passive mode and dual shanks for improved roads presence, intended for application directly into pavement surfaces with epoxy resin adhesive supplied by the marker manufacturer, of dia136 ±4mm; installed complete all as specified and directed.

S&F in repair Tubular steel pipe 50 mm dia powder coated delinators 750 mm long with three white/ red color srips of retro reflective tape protected with wie mesh cage on top as per IRC 79-191 including necessary excavation , fixing in plain cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) and removal of excavated material outside defence land complete all as specified and directed.

S&F in repair PVC speed breakers 425mm wide and 75mm high, modular type in alternate black and yellow colour suitable to support a load of 50 tonnes provided with prismatic reflective panels fixed to the road surface with nurling nails of suitable length complete all as specified and directed.

M&L in repair for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 , including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Preparation of new concrete/plastered surfaces and applying two coats of synthetic enamel paint over a coat of priming paint plaster coat complete all as specified and directed.

Preparation of old conrete/plastered surfaces and applying one coats of synthetic enamel paint over existing surfaces complete all as specified and directed.

Raj Constructions

M/S RADHEY GOVIND ENTERPRISES

M/s Ram Naresh Construction Co.

Allied Builders